• The Journal of Korean Academy of Prosthodontics
• /
• v.34 no.4
• /
• pp.869-902
• /
• 1996

Flexion of a metal/ceramic fixed partial denture(EPD) frameworks under function can cause fracture of porcelain or deterioration of the cement seal. This study evaluated the flexion characteristics of three-unit mandibular FPD frameworks, repacing the second pre-molar under compressive load(200g, 400g). Testing was accompished with real-time holographic interferometry, using 6 porcelain fused-to metal frameworks. Tested alloys were non-precious alloy(Heracles, Holland), semi-precious alloy(Degudent U, Germany) and precious alloy(Degudent H, Germany). Changes of the fringe patterns according to the heat treatment(porcelain firing cycle), various loads(200g, 400g), occlusal forms(occlusal porcelain veneering, facial porcelain veneering), various alloys and post-soldering units were compared. Dental study model(Nissan dental products, Inc. D51DP-500A, Japan) and six 3-unit metal/ceramic fixed partial denture frameworks were used as experimental materials. 36 holograms were taken on fixed dental study model by using the 10mW He-Ne laser and real-time holographic interferometry. On the basis of this study, the following conclusions can be drawn : 1. In the frameworks for facial porcelain veneering, the semi-precious alloy framework was least deformed and precious alloy framework, non-precious alloy framework orderly before heat treatment, and the deformation was not shown great difference among three alloys after heat treatment and post-soldering. 2. In the frameworks for occlusal porcelain veneering, the precious alloy framework was greatest deformed and the deformation was not difference between semi-precious alloy framework and non-precious alloy framework before, after heat treatment, and the deformation was not shown great difference among three alloys after post soldering. 3. In the non-precious alloy frameworks for facial porcelain veneering and occlusal porcelain veneering, the deformation was greatly decreased after heat treatment and conversely increased after post-soldering. 4. In the semi-precious alloy framework for facial porcelain veneering, the deformation was not detectable after heat treatment and increased after post-solder. And in the frame-work for occlusal porcelain veneering, the deformation was slightly decreased after heat treatment and increased after post-soldering. 5. In the precious alloy framework for facial porcelain veneering, the deformation was greatly decreased after heat treatment and increased after post-soldering, And in the framework for occlusal porcelain veneering, the deformation was greatly decreased after heat treatment and decreased after post-soldering.

• The Journal of Korean Academy of Prosthodontics
• /
• v.53 no.4
• /
• pp.301-309
• /
• 2015

Purpose: The aim of this study was to evaluate the clinical performance of screw- and cement-retained implant prosthesis (SCP) design in terms of retained preload of abutment screws and cement washout. Materials and methods: Patients with the partial posterior edentulous areas comprised the study group. Implants were placed, and SCPs were delivered after 3 to 6 months healing. Follow-up examinations were performed. The implant survival rate and the prosthetic success rate were evaluated. The retained preload ratio of abutment screws and the prosthetic decementation ratio were measured. Results: Twenty one SCPs (forty three implants)in twenty patients were followed up to 64 months. All of the implants survived during the follow-up period (mean follow-up: 34 months). The prosthetic success rate was 100 % considering no abutment, screw, porcelain or metal frame fractures, as well as no screw loosening. The retained preload ratio of SCPs at the end of follow-up period was 97.61% (${\pm}16.29$) and the decementation ratio was 9.5 %. Conclusion: Within the limitations of this clinical study, SCP design showed favorable short-term clinical performances in respect of screw loosening and cement washout.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.32 no.2
• /
• pp.293-299
• /
• 2005

It is important to reduce chair time and procedure in restorative treatment for children. Composite resin is not only used in esthetic restoration of anterior teeth but also posterior teeth by its improved physical property. The 7th generation dentin bonding system was recently developed in order to simplify three steps which is needed to bond composite resin to tooth surface-etchant, primer, adhesive. We compared shear bond strengths of 4, 5, 6, 7th generations dentin bonding systems. The primary dentin was pretreated with 4, 5, 6, 7th generation dentin bonding systems. Then composite resin was cured to the specimen using molds 2.5mm in diameter and 2mm in height. Thermocycling was performed and shear bond strength was finally measured. The results were as follow; 1. The mean values of shear bond strengths in 5th generation dentin bonding system(group 2) were greater than those of 4, 6, 7th generation dentin bonding system(group 1, 3, 4). The differences were statistically significant. 2. The mean values of shear bond strengths in 4th generation dentin bonding system(group 2) were greater than those of 6, 7th generation dentin bonding system(group 1, 3, 4). But, the differences were not statistically significant. 3. Between the mean values of shear bond strengths in 6, 7th generation dentin bonding system(group 3, 4) were similar.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.25 no.1
• /
• pp.61-71
• /
• 2009

Anchorage control is important in orthodontic treatment. Recently miniscrew is widly used as maximum anchorage in orthodontic treatment, and then it is important to install miniscrew safely without damaging adjacent anatomic structure. In a view of Miniscrew's stability, maxilla is unfavorable than mandible, and moreover maxillary soft buccal bone has disadvantage on stability. so palatal area comes into notice for installation area. We measured distance between palatal roots and bone thickness at midpalatal area using 3D computed tomography, and have found following results. 1. On the comparison of distance between palatal roots, the distance between 2nd premolar and 1st molar was significantly longest and the distance between premolars was significantly shortest. 2. Going toward lateral area from midpalatal suture and posterior area from zero point, bone thickness significantly became shorter and shorter. And 5.0mm palatal sagittal plane has more significance decrease of bone thickness than 2.5mm palatal sagittal plane. According to these results, we can conclude that the palatal installation of miniscrew between 2nd premolar and 1st molar is safest. And it is more safe that comes closer to midpalatal suture and to anterior area in regard to incisive canal.

• Restorative Dentistry and Endodontics
• /
• v.30 no.5
• /
• pp.363-371
• /
• 2005

This study investigated the effect of thickness of flowable resin lining on marginal leakage in class II composite restorations. 80 experimental teeth were prepared with class II preparations with enamel margin or dentin margin. Each group was devided into four groups according to flowable resin lining thickness ; Control group - no flowable resin lining, Group 1 - 0.5 mm flowable resin lining, Group 2 - 1 mm flowable resin lining, Group 3 - 2 mm flowable resin lining. The cavities were restored using Scotchbond Multi-Purpose adhesive system, Filtek Flow and Filtek Z 250 composite resin. Following one day storage in distilled water, the restored teeth were thermocycled for 500 cycles and immersed in $2\%$ methylene blue for 24 hours. The results of this study were as follows : 1. Ranking of mean microleakage scores at the enamel margins was Group 1 < Control = Group 2 < Group 3. The microleakage of Group 3 was significantly higher than that of Control, Group 1 and Group 2 (p < 0.05). 2. Ranking of mean microleakage scores at the dentin margins was Group 1 < Group 2 < Control < Group 3. The microleakage of Group 3 was significantly higher than that of Control, Group 1 (p < 0.05) 3. Compared with microleakage between the enamel and dentin margins, enamel margin group were significantly lower than dentin margin group.

• Restorative Dentistry and Endodontics
• /
• v.27 no.3
• /
• pp.249-256
• /
• 2002

The use of flowable composite resins as liners in class II packable composite restoration has been suggested by some manufacturers. However, the contributions of this technique are unproven. The purpose of this study was to compare the gingival microleakage in class II packable composite restorations with or without the use of flowable composite resins as liners. Slot cavities were prepared on both proximals of 80 extracted human molars and randomly assigned to 8 groups of 20 each. The gingival margins were located at 1mm above CEJ in 80 cavities (group1-4) and 1mm below CEJ in 80 cavities (group5-8). The prepared teeth were mounted in the customized tray with adjacent teeth to simulate clinical conditions and metallic matrix band (Sectional matrix) and wooden wedges were applied. After acid etching and application of Single Bond, each group was restored with the following materials using incremental placement technique: Group 1,5 (Filtek P60), group 2, 3, 4 and group 6, 7, 8 (AeliteFlo, TetricFlow, Revolution/ Filtek P60). All specimens were thermocycled 500 times between 5$^{\circ}C$ and 55$^{\circ}C$ with 1 mimute dwell time, immersed 2% methylene blue dye for 24 hours and then rinsed with tab water. The specimens were embedded in clear resin and sectioned longitudinally through the center of restoration with a low speed diamond saw. Dye penetration at gingival margin was viewed at 20 magnification and analyzed on a scale of 0 to 4. Kruscal-Wallis One way analysis and Mann-Whitney Rank sum test were used to analyze the results. The results of this study were as follows. 1. The leakage values seen at the enamel margin were significantly lower than those seen at the dentin margin(P<0.05). 2. On the enamel margin, packable composite resins with flowable liners showed lower leakage than those without flowable liners, but there were no significant differences among the four groups(P>0.05). 3. On the dentin margin, four groups demonstrated moderate to severe leakage, and there were no significant differences in leakage values(P>0.05).

• The korean journal of orthodontics
• /
• v.31 no.1 s.84
• /
• pp.1-13
• /
• 2001

The extraction lot orthodontic treatment can be adopted for aligning crowded dentition, improving facial esthetics and solving a skeletal discrepancy as alternative for a surgical option. Mandibular second premolar extraction was often selected as treatment plan when there we very little or no space shortage in lower arch or limited retraction of the lower incisors was required. The primary object of this study was evaluate a pretreatment condition and examine the amount of tooth movement ior a mandibular second premolar extraction in growing patients. Pretreatment and posttreatment lateral cephalograms of 14 cases that had their four first premolar extracted (4/4 group), 15 cases with upper first and lower second premolar extraction (4/5 group) were selected. Structural method superimposition was conducted to evaluate a difference of dental change between 4/4 and 4/5 group. The results were as follows, 1. Pretreatment factor for 4/4 extraction or 4/5 extraction choice included maxillary incisor axis to occlusal plane, Class II molar relationship, IMPA and interincisal angle. 2. The amount of molar anterior movement in 4/5 group was greater than that of 4/4 group(p<0.05). 3. There was no significant difference between 4/4 group and 4/5 group in aspects of maxillary tooth movement(p<0.05).

• Journal of Oral Medicine and Pain
• /
• v.31 no.4
• /
• pp.337-346
• /
• 2006

Aims: The present study investigated the relationship between condylar resorption and craniofacial skeleton types(especially vertical relationships), the differences of craniofacial skeleton types between with open bite group and without open bite group, and the associations of anterior disc dislocation with or without reduction to condylar resorption with MRI. Patients selection and methods: Clinical examination, magnetic resonance imaging (MRI), panorama, lateral transcranial and lateral cephalometric radiographs in 34 patients with condylar resorption were used to investigate this relationship. Results and Conclusions: Patients with the following specific facial morphologic characteristics appear to be most susceptible to condylar resorption: (1) females were predominant, (2) patients' age ranged from 12 to 50 years old with a strong predominance for 2nd and 3rd decades, (3) patients had high mandibular plane angle and high gonial angle, (4) patients had decreased vertical height of the ramus, (5) patients had generally significant antegonial notch, (6) patients had predominance of Class I occlusal relationship with or without open bite but mandible was retruded as mean ANB 5.54 degrees, (7) condylar resorption rarely occurs in lower mandibular plane angle facial types, (8) although no statistically significant difference was found, the open bite group had a tendency more hyperdivergent skeletal pattern than the non open bite group, and (9) imaging demonstrates from small resorbing condyles to idiopathic condylar resorption and TMJ articular disc dislocations. Thus, morphologic features of patients with vertical discrepancies may represent a risk factor for the development of condylar resorption.

• Journal of Oral Medicine and Pain
• /
• v.37 no.2
• /
• pp.125-133
• /
• 2012

TMJ Osteoarthritis is a degenerative disease caused by overload on joint tissue, and often accompany with local tenderness on the joint, crepitus by mandibular movement, restriction of mandibular movement, and anterior openbite. In general, panoramic radiography, TMJ panoramic radiography, and transcranial radiography are conducted to diagnose osteoarthritis after clinical examination, however, these radiographic evaluations are limited in detecting minute bony changes of early pathologic lesion. The aim of this pilot study was to evaluate the limitation and usefulness of several TMJ imaging techniques, so we compare the findings from clinical examination, plain film radiographs, tomograph, and bone scan from 81 patients with temporomandibular joint disorder. The proportion of patients showing same findings in plain film radiographs, TMJ tomograph, and bone scan was high, however, it is desirable that clinician should conduct phased imaging examinations according to the clinical findings due to the possibilities of false negative findings in diagnosis of osteoarthritis.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.25 no.2
• /
• pp.399-408
• /
• 1995

The purpose of this study was to obtain information on the clinical and radiographic features of the dentigerous cysts in the jaws. For this study, the authors examined and analysed the clinical records and radiographs of 233 patients who had lesions of dentigerous cyst diagnosed by clinical and radiographic or histopathological examinations. And the obtained results were as follows: 1. Dentigerous cysts occurred the most frequently in the 2nd decade(38.2％) and occurred more frequently in males(67.4％) than in females(32.6％). 2. The most common clinical symptom was swelling of the jaw(33.9％), and the lesions were treated by the method of surgical removal. 3. The type of lesions was mainly observed as central type(72.5％), and size of the lesion was most frequently observed 2 - 2.9cm in the widest length. 4. The lesions were most frequently observed well-defined outline with hyperostotic border(49.8％), and smooth margin(73.4％), and homogeneous lesional radiolucency(79.4％). 5. Cortical thinning and expansion of the lesions(82.0％) were observed, and their direction were most frequently observed toward buccal side(64.0％). 6. The effect on the causative tooth were observed as tooth displacement(41.2％) and delayed root development(l9.3％), and the distance between cemento-enamel junction and lesional wall attachment of the causative tooth was mainly observed as below 2mm(79.6％). 7. The effect on the adjacent tooth were observed as loss of lamina dura(66.8％), root resorption(33.9％), and tooth displacement(31.5％). 8. The effects on the adjacent anatomic structures were observed as displacement of the mandibular canal(46.5％) and maxillary sinus or nasal cavity(72.2％).