• The Journal of Korean Academy of Prosthodontics
• /
• v.47 no.2
• /
• pp.191-198
• /
• 2009

Statement of problem: Ceramics have been important materials for the restoration of teeth. The demands of patients for tooth-colored restorations and the availability of various dental ceramics has driven the increased use of new types of dental ceramic materials. Improved physical properties of theses materials have expanded its use even in posterior crowns and fixed partial dentures. However, ceramic still has limitation such as low loading capability. This is critical for long-span bridge, because bridge is more subject to tensile force. Purpose: The wire reinforced ceramic was designed to increase the fracture resistance of ceramic restoration. The purpose of this study was to evaluate the fracture resistance of wire reinforced ceramic. Material and methods: Heat pressed ceramic(ingot No.200 : IPS Empress 2, Ivoclar Vivadent, Liechtenstein) and Ni-Cr wire(Alfa Aesar, Johnson Matthey Company, USA) of 0.41 mm diameter were used in this study. Five groups of twelve uniform sized ceramic specimens(width 4 mm, thickness 2 mm, length 15 mm) were fabricated. Each group had different wire arrangement. Wireless ceramic was used as control group. The experimental groups were divided according to wire number and position. One, two and three strands of wires were positioned on the longitudinal axis of specimen. In another experimental group, three strands of wires positioned on the longitudinal axis and five strands of wires positioned on the transverse axis. Three-point bending test was done with universal testing machine(Z020, Zwick, Germany) to compare the flexural modulus, flexural strength, strain at fracture and fracture toughness of each group. Fractured ceramic specimens were cross-sectioned with caborundum disc and grinded with sandpaper to observe interface between ceramic and Ni-Cr wire. The interface between ceramic and Ni-Cr wire was analyzed with scanning electron microscope(JSM-6360, JEOL, Japan) under platinum coating. Results: The results obtained were as follows: 1. The average and standard deviation in flexural modulus, flexural strength and fracture toughness showed no statistical differences between control and experimental groups. However, strain was significantly increased in wire inserted ceramics(P<.001). 2. Control group showed wedge fracture aspects across specimen, while experimental groups showed cracks across specimen. 3. Scanning electron microscopic image of cross-sectioned and longitudinally-sectioned specimens showed no gap at the interface between ceramic and Ni-Cr wire. Conclusion: The results of this study showed that wire inserted ceramics have a high strain characteristic. However, wire inserted ceramics was not enough to use at posterior area of mouth in relation to flexural modulus and flexural strength. Therefore, we need further studies.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.27 no.2
• /
• pp.149-159
• /
• 2011

Restoring and replacing teeth with fixed prostheses commonly used in dental practice. Because of improper oral hygiene care and inaccurate laboratory procedure, complication of fixed prostheses was found in the mouth of patient. Although many efforts have been continually made to obtain the data of long term prognosis of fixed prostheses, it was difficult to do it. The purpose of this study was to evaluate the clinical status of fixed prostheses to improve the quality of dental care. In order to assess the clinical status of fixed prostheses, a total of 154 individuals (aged 22-82, 88 women and 66 men loaded with 578 unit of fixed prostheses, and 423 abutments) who visited the Department of Prosthodontics, Pusan National University Hospital, between January 2009 to December 2009 and removed old fixed prostheses were examined. The results of this study were as follows: 1. Length of service of fixed prostheses was $10.3{\pm}05.5$ years (mean), 10.0 years (median). 2. Location of fixed prostheses was found to have statistically significant influence on longevity of fixed prostheses (P<.05). The longevity of fixed prostheses was high in anterior-posterior combination region (mean:13.1, median:13.5) than anterior and posterior region. 3. Longevity of fixed prostheses made of metal was longest (mean:13.3, median:12.3). 4. Number of units in fixed prostheses was found to have no statistically significant influence on longevity of fixed prostheses (P>.05). 5. Condition of opposing dentition was found to have statistically significant influence on longevity of fixed prostheses (P>.05). The fixed prostheses lasted longest when opposed by complete denture (mean:17.1, median:19.7), removable partial denture, fixed prosthesis and natural dentition trailing behind (P<.05) 6. Periodontal disease (37.5%), dental caries (19.0%), defective margin (18.4%) were frequent complications. In 33.1% of the cases, abutment state after removing fixed prostheses was needed to be extracted.

• The Journal of Korean Academy of Prosthodontics
• /
• v.52 no.4
• /
• pp.317-323
• /
• 2014

Dentinogenesis Imperfecta, with a high incidence rate of 1 : 6 - 8000, is inherited by autosomal dominant genetic transmission. This dental disorder causes discoloration of the teeth and the enamel and dentin show hypoplastic or hypocalcified defects which lead to frequent fractures and rapid attrition. Therefore, timely treatment is necessary for the preservation of the remaining teeth. In this particular case, a 19-year-old patient suffering from Type 1 dentinogenesis imperfecta showed signs of brownish hued teeth with multiple fractures, a loss of vertical dimension, excessive interdental space in the maxillary anterior teeth, and a lack of 5 posterior teeth. To improve the esthetic appearance of the anterior teeth, the vertical dimension was increased. Resin caps were used to alleviate the difficulty of taking an impression of multiple teeth at once. Monolithic zirconia materials used in this case showed high fracture strength and the ability to mask the discoloration of the teeth and therefore, functionally and esthetically favorable results were achieved.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.43 no.1
• /
• pp.27-35
• /
• 2016

The present study aimed to assess the perception of a child's primary caregiver on the oral health-related quality of life (OHRQoL) of dental treatment under general anesthesia (GA) or intravenous sedation (IV-SED) in pediatric dental patients. Self-administered questionnaires were completed before dental treatment under GA or IV-SED by 52 primary caregivers of healthy pediatric patients (10 years old or younger), and 43 (84%) of these caregivers completed the same questionnaires within 6 months after treatment. The Korean version of Child Oral Health Impact Profile (COHIP) and the Family Impact Scale (FIS) were used to assess OHRQoL in the questionnaires. The scores of COHIP and FIS improved after dental treatment. Demographic variables such as gender did not affect the improvement of COHIP and FIS, and age did not affect that of COHIP. However, baseline FIS score of younger patients was better than that of older patients before dental treatment. Regardless of the treatment variables, all COHIP and FIS scores were improved after dental treatment. COHIP score improved more in cases with pulp treatments compared to those without the treatments. On the other hand, FIS score improved less in cases with posterior stainless steel crown restorations compared to those without them. Anterior esthetic restorations and anterior teeth extractions did not affect the degree of improvement. Based on the primary caregiver's perceptions, the OHRQoL of healthy pediatric patients was improved by dental treatment under GA or IV-SED.

• Journal of Oral Medicine and Pain
• /
• v.26 no.3
• /
• pp.261-276
• /
• 2001

본 연구는 구강안면동통 중에서 빈번히 나타나는 근육성 동통의 주 원인인 저작근의 과활성으로 유발된 근육의 피로 시에 운동단위전위, 압력통각역치, 근전도 power spectrum의 변화 양상과 이들 척도간의 연관성을 조사하기 위해 시행되었다. 두개하악장애의 병력 및 현증이 없고 정상적인 구치부 교합관계를 가진 평균연령 25.8세인 36명의 정상 성인(남자 26명, 여자 10명)을 대상으로 교근과 전측두근의 지속적인 등길이 수축 전후의 압력통각역치 및 운동단위전위를 측정하였고 인내시간까지의 근수축 동안 근전도 power spectrum을 분석하여 다음과 같은 결론을 얻었다. 1. 지속적인 등길이 수축 후 교근과 전측두근의 압력통각역치는 수축 전에 비해 유의하게 감소하였다. 2. 압력통각역치는 수축 전과 수축 후 모두에서 전측두근이 교근보다 유의하게 높게 나타났으며, 전체적으로 남성이 여성보다 높게 나타나는 양상을 보였으나 성별간의 차이는 전측두근의 수축 후 압력통각역치에서만 통계적으로 유의하게 나타났다. 3. 지속적인 등길이 수축말기의 중간주파수는 수축초기에 비하여 유의하게 감소하였고, 전측두근의 수축초기 중간주파수와 수축말기 중간주파수 모두 교근보다 유의하게 높게 나타났다. 4. 교근은 지속적인 등길이 수축 전에 비하여 수축 후의 운동단위전위의 지속시간,진폭, 면적, 상의 4가지 척도에서 유의한 증가를 보였고 전측두근은 진폭을 제외한 나머지 3가지 척도, 즉 지속시간, 면적, 상의 유의한 증가를 보였다. 5. 교근과 전측두근의 지속적인 등길이 수축 전의 압력통각역치와 운동단위전위 척도 사이에는 통계적으로 유의한 상관관계가 없었고 교근에서는 수축 후의 압력통각역치와 운동단위전위의 지속시간, 진폭, 면적, 상 사이에 유의한 상관관계가 존재하였다. 위의 실험결과를 통해 근육피로 검사에 압력통각역치, 근전도 power spectrum 검사 외에 근육수축의 기능적 최소 단위인 운동단위전위의 분석 또한 유용할 수 있고 추후 만성으로 진행된 근막동통환자와 정상 대조군간의 운동단위 수준에서의 비교연구와 근피로에 더욱 민감한 운동단위전위의 다른 척도에 대한 개발과 연구가 필요하다고 사료된다.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.39 no.3
• /
• pp.301-305
• /
• 2012

The odontoma is a hamartoma of odontogenic origin and consists of enamel, dentin, cementum and pulp tissue. Two types of odonotma are histologically recognized: complex and compound. Odontoma may be the cause of noneruptoin or impaction of teeth, formation of cyst and resorption of adjacent bone. The recommended treatment for an odontoma is conservative surgical excision. No propensity for recurrence has been noted. Peripheral odontoma is relatively rare lesion and shows the histological characteristics of an intraosseous odontoma. This report described a 3-year-old Korean girl with a firm gingival mass in the posterior mandibular area, which had been gradually enlarging over 18months. Radiographic examination showed a radiopaque mass but no evidence of underlying intraosseous lesion. Excisional biopsy was performed for the mass removal and histopathological examination. The result of histopathological study was identified as hamartous supernumerary tooth germ. Based on the clinical presentation, radiographic and histopathologic findings, we concluded that the final diagnosis was peripheral odontoma. For three years after surgery, there is no clinical sign of recurrence.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.47 no.2
• /
• pp.99-108
• /
• 2020

This study was performed to evaluate the effectiveness of the 2-step needle insertion technique to reduce pain during local anesthesia in children. Local anesthesia was performed bilaterally using conventional technique and a 2-step technique, and to compare the degree of pain using the 2-step with that using the conventional technique during local anesthesia using a pain scale. The pain scores were significantly different between the conventional technique and the 2-step insertion technique at 5.82 ± 2.14 and 2.57 ± 2.09, respectively (p < 0.001). The subjective degree of pain based on gender, age, and Frankl's behavior rating scale was significantly lower in the 2-step insertion technique (p < 0.001). Subjective pain levels in the area of maxilla and mandible, anterior and posterior parts were lower in the group treated using the 2-step insertion technique (p < 0.001). The 2-step insertion technique is a simple and effective way to reduce pain during local anesthesia not only in children with a positive attitude to dental treatment, but also in children with negative attitudes, and is thought to be more effective if combined with application of topical anesthesia or distraction.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.36 no.2
• /
• pp.128-137
• /
• 2020

Over the last 30 years, the use of chairside computer-aided design (CAD) and computer-aided manufacturing (CAM) systems has evolved and has become increasingly popular in dentistry. Although CAD/CAM restorations have been used in the anterior dentition, satisfying the esthetic requirements of clinicians and patients, where the restorations are limited to the chairside, remains a challenge. To reproduce multi-shades of CAD/CAM restorations in the clinic, a preliminary experiment to express several shades on A2 lithium disilicate (LS2) blocks using a staining kit was performed. After measurement of the CIE L^*a^*b^* value of specimens, it was compared with that of the commercial shade guide. This report presents two cases with individual customization of shade and surface characterization of the CAD/CAM restorations using predictable methods based on the preliminary experimental data. The anatomical shape of restoration was obtained from 'copy and paste technique' and 'mirror image acquisition technique'. All treatment procedures and fabrication of restorations performed in this report were executed in the clinic itself.

• The korean journal of orthodontics
• /
• v.39 no.2
• /
• pp.105-111
• /
• 2009

Objective: To estimate the effects of bracket material type on enamel decalcification during orthodontic treatment, this study analyzed the adhesion level of mutans streptococci (MS) to orthodontic bracket materials in vivo. Methods: Three different types of orthodontic bracket materials were used: stainless steel, monocrystalline sapphire, and polycrystalline alumina. A balanced complete block design was used to exclude the effect of positional variation of bracket materials in the oral cavity. Three types of plastic individual trays were made and one subject placed the tray in the mouth for 12 hours. Then, the attached bacteria were isolated and incubated on a mitis salivarius media containing bacitracin for 48 hours. Finally, the number of colony forming units of MS was counted. The experiments were independently performed 5 times with each of the 3 trays, resulting in a total of 15 times. Mixed model ANOVA was used to compare the adhesion amount of MS. Results: There was no difference in colony forming units among the bracket materials irrespective of jaw and tooth position. Conclusions: This study suggested that the result of quantitative analysis of MS adhesion to various orthodontic bracket materials in vivo may differ from that of the condition in vitro.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.32 no.1
• /
• pp.101-108
• /
• 2005

Children are in mixed dentition during 6 years after 3 years old. this time is very important for sound permanent dentition. There are many factors of influence to tooth eruption stage ; adjacent teeth, tooth resorption, early loss or retention of deciduous tooth, local lesion, lip and tongue, masticatory muscles, ect. These factors should be in balance, if not, relation of adjacent teeth is changed, then severe malocclusion is occurred maybe. These cases revealed influences of resin bonded metal splint on occlusal surface of children's molar to mixed dentition. Splints interfere with falling off of deciduous tooth, tooth eruption, normal occlusion formation, and development of mixed dentition and occlusion. Therefore we removed the metal splint from teeth, follow-up checked occlusion and tooth eruption.