• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.6
• /
• pp.1161-1166
• /
• 2017

Recently, with the development of display technology, AMOLED(Active Matrix OLED) panel production and demand are increasing. Unlike LCD, AMOLED panel basically does not need backlight, so it can output clear images with low power consumption. Therefore, the AMOLED market is growing globally. Accordingly, the demand for inspection devices required for production is also expanding. The inspection device of the AMOLED panel aging system operates in conjunction with MES(Manufacturing Execution System) and MIS(Management Information System), and it is efficient to construct network environment. The inspection device used for panel aging is a pattern generator capable of outputting multiple signals. Efficient design is required to operate multiple signal generators. To solve this problem, the proposed system proposed a method for remotely controlling the signal generator remotely and a method for driving the AMOLED panel. And the timing and power setting results are presented.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.11
• /
• pp.139-147
• /
• 2016

This study described the design scheme for each step of the production test for the Fire Control System(FCS) of the K-55A1 PIP business of Hanwha Thales since 2011. From the time of receipt of the product It is necessary to improve the FCS's reliability by using the Unit Test, burn-In test, System Test. FCS of K-55A1 acts as a 'head' that control the self-propelled howitzer, and connected with the electrical and physical connection of self-propelled howitzer's multiple unit (Inertial navigation systems(IN), Muzzle Velocity Radar (MVR)) for the normal operation without an inch of error in operating. We designed the production testing equipment automatically as much as possible and designed with the environment similar to the self-propelled howitzer. by using this production testing equipment, It should help for the strengthen national defense of the Republic of Korea.

• Journal of the Korea Convergence Society
• /
• v.7 no.6
• /
• pp.75-80
• /
• 2016

Distraction osteogenesis is applied to correct mandible or maxilla deformities. Owing to the distractor being away from the skin, it is not aesthetic. Infection can arise due to manual part. And therefore, it is necessary to make the distractor using a new mechanism. 3D software was used for the intraoral distractor modeling. 3D meshes were used to analyze the stress distribution of the distractor was analyzed using Finite element analysis software. This research developed a intraoral distractor for continuous mandible distraction through convergence study. Base on the results, it provide helpful data for future version of the wireless intraoral distractor in other fields of bio and medical engineering.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.43 no.3 s.309
• /
• pp.51-59
• /
• 2006

In this paper, we propose an excellent ultrasonic transceiver system based on a QPSK modulation technique for underwater communication. The transmitter sends a still image at the level of 187dB re $1{\mu}Pa/V@1m$ through a power amplifier by driving an ultrasonic sensor. The receiver performs digital conversion at the 100kHz sampling frequency, demodulation and decoding process for the image sent from the transmitter through the underwater communication. We have shown that the processed image at the receiver is almost the same as the orignal one. The maximum detection distance of the system proposed in this paper is approximately 1.17km. To cope with the difficulties of transmission loss, this paper proposes, implements and analyzes important parameters of sensors and circuits used in the system. Most of the underwater communication has focused on the transmission of audio signal, but this paper suggests an efficient underwater communication system for still image transmission.

• Journal of The Korean Association of Information Education
• /
• v.14 no.2
• /
• pp.273-283
• /
• 2010

Emergent process or behaviour can be seen in many places, from any multicellular biological organism to traffic patterns, cities or organizational phenomena in computer simulations. Similarly, the concept of 'Green IT' refers to the way complex systems and patterns arise inevitably among groups due to environmental concerns in real world. Green IT has good possibility to evolve as very chaotic system, in which the number of interactions between components increases geometrically with the number of components, thus potentially allowing for many new types of behaviour to emerge. However, when Green IT system regards as a complexity one, there exits some attractors to derive and control the system. In this context, this paper presents a new model based on type-2 fuzzy logic system to identify and assess the attractors of Green IT system which correspond to Reach-Richness matrix of Green IT.

• Journal of Internet of Things and Convergence
• /
• v.3 no.1
• /
• pp.25-31
• /
• 2017

In the future a future type new city and the latest apartment will be built, and the IoT technology will be constructed and combined in large numbers indoors of ordinary households. An air cleaner that makes people in it comfortable is built in, and the suction port that sucks in the air of the air purifier and the discharge port that discharges it are set up around the room and come out. However, this is impossible to adjust because there is only a central switch on / off. Also, consuming a lot of electricity so that many electricity charges are caused by huge electricity consumption will eventually be a waste of resources. This would like to be adjusted and driven through the fine dust detection device to the room built-in air purifier and that has provided a solution to save electricity. In addition, since it exists in and around the room, you can grasp the position of the person and connect to the home network to enhance the convenience. Also, through analysis of the air, we provide a health-check solution that checks the user's health and adjusts it appropriately.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.12
• /
• pp.2820-2827
• /
• 2015

HSMS communication system using low-cost micro controller units(MCUs) is an essential technique for online semiconductor equipment system developments. It is intended as an alternative to SEMI E4 (SECS-I) for applications where higher speed communication is needed and the facilitated hardware setup is convenient. In this paper, an HSMS communication system using low-cost MCUS is designed and implemented. Using a MCU with a low price but high-performance as a main board, a module which processes HSMS communication is designed, and a circuit is designed to process BCR independently with a microminiature MCU. To convert tag data which is recognized from BCR into data based on HSMS communication protocol, SECS-II message is designed. Lastly, an HSMS communication system is implemented based on these designs. A low-cost HSMS communication module developed in this study can be applied in realtime monitoring and controlling system for semiconductor processes.

• Journal of Energy Engineering
• /
• v.19 no.2
• /
• pp.62-72
• /
• 2010

Solid oxide fuel cells(SOFCs) directly convert the fuel gases to electric energy through electrochemical reactions. The advantage of SOFCs is that they easily operate with diversified fuels such as natural gases owing to their high temperature operation. However, high temperature operation also incurs the challenge in enhancing long term reliability and durability of SOFCs. The most commonly used anode material is Ni/YSZ. This has, however, some drawbacks in terms of long-term reliability at high temperatures, hydrocarbon fuel usages, and so on, therefore the need to develop the new anode materials increases. This article summarizes the trend of the novel anode materials development of SOFCs.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.14 no.1
• /
• pp.11-18
• /
• 2011

Wave overtopping reef system with guide vanes convert incident wave energy on the reef type structures into electric power. Previous studies decided shape parameters likes slope, height of the sloping arm and shape of guide vane. In this paper, using these shape parameters produce 1/7 scale model and construct integration scale model system combining water pressure head turbine, power generation, power control, operating control and monitoring system. In these systems, we measure the overtopping and power generation with different wave heights and periods and compare the results with the previous studies. This was confirmed designed overtopping and power generation, then we suggest efficient control system.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.15 no.2
• /
• pp.173-178
• /
• 2005

This paper focuses on the use of the virtual dialog system whose aim is to build more convenient living environments. In order to realize this, the main emphasis of the paper lies on the description of the multimedia signal processing on the basis of the technologies such as speech recognition, speech synthesis, video, or sensor signal processing. For essential modules of the dialog system, we incorporated the real-time speech recognizer based on HM-Net(Hidden Markov Network) as well as speech synthesis into the overall system. In addition, we adopted the real-time motion detector based on the changes of brightness in pixels, as well as the touch sensor that was used to start system. In experimental evaluation, the results showed that the proposed system was relatively easy to use for controlling electric appliances while sitting in a sofa, even though the performance of the system was not better than the simulation results owing to the noisy environments.