• Proceedings of the IEEK Conference
• /
• 2001.06d
• /
• pp.119-122
• /
• 2001

본 논문에서는 음성압축 앨고리즘인 MPEG-4 CELP coder를 16 bit DSP 구현에 필요한 고정소수점 연산구조로 구현하였다. 기본 앨고리즘 중에 LSP 계수를 구하는 방법인 Chebyshev series method 대신 고정소수점 구현에 유리한 Real root method 앨고리즘을 사용하였다. 또한 cosine, log 둥 DSP 명령어가 지원하지 않는 수학 함수들은 미리 계산하여 테이블 적용기법을 사용하였고 고정 소수점 연산에 불리한 나눗셈 연산을 최대한 배제하였다. 고정 소수점 연산 구조로 변환한 후 부동 소수점 연산구조와의 비교를 통하여 오차를 최소화하도록 하였다 구현한 음성코더를 남, 여 각 5문장에 적용했을 때 부동 소수점 연산구조에 비교해 음질의 열화가 없음을 확인하였다.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1996.06a
• /
• pp.41-43
• /
• 1996

동해의 경우 강한 극전선이 존재하여 복부해역과 남부해역의 음속구조는 커다란 차이를 보이고 있다. 이러한 해역에서 평균음속구조를 구하여 표준해양을 설정할 경우 음파 전파경로의 차이가 커지게 된다. 따라서 이러나 해역에서 해양음향 토모그래피를 이용한 해양탐사를 수행하기 위해서는 해역별로 다른 음속구조를 가지는 표준해양의 설정이 필요하며 이를 근거로 음파의 전파경로 및 음속구조를 표준해양으로 설정하여 수온 및 수중음속의 변동량을 역추정하는 방법을 이용하고 있다. 본 연구에서는 인위적인 극전선을 설정하고 해역별 특징을 갖는 표준해양을 설정하여 음파 도달시간의 기준을 설정하고 음속구조의 역추정을 수행하여 기존의 해양음향 토모그래피에 의한 해양탐사 방법과 비교하였다. 그 결과 기존의 해양음향 토모그래피를 이용한 역추정에서는 전선의 형태를 재현하기 위해서 여러 개의 음원과 수신기가 필요하였으나 거리종속 표준해양을 이용할 경우 그 수가 줄어도 가능하고 평균오차고 작아지는 결과를 얻었다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.7 no.1
• /
• pp.46-51
• /
• 2006

We present simulation results for a method designed to extract key parameter values of DFB-type LDs based on ASE spectrum measurements. Comparisons were made between the given (actual) and the extracted (estimated) parameters, as well as the associated spectra, fur a variety of DFB-type LDs, and the two sets of results were found to be in excellent agreement.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.18 no.12
• /
• pp.1994-2000
• /
• 1993

A new lattice structure using decision feedback and augmented prediction for estimating and suppressing the narrowband interference is presented. The performance of the proposed interference canceller is compared to the conventional interference cancellation filter. The reference signal of the interference canceller is formed by using the chip decisions, which is correlated with the narrowband interference components of the received signal. The decision feedback technique reduce the distortion of the desired signal which is introduced by the interference canceller through the use of feedback chip decisions. And by linear prediction of the error signal, the residual interference component of can be eliminated, Using this unconteminated error signal to update the adaptive filter coefficients, the performance of the rejection can be improved. In the simulation, it is assumed that the processing gains are 7 and 15, signal to interference ratio is -10[dB], and 5% interference band. The results show that the BER performance of the proposed filter structure is improved by 1~3dB.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.13 no.3 s.55
• /
• pp.101-109
• /
• 2009

An algorithm is proposed for estimating dynamic displacements of a bridge by using FBG sensors and by superposing some measurable low modes. Modal displacements are obtained from the beam theory and the generalized coordinates are deduced from the strains measured by FBG sensors. By considering flexural and torsional modes occurred in bridges only as flexural modes of a simply supported beam by separating a bridge into multiple girders or parts, the proposed algorithm can be applied to various types of bridges. Guidelines are provided theoretically for determining the number of modes and the number of strain gages to be used. The proposed algorithm has been examined through simulation studies on various types of bridges, laboratory experiments on a model bridge, and field tests on a simple span PC Box girder bridge. Through the simulation study, the effects of the error in the vibration modes and measurement noise on estimating the dynamic displacements are analyzed.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.14 no.4
• /
• pp.525-535
• /
• 2001

In this paper, a new adaptive analysis scheme for element-free Galerkin method(EFGM) is proposed. The novel point of this scheme is that the triangular cell structure based on the Delaunay triangulation is used in the numerical integration and the node adding/removing process. In adaptive analysis with this scheme, there is no need to divide the integration cell and the memory cell structure. For the adaptive analysis of crack propagation, the reconstruction of cell structure by adding and removing the nodes on integration cells based the estimated error should be carried out at every iteration step by the Delaunay triangulation technique. This feature provides more convenient user interface that is closer to the real mesh-free nature of EFGM. The analysis error is obtained basically by calculating the difference between the values of the projected stresses and the original EFG stresses. To evaluate the performance of proposed adaptive procedure, the crack propagation behavior is investigated for several examples.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.11 no.12
• /
• pp.1209-1218
• /
• 2016

In order to safely and speedily transport a load such as a large glass plate using four electric cylinders, the synchronous error outside the permitted range should not be continuously generated between the cylinders. In this study, a methodology of synchronous control which can be applied to synchronization of four or more cylinders is developed. The synchronous control system based on the decoupling structure is composed of a reference model, position and synchronous controllers in the respective cylinders. The reference model is used for calculating the decoupled synchronous error and control input for the each cylinder. The position controller of I-PD type is designed in order that the cylinder may follow the reference signal without overshoot and input saturation. And the synchronous controller of lead compensator is designed to achieve stable and accurate synchronization through loop shaping approach. Finally, the simulation results show that the synchronization between the four cylinders can be quickly and stably while each cylinder rod is transferred to the target point under torque disturbance.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.15 no.3
• /
• pp.487-494
• /
• 2020

In this paper, we propose a current memory circuit design that reduces static power consumption and maximizes the advantages of current mode signal processing. The proposed current memory circuit minimizes the problem in which the current transfer error increases as the data transfer time increases due to clock-feedthrough and charge-injection of the existing current memory circuit. The proposed circuit is designed to insert a support MOS capacitor that maximizes the Miller effect in the current transfer structure capable of low-power operation. As a result, it shows the improved current transfer error according to the memory time. From the experimental results of the chip, manufactured with MagnaChip / SK Hynix 0.35 process, it was verified that the current transfer error, according to the memory time, reduced to 5% or less.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.13 no.2
• /
• pp.349-356
• /
• 2018

In this study, the synchronous control system is designed to restrain the speed difference generated between two propellers, namely, synchronous error in a dual electric propulsion system of unmanned surface vehicle, fish finder boat, etc. The control system based on coupling structure is composed of pre-filters and speed controllers for each propulsion system and a synchronous controller cross-coupled between two propulsion systems. The pre-filter and speed controller are designed in order that the propulsion system may follow the speed reference without overshoot and input saturation. And the synchronous controller is designed in consideration of damping and quickness of the synchronous controller system after analyzing effect of the skew disturbance and mismatched dynamic characteristics on synchronous error. Finally, the simulation results show that the designed control system is effective for elimination of synchronous error.

• Journal of Advanced Navigation Technology
• /
• v.23 no.6
• /
• pp.561-569
• /
• 2019

Solar photovoltaic can provide electrical energy with only radiation, and its use is expanding rapidly as a new energy source. This study predicts the short and long-term PV power generation using actual converter output data of photovoltaic system. The prediction algorithm uses multiple linear regression, support vector machine (SVM), and deep learning such as deep neural network (DNN) and long short-term memory (LSTM). In addition, three models are used according to the input and output structure of the weather element. Long-term forecasts are made monthly, seasonally and annually, and short-term forecasts are made for 7 days. As a result, the deep learning network is better in prediction accuracy than multiple linear regression and SVM. In addition, LSTM, which is a better model for time series prediction than DNN, is somewhat superior in terms of prediction accuracy. The experiment results according to the input and output structure appear Model 2 has less error than Model 1, and Model 3 has less error than Model 2.