• 한국소음진동공학회논문집
• /
• 제18권1호
• /
• pp.26-34
• /
• 2008

This paper summarizes a design procedure of radiated noise from engine blocks of marine engines. This air-borne noise is one of the significant noise contributors including the aeroacoustic noise due to intake and exhaust and the re-radiation due to structure-borne noise. Excitation forces by engine operations are evaluated taking into account the power generation mechanism from the burning process to the subsequence motion of internal parts; piston, connecting rod, and crank shaft. The acoustic transfer vector method is incorporated to effectively simulate the radiated noise field under the various operation conditions. A contribution analysis for the various excitations to the radiated noise is conducted. It is found that the firing pressure is the main source of the radiated noise, and so the structure of the cylinder can be modified to significantly reduce the radiated noise from the engine block.

• 한국소음진동공학회논문집
• /
• 제24권9호
• /
• pp.695-705
• /
• 2014

In this paper, two types of techniques for the prediction of radiated sound pressure due to vibration of a structure are investigated. The prediction performance using wave-number sensing technique is compared to that of conventional prediction method, such as Rayleigh's integral method, for the prediction of far-field radiated sound pressure. For a coupled plate, wave-number components are predicted by the vibration response of plate and the prediction performance of far-field sound is verified. In addition, the applicability of distributed sensors that are not allowable to Rayleigh's integral method is considered and these can replace point sensors. Experimental implementation verified the prediction accuracy of far-field sound radiation by the wave-number sensing technique. Prediction results from the technique are as good as those of Rayleigh's integral method and with distributed sensors, more reduced computation time is expected. To predict the radiated sound by the efficient configuration of structural sensors, composed(synthesized) mode considering sound power contribution is determined and from this size and location of sensors are chosen. Four types of sensor configuration are suggested, simulated and compared.

• 한국소음진동공학회논문집
• /
• 제12권9호
• /
• pp.694-701
• /
• 2002

In this paper, through the study on locations of structural transducers for active control of the radiated sound from the vibrating plate, the active structural acoustic control (ASAC) system is proposed. And, for the evaluation of the proposed location, the experiment of the active structural acoustic control is implemented using the multi-channel filtered-x LMS algorithm and an additional filter (Acoustic Prediction Filter) to estimate the radiated sound using the acceleration signals of the plate. The structural transducers are piezoceramic actuator (PZT) and accelerometer. PZT is used as an actuator to reduce the vibration and the radiated sound. To maximize the control performance, each PZT actuator is located at the position that has the largest control sensitivity of the plate bending moment in the direction of x and y coordinates and the optimal PZT location is validated experimentally. Also, to find the acoustic prediction filter accurately, two accelerometers are located at the positions that have the largest radiation efficiencies of the plate, and the proposed locations are validated by simulation using the Rayleigh integral. The multi-channel filtered-x LMS algorithm is introduced to control a complex 2-D structural vibration mode. Finding the locations of structural transducers for active structural acoustic control of the radiated sound, the active structural acoustic control (ASAC) system can be presented and validated by experiments using a real time control system.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1995년도 추계학술대회논문집; 한국종합전시장, 24 Nov. 1995
• /
• pp.56-61
• /
• 1995

많은 공학자들은 기계 재료의 종류 및 형태에 따른 정적, 동적 특성 연구를 수행해 왔다. 특히 산업적으로 그 활용도가 높은 평판 재료에 대한 진동 특성 연구는 많이 이루어졌다. 최근에는 진동 특성을 해석하는 방법도 부분구조합성법, 감도해석법 등의 방법으로 연구가 활발히 이루어지고 있다. 한편 평판의 진동이 공기와 같은 매질로 상호 작용을 하며, 막힘이 없는 공간으로 음향을 방사하는 현상에 대한 연구도 이루어지고 있다. 그러나 평판 재료를 사용하여 기계 구조물을 제작하는 경우 많은 경우에 구조물간 결합에 의해 폐공간이 형성되고 이러한 폐공간에 의해 평판의 진동이 구조-음향 연성 현상이 발생되고, 이에 따라 평판의 진동 특성도 달라지게 된다. 이러한 구조-음향 연성에 대한 연구는 1978년 Wayne B.McDonald와 C.Kearney Barton, 1979년 R.Vaicatis에 의해 폐공간 내로의 음향 전달 현상을 연구하며 이루어졌다. 최근에 연구 동향은 이장명의 FEM과 BEM을 이용한 폐공간 내로의 음향 전달 현상을 연구하였고, V.B.Bokil에 의해 구조-음향 연성된 평판의 모드 해석 방법이 연구되었다. 한편 V.Martin에 의해 능동 소음 제어의 모델링을 좀더 정확히 하기 위해 구조 연성계를 고려한 연구도 수행되었다. 연구 결과 구조-음향 연성에 의한 평판의 고유진동수 변화를 구하였고 이 때에 경계조건을 만족하는 직교다항식을 이용한 Rayleigh-Ritz 방법을 이용하였다. 또한 이러한 해석은 실험과도 매우 잘 일치함을 알 수 있었다.

• 한국음향학회지
• /
• 제14권5호
• /
• pp.11-19
• /
• 1995

본 논문에서는 불규칙한 노면이 설치된 섀시 동력계(chassis dynamometer)로 부터 가진된 타이어의 구조 진동 소음을 음장의 공간적 변환기법을 이용하여 측정하였다. 음장의 공간적 변환기법은 소음원으로 부터 원거리까지의 전파를 계산하는 기법이다. 즉, 한평면의 음향 측정으로 부터 측정 평면에서 멀리 떨어지거나 더 가까운 평면에서의 음장을 표현하는 변수들인 음압, 음향 인텐시티, 입자속도 등을 계산한다. 측정 평면에서 음원쪽으로 가까운 평면의 계산은 관접음장 홀로그래피를 적용하여 계산하고 먼 쪽은 헬름흘쓰 적분식을 적용한다 측정결과로 부터 타이어 구조 진동 소음의 방사형태와 소음원의 위치를 예측하였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 추계학술대회논문집
• /
• pp.607-611
• /
• 2006

There are several methods to obtain structural vibration for analysis of vibro-acoustic noise. First of all, vibration data can be obtained through the structural analysis using finite element method. Although this method has no need to experiment, the analysis result is unreliable when the structure and the vibration source is complex to model exactly. The second method is to measure vibration using a number of sensors. The analyzed vibro-acoustic noise with directly measured data is setting morereliable when the number of data acquisition points is getting larger. However, it requires large amount of time and effort to measure all vibration data on every node especially when the size of vibrating structure is large. The Modal Expansion Method(MEM), which uses mode information and measurement data, has been introduced to compensate their limits. With a relatively small number of measurement data, the reliable structural vibration for vibro-acoustic noise can be obtained using this semi-analysis method. Although MEM gives reliable result, it is restricted by the number of modes and measurement points. In this paper, structural analysis, direct vibration measurement method and MEM are compared using the simple aluminum box model. Furthermore, the washing machine case is also provided as a comparative example. The Laser Doppler Vibrometer(LDV) was used instead of contact type accelerometer to get vibration data.

• 한국철도학회논문집
• /
• 제18권3호
• /
• pp.212-222
• /
• 2015

도심 내의 트램 노선 설계 및 건설에서 환경 소음 문제를 해결하기 위해서는 트램 시스템의 소음 방사특성을 파악하여야 한다. 본 논문에서는 트램 시험 차량에 대한 전동 소음 특성을 연구하였으며, 전동 소음 관점에서의 레일 지지 구조의 적절한 강성을 검토하였다. 매립형 궤도와 탄성차륜의 모빌리티를 Timoshenko 보 모델과 유한 요소 모델을 각각 이용하여 구하였고, 측정값과 비교하였다. 선로변 방출 소음도에 대한 계산값을 측정값과 비교한 결과 300Hz 이상의 주파수 대역에서 작은 오차를 내었다. 레일 및 슬라브 지지 강성을 변화시켜가면서 레일 및 차륜의 소음원 강도를 분석하였으며, 지반 진동을 과다하게 유발하지 않으면서 레일 및 차륜으로부터 방사되는 소음이 감소될 수 있는 적정 지지 강성을 검토하였다.

• 한국소음진동공학회논문집
• /
• 제18권9호
• /
• pp.972-981
• /
• 2008

The blower which is installed in a FCEV(fuel cell electric vehicle) may cause noise due to misalignment and unbalance of mechanical components that rotate at high speed. One of the key points in efforts to minimize the noise radiation from a blower is the knowledge of the main radiating component and the relation between the surface vibration of a blower and the sound pressure. In this research, the blower model is developed based on FEM(finite element method). FE(finite element) model is reliable by correlation of frequencies and MAC(modal assurance criterion) values between EMA(experimental modal analysis) and FEA(finite element analysis). This model is applied to predict the vibration of a blower by using inverse force identification method and predict the radiating noise by using BEM(boundary element method). Comparing the frequencies of resonance and those mode shapes between EMA and FEA, a structural modification of the FE model is evaluated for reducing the parameters of the blower noise.

• 한국소음진동공학회논문집
• /
• 제18권4호
• /
• pp.439-447
• /
• 2008

One of the key elements in efforts to minimize noise radiation from a powertrain is the knowledge of the main radiating component and the relation between the surface vibration of a powertrain and the sound pressure. In this research, the powertrain model is developed based on FEM(finite element method). This model is applied to the prediction of the vibration of a powertrain by using ADAMS and the radiation noise by using BEM(boundary element method). According to this numerical analysis, the surface vibration of a powertrain is investigated as a source of radiated noise. This surface vibration is caused by the 1st order natural vibration of the cylinder block and its mode shape is the torsion mode. Therefore, this mode shape is modified to reduce the surface vibration of the powertrain. The radiation noise of the modified powertrain is also reduced to $5{\sim}12\;dB$. This modification is very successful for the noise reduction based on the CAE technology.

• 한국소음진동공학회논문집
• /
• 제18권8호
• /
• pp.816-822
• /
• 2008

This study presents the design modification for SCR muffler of a commercial vehicle. Its main objective is the reduction of radiated noise at SCR muffler. For this study, the research of five steps were achieved by experimental and CAE analysis. First step is the measurement of radiated noise using impact-acoustic test. Second step is the source identification using experimental modal analysis. The cause of radiated noise source is confirmed by the resonance of end plates at SCR muffler. Third step confirms the possibility of resonance avoidance using SDM analysis applied the mass control. Fourth step is the suggestion of design modification which is the change of mode shape by CAE analysis. Last step is the verification of design modification using SYSNOISE analysis. Finally, the prototype product applied the countermeasure of resonance evasion was manufactured and the reduction of radiated noise at SCR muffler was confirmed by pass-by noise test.