• Elastomers and Composites
• /
• v.37 no.1
• /
• pp.39-48
• /
• 2002

Linear and crosslinked polyurethane dispersions were synthesized with 2,4-toluene diisocyanate, dimethylol propionic acid, polyoxypropylene glycol and polyoxypropylene glycerin. The structures of these polyurethanes were characterized by $^1H-NMR$ and FT-IR and the properties were measured with DSC, TGA, Instron and AFM etc. In case of linear polyurethane dispersion, the particle size, viscosity and glass transition temperature of polyurethanes increased with higher molecular weight of polyol and the degree of crosslinking. The crosslinked polyurethanes which contains more than 15% of polyoxypropyleneglycerin didn't from dispersion, when mixtures by polyoxypropyleneglycol and polyoxypropyleneglycerin were used as polyols. Thus, we synthesized crosslinked polyurethanes with 5%, 8%, 13% and 15% weight percents of polyoxypropylene glycerin as polyol mixtures.

• Elastomers and Composites
• /
• v.14 no.3
• /
• pp.161-168
• /
• 1979

이 논문(論文)의 목적(目的)은 열적안정성(熱的安定性) 및 내노화성면(耐老化性面)에 있어서 디엔제3성분단위체(第三成分單位體)(diene termonomer)의 각각(各各)의 종류(種類)가 EPDM의 중합체(重合體)의 성질(性質)에 미치는 효과(效果)를 구명(究明)하는데 있다. 제3성분단위체(第三成分單位體) 5종(種)으로 각각(各各) 다음과 같다. 즉, ethylidene norbonene(ENB), butadiene(BD), dicyclopentadiene(DCPD), methyltetrahydroindene (MTHI) 및 1,4-hexadiene(HD)이다. 이들을 써서 만든 각각(各各)의 EPDM은 동(同)몰의 불포화도(不飽和度)로 만들어졌다. 또한 가황계(加黃系)는 동일(同一)한 황/촉진제계(黃/促進劑系)를 사용(使用)하였다. ENB-EPDM이 순(純)고무배합체(配合體) 및 충전제함유배합체(充塡劑含有配合體)의 가황(加黃)에 있어서 모두 함께 가장 빠른 가황속도(加黃速度)를 보였다. HD-EPDM은 순(純)고무배합체(配合體)에서 가황속도(加黃速度)가 가장느렸으나 충전제함유배합물(充塡劑含有配合物)에서는 DCPD-EPDM보다는 발랐다. BD-EPDM을 제외(除外)한 이들 중합체(重合禮)는 거의 같은 초기가교밀도(初期架橋密度)를 갖는다. 가교밀도(架橋密度) 및 가교형(架橋型)을 분석(分析)하여 보면 BD-EPDM 쇄(鎖)에서 부타디엔 단위(單位)는 블럭을 이루고 있다. 또한 HD-EPDM은 순(純)고무가황체(加黃體) 및 충전제배합가황체(充塡劑配合加黃體)에 있어서 원가교결합(原架橋結合)의 50%가 monosulfide의 구조(構造)를 가지고있다. 이외(外)의 4종(四種)의 EPDM 폴리머는 보다 낮은 monosulfide구조를 가진다. $177^{\circ}C(350^{\circ}F)$의 노화온도(老化溫度)에서 ENB 및 HD폴리머는 약(約) 65% monosulfide 가교(架橋) 및 거의 동일(同一)한 파괴에너지값$(E_b)$을 가진다. 그러나 1,4HD의 원가교(原架橋)의 monosulfide 구조함량(含量)이 보다 높다고 해서 그의 내노화성(耐老化性)이 다른 폴리머보다 더 좋다고는 생각되지 않는다. DCPD는 $177^{\circ}C(350^{\circ}F)$의 노화온도(老化溫度)에서 똑같은 monosulfide가교(架橋)를 가지나 노화온도(老化溫度)가 $259^{\circ}C(500^{\circ}F)$로 높아짐에 따라 monosulfide 함량(含量)도 증가(增加)한다. $550^{\circ}F(287.7^{\circ}C)$의 노화온도(老化溫度)에서는 EPDM폴리머의 모든 가교(架橋)가 monosulfide구조가 되나 전가교밀도(全架橋密度) 및 $E_b$ (신장률(伸長率), 절단시(切斷時)의)는 대단(大端)히 낮은 것으로 나타나는데 이것은 산화(酸化)에 의한 노화(劣化)에 기인(基因)되는 것으로 보인다. 질소기류(窒素氣流)속에서의 TGA의 분석결과(分析結果)를 보면 EPDM 가황체(加黃體)는 $800\sim935^{\circ}F(427\sim502^{\circ}C)$의 온도범위(溫度範圍)에서 분해(分解)되며 공기중(空氣中)에서는 $750\sim935^{\circ}F$ 범위(範圍)에서 분해(分解)한다.

• Polymer(Korea)
• /
• v.27 no.3
• /
• pp.249-254
• /
• 2003

The variation of chemical structure and physical properties of crosslinked polyethylene (XLPE) during thermal aging process was investigated. The formation of carbonyl functional group resulting from thermal oxidation reaction of XLPE was monitored using X-ray photoelectron spectroscopy and near infrared (NIR) spectroscopy. It was observed that the intensity of carbonyl peak observed at 1715 nm linearly increased with aging time in NIR spectroscopy. The linear relationship between NIR peak absorbance and aging time confirmed that NIR spectroscopy might be used as a proper tool for monitoring the aging process of polymeric materials. Also the formation of crosslinks during the aging process was monitored using thermal mechanical analysis, stress-strain test, and Shore hardness test. The change in the physical properties, such as the increase in the glass transition temperature from 110 to 132$^{\circ}C$, the decrease in the strain from 265 to 110%, as well as the increase in the shore D hardness from 32 to 50, was observed during the aging process.

• Polymer(Korea)
• /
• v.33 no.6
• /
• pp.569-574
• /
• 2009

Organic- inorganic hybrid waterborne polyurethane (PUD) is synthesized by using hybrid polyol consist of carbonate (PCD), ester (PCL), and siloxane (PDSBP) in order to enhance anti-scratch property of PUD film. The diameter of graft type PUD emulsion is bigger than that of linear type PUD due to the graft structure of hydrophobic siloxane chain. The glass transition temperature of linear type PUD increase and the decomposition temperature of linear type PUD decrease with the content of PCD polyol. While, the decomposition temperature of graft type PUD almost same with increasing PDSBP content. The anti-scratch property and pencil hardness of graft type PUD improves as adding PDSBP polyol in the hybrid polyol system. When 9 wt% of PDSBP polyol is mixed, PUD films shows excellent anti-scratch property (~3.3 N), and pencil hardness (> 9 H).

• Polymer(Korea)
• /
• v.36 no.1
• /
• pp.9-15
• /
• 2012

We prepared a series of aromatic liquid crystals (LCs) based on wholly aromatic ester units with the reactive end group methyl maleimide by means of melt condensation method, and the resulting LCs were thermally crosslinked to produce liquid crystalline thermoset (LCT) films. The synthesized LCs and LCTs were characterized with Fourier transform infrared (FTIR) spectroscopy, wide angle X-ray diffraction (WAXD), differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), thermomechanical analysis (TMA), and polarizing optical microscopy (POM) with a hot stage. The glass transition temperature ($T_g$) and coefficient of thermal expansion are strongly affected by the mesogen units in their main chain structures. The $p$-substituted biphenyl LC was found to have the highest thermal property value.

• Applied Chemistry for Engineering
• /
• v.3 no.1
• /
• pp.130-137
• /
• 1992

The Graft copolymerization of acrylonitrile(AN) and styrene(ST) onto chloroprene rubber(CR) were carried out with benzoyl peroxide(BPO) as an initiator. The synthesized graft copolymer(ACS) was separated from polymeric mixture by the extraction with ethyl acetate and n-hexane, acetone and methanol, dimethylformamide(DMF) and methanol mixed solvent systems. The graft copolymer obtained, acrylonitrile-chloroprene-styrene(ACS) was identified by IR spectrophotometer. The effect of mole ratio of styrene to acrylonitrile, reaction time and temperature, initiator concentration, CR content and solvents on graft copolymerization were examined. It was observed that the grafting efficiency increased with [ST]/[AN] mole ratio and reaction time. The grafting efficiency increased with increasing initiator concentration and CR content. The maximum grafting efficiency was obtained when the mole ratio of [ST]/[AN] was 1.5 and reaction was made at 40hrs, and $70^{\circ}C$ using chloroform/toluene mixed solvent. The thermal properties, light resistance and flammability of ACS were compared with those of ABS and AES. It was found that flame retardancy of related polymers increased in the order ACS>ABS>AES. The thermal stability of ACS was greatly improved when compared with ABS or AES. Morphology of ACS was also investigated by using a transmisson electron microscope(TEM).

• Polymer(Korea)
• /
• v.25 no.6
• /
• pp.759-764
• /
• 2001

In order to obtain PEO with reduced crystallinity, novel PEO derivatives containing carbonate linkages in the main chain have been synthesized by the reaction of various molecular weight poly (ethylene glycol)s (PEGs) with dimethyl carbonate (DMC) in the presence of $H_2SO_4$ to yield methyl carbonate terminated PEGs, followed by condensation reaction under vacuum in the presence of titanium isopropoxide (TiP) catalyst. The number average molecular weight of PEGs used was in the range of 200 and 600 g/mol. The structure and compositions of the resulting polymers were characterized by $^1$H-NMR and $^{13}C-NMR$. Their thermal behavior and molecular weight were characterized by DSC/TGA and GPC, respectively.

• Journal of the Korean Chemical Society
• /
• v.33 no.4
• /
• pp.357-365
• /
• 1989

The positional parameters of framework atoms, cations, and water molecules in hydrated and dehydrated $Mg_4Na_4-A$, $Ca_6-A$, $Zn_5Na_2-A$ and $Co_4Na_4-A$ were determined by the optimization technique using some potential energy functions and VAIOA optimization program. Upon dehydration, cations in hydrated states move toward the framework oxygens of 6 rings. Frameworks of fully dehydrated zeolite A are more stable than those of fully dehydrated divalent cation exchanged Zeolite A. There are three different kinds of water molecules in divalent cation exchanged Zeolite A; W(III) (water molecules having hydrogen bonds), W(II) (water molecules associated with $Na^+$ ions), and W(I) (water molecules associated with divalent cations). Three different DTA endothermic peaks were observed corresponding to the dehydration of three different kinds of water molecules in divalent cation exchanged Zeolite A.

• Journal of the Korean Chemical Society
• /
• v.53 no.1
• /
• pp.17-26
• /
• 2009

Hydrazones of isonicotinic acid hydrazide, viz., N-isonicotinamido-furfuralaldimine (INH-FFL), N-isonicotnamido-cinnamalidine (INH-CIN) and N-isonicotnamido-3',4',5'-trimethoxybenzaldimine (INH-TMB) were prepared by reacting isonicotinic acid hydrazide with respective aromatic aldehydes, i.e., furfural, cinnamaldehyde or 3,4,5-trimethoxy-benzaldehyde. A new series of fifteen complexes of cobalt(II) with these new hydrazones, INH-FFL, INH-CIN and INH-TMB, were synthesized by their reaction with cobalt(II) salts. The infrared spectral data reveal that hydrazone ligands behave as a bidentate ligand with N, O donor sequence towards the $Co^{2+}$ ion. The complexes were characterized on the basis of elemental analysis, magnetic susceptibility, conductivity, infrared and electronic spectral measurements. Analytical data reveal that the complexes have general composition [Co($L)_2X_2]\;and\;[Co(L)_3](ClO_4)_2$ where L= INH-FFL, INH-CIN or INH-TMB and X = $Cl^-,{NO_3}-,\;NCS^-\;or\;CH_3COO^-.$ The thermal behaviour of the complexes were studied using thermogravimetrictechnique. Electronic spectral results and magnetic susceptibility measurements are consistent with the adoption of a six-coordinate geometry for the cobalt(II) chelates. The antimicrobial properties of cobalt(II) complexes and few standard drugs have revealed that the complexes have very moderate antibacterial activities.

• Journal of the Korean Chemical Society
• /
• v.42 no.3
• /
• pp.315-322
• /
• 1998

A series of new dimesogenic compounds were prepared and their thermotropic and liquid crystalline properties were studied by differential scanning calorimetry and on a hot-stage of a polarizing microscope. These compounds, 1,10-bis[2,5-bis(4-substitutedphenoxycarbonyl)phenoxy]decanes, consist of two bis(ρ-substitutedphenoxy)terephthalate units interconnected through a oxydecamethyleneoxy spacer on the central terephthaloyl units resulting in the structure of "H-shaped" dimeric twin compounds. The terminal substitutent groups were changed; X=-F, -H, -I, -Cl, -Br, $-NO_2,\;-CF_3,\;-OC_4H_9,\;-CN\;and\;-C_6H_5.$ The compounds with X=$-OC_4H_9,\;-CN\;and\;-C_6H_5$ were monotropically nematic. In contrast, the compounds with $X=-F, -H, -I, -Cl, -Br, $-NO_2\;and\;-CF_3$ were non-liquid crystals. The nematic group efficiency of these compounds was in the order of -C_6H_5>-CN>-OC_4H_9.$