• Journal of the Korea Organic Resources Recycling Association
• /
• v.32 no.1
• /
• pp.21-29
• /
• 2024

In this study, EMC(Epoxy molding compound) waste from the semiconductor molding process is recycled and synthesized into silica nanoparticles, which are then applied as abrasive materials contains CMP(Chemical mechanical polishing) slurry. Specifically, silanol precursor is extracted from EMC waste according to the ultra-sonication method, which provides heat and energy, using ammonia solution as an etchant. By employing as-extracted silanol via a facile sol-gel process, uniform silica nanoparticles(e-SiO₂, experimentally synthesized SiO₂) with a size of ca. 100nm are successfully synthesized. Through physical and chemical analysis, it was confirmed that e-SiO₂ has similar properties compared to commercially available SiO₂(c-SiO₂, commercially SiO₂). For practical CMP applications, CMP slurry is prepared using e-SiO₂ as an abrasive and tested by polishing a semiconductor chip. As a result, the scratches that are roughly on the surface of the chip are successfully removed and turned into a smooth surface. Hence, the results present a recycling method of EMC waste into silica nanoparticles and the application to high-quality CMP slurry for the polishing process in semiconductor packaging.

• Korean Journal of Optics and Photonics
• /
• v.35 no.4
• /
• pp.175-183
• /
• 2024

Research into optical signal processing using photonic integrated circuits (PICs) has been actively pursued in various fields, including optical communication, optical sensors, and quantum optics. Among the materials used in PIC fabrication, polymers have attracted significant interest due to their unique characteristics. To fabricate polymer-based PICs, establishing an accurate manufacturing process for the cross-sectional structure of an optical waveguide is crucial. For stable device performance and high yield in mass production, a process with high reproducibility and a wide tolerance for variation is necessary. This study proposes an efficient method for fabricating polymer optical-waveguide devices by introducing the atomic layer deposition (ALD) process. Compared to conventional photoresist or metal-film deposition methods, the ALD process enables more precise fabrication of the optical waveguide's core structure. Polyimide optical waveguides with a core size of 1.8 × 1.6 ㎛² are fabricated using the ALD process, and their propagation losses are measured. Additionally, a multimode interference (MMI) optical-waveguide power-splitter device is fabricated and characterized. Throughout the fabrication, no cracking issues are observed in the etching-mask layer, the vertical profiles of the waveguide patterns are excellent, and the propagation loss is below 1.5 dB/cm. These results confirm that the ALD process is a suitable method for the mass production of high-quality polymer photonic devices.

• Journal of Christian Education in Korea
• /
• v.76
• /
• pp.119-147
• /
• 2023

Purpose of study: The purpose of this study is to propose an education for biblical Shalom for the future of education in relation to UNESCO 2050. Research content and method: The education for Shalom is about experiencing Shalom in fellowship with God. Moreover, it expands that shalom into relationships with self, neighbors, the earth, and technology, and then helps achieving balance between Shalom and those mentioned above. In order to provide education for Shalom, this study presented five relational dimensions of experiencing Shalom. First, the joy of serving God and neighbors in a proper personal relationship with God is most important. Second, it is the joy of building a right community and living in it through harmonious relationships with neighbors. Third, it is the joy of living in a harmonious relationship with nature. Fourth, it is the joy of being respected for human rights that are dignified as the image of God and living while enjoying rights. Fifth, it is the joy of enjoying fair use and benefits from technological innovation without being alienated, excluded and treated unfairly, or receiving disadvantages. Based on that, a model of education for Shalom has been developed. Conclusions and Suggestions: The educational model for Shalom forms view of values, knowledge, and human nature through the Bible. It consists of learning strategies to maintain a balance between the form of knowledge and the five relational dimensions. This model has a structure that carries out education for Shalom while interacting with each other.

• Journal of the Korean Electrochemical Society
• /
• v.27 no.3
• /
• pp.88-96
• /
• 2024

Lithium metal has garnered attention as a promising anode active material thanks to its high specific capacity, energy density, and the lowest reduction potential. However, the formation of dendrites, dendritic crystals that arise during the charge and discharge process, has posed safety and lifetime stability challenges. To resolve this, our study has introduced a novel separator design. This separator features a composite coating of vapor-grown carbon fiber, a conductive material in nanofibers, and silver. We have meticulously studied the impact of this innovative separator on the electrochemical properties of the lithium metal anode, unveiling promising results. To confirm the synergistic effect of VGCF and Ag, a separator with no surface treatment and a separator with only VGCF coated on one side were prepared and compared with the Ag-VGCF-separator. In the case of the bare separator, the Li metal surface is covered with dendrites during the initial charge and discharge process. In contrast, both the VGCF-separator and the Ag-VGCF-separator show Li precipitation inside the conductive coating layer coated on the separator surface. Additionally, the Ag-VGCF-separator showed a more uniform precipitate shape than the VGCF-separator. As a result, the Ag-VGCF-separators show improved electrochemical properties compared to the bare separators and the VGCF-separators.

• Journal of Korea Society of Industrial Information Systems
• /
• v.29 no.4
• /
• pp.1-11
• /
• 2024

Bridges crack and become damaged due to age and external factors such as earthquakes, lack of maintenance, and weather conditions. With the number of aging bridge on the rise, lack of maintenance can lead to a decrease in safety, resulting in structural defects and collapse. To prevent these problems and reduce maintenance costs, a system that can monitor the condition of bridge and respond quickly is needed. To this end, existing research has proposed artificial intelligence model that use sensor data to identify the location and extent of cracks. However, existing research does not use data from actual bridge to determine the performance of the model, but rather creates the shape of the bridge through simulation to acquire data and use it for training, which does not reflect the actual bridge environment. In this paper, we propose a bridge safety determination edge AI model that detects bridge abnormalities based on artificial intelligence by utilizing acceleration data from bridge occurring in the field. To this end, we newly defined filtering rules for extracting valid data from acceleration data and constructed a model to apply them. We also evaluated the performance of the proposed bridge safety determination edge AI model based on data collected in the field. The results showed that the F1-Score was up to 0.9565, confirming that it is possible to determine safety using data from real bridge, and that rules that generate similar data patterns to real impact data perform better.

• The Journal of the Convergence on Culture Technology
• /
• v.10 no.5
• /
• pp.453-458
• /
• 2024

If you are unable to get comfortable sleep to maintain and recover your health, it will cause a lot of disruption to your daily life. Among the intraoral devices used to resolve snoring, obstructive sleep apnea, bruxism, teeth clenching, and mouth breathing, which interfere with a comfortable sleep, devices that stabilize the lower jaw by moving it forward are a treatment that replaces surgical therapy and positive airway pressure. It is showing effect. During use of the device, a force is generated that causes the lower jaw to return to its original position, so a device that fixes it with screws, rubber bands, etc. is used. To see the effect of the device, you must bite your upper and lower teeth. In order to eliminate the inconvenience of having to stay closed while sleeping, the device is manufactured only in the upper jaw and creates a vertical guideway in the lingual embarasure of the lower jaw in the shape of a key & key way structure, allowing twisting movements and allowing forward and lateral movements. It is about the development of a device that has a blocking function that allows the mouth to be opened while wearing the device and has a function that solves sleep apnea by inducing airway expansion during sleep.

• Korea journal of population studies
• /
• v.19 no.2
• /
• pp.77-105
• /
• 1996

The rural problems which we are facing start from the extremely small sized population and the skewed population structure by age and sex. Thus we analyzed the change of the rural population. And we analyzed the recent return migration to the rural areas by comparing the recent in-migrants with out-migrants to rural areas. And by analyzing the rural village survey data which was to show the current characteristics of rural population, we found out the effects of the in-migrants to the rural areas and predicted the futures of rural villages by characteristics. The changes of rural population composition by age was very clear. As the out-migrants towards cities carried on, the population composition of young children aged 0~4 years was low and the aged became thick. The proportion of the population aged 0~4 years was 45.1% of the total population in 1970 and dropped down to 20.4% in 1995, which is predicted to become under 20% from now on. In the same period(1970~1995), the population aged 65 years and over rose from 4.2% to 11.9%. In 1960, before industrialization, the proportion of the population aged 0~4 years in rural areas was higher than that of cities. As the rural young population continuously moves to cities it became lower than that in urban areas from 1975 and the gap grew till 1990. But the proportion of rural population aged 0~4 years in 1995 became 6.2% and the gap reduced. We can say this is the change of the characteristics of in-migrants and out-migrants in the rural areas. Also considering the composition of the population by age group moving from urban to rural area in the late 1980s, 51.8% of the total migrants concentrates upon age group of 20~34 years and these people's educational level was higher than that of out-migrants to urban areas. This fact predicted the changes of the rural population, and the results will turn out as a change in the rural society. However, after comparing the population structure between the pure rural village of Boeun-gun and suburban village of Paju-gun which was agriculture centered village but recently changed rapidly, the recent change of the rural population structure which the in-migrants to rural areas becomes younger is just a phenomenon in the suburban rural areas, not the change of the total rural areas in general. From the characteristics of the population structure of rural village from the field survey on these villages, we can see that in the pure rural villages without any effects from cities the regidents are highly aged, while industrialization and urbanization are making a progress in suburban villages. Therefore, the recent partial change of the rural population structure and the change of characteristics of the in-migrants toward rural areas is effecting and being effected by the population change of areas like suburban rural villages. Although there are return migrants to rural areas to change their jobs into agriculture, this is too minor to appear as a statistic effect.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.25 no.1
• /
• pp.48-57
• /
• 2015

In a sodium-cooled fast reactor, which is a Generation-IV reactor, refueling is conducted by rotating, but not opening, the reactor head to prevent a reaction between the sodium, water and air. Therefore, an inspection technique that checks for the presence of any obstacles between the reactor core and the upper internal structure, which could disturb the rotation of the reactor head, is essential prior to the refueling of a sodium-cooled fast reactor. To this end, an ultrasound-based inspection technique should be employed because the opacity of the sodium prevents conventional optical inspection techniques from being applied to the monitoring of obstacles. In this study, a ranging inspection technique using a plate-type ultrasonic waveguide sensor was developed to monitor the presence of any obstacles between the reactor core and the upper internal structure in the opaque sodium. Because the waveguide sensor installs an ultrasonic transducer in a relatively cold region and transmits the ultrasonic waves into the hot radioactive liquid sodium through a long waveguide, it offers better reliability and is less susceptible to thermal or radiation damage. A 10 m horizontal beam waveguide sensor capable of radiating an ultrasonic wave horizontally was developed, and beam profile measurements and basic experiments were carried out to investigate the characteristics of the developed sensor. The beam width and propagation distance of the ultrasonic wave radiated from the sensor were assessed based on the experimental results. Finally, a feasibility test using cylindrical targets (corresponding to the shape of possible obstacles) was also conducted to evaluate the applicability of the developed ranging inspection technique to actual applications.

• Progress in Medical Physics
• /
• v.20 no.2
• /
• pp.80-87
• /
• 2009

Phase transformation, superelastic characteristics and variation of surface residual stress were studied for Nitinol shape memory alloy through application of UNSM technology, and life extension methods of stent were also studied by using elastic resilience and corrosion resistance. Nitinol wire of ${\phi}1.778$ mm showed similar surface roughness before and after UNSM treatment, but drawing traces and micro defects were all removed by UNSM treatment. It also changed the surface residual stress from tensile to compressive values, and XRD result showed less intensive austenite peak and clear martensite and additional R-phase peaks after UNSM treatment. Fatigue resistance could be greatly improved through removal of surface defects and rearrangement of surface residual stress from tensile to compressive state, and development of surface modification system to improve not only bio-compatability but also resistance to corrosion and wear will make it possible to develop vascular stent which can be used for circulating system diseases which run first cause of death of recent Koreans.

• Science of Emotion and Sensibility
• /
• v.21 no.2
• /
• pp.101-112
• /
• 2018

This study was carried out to enhance the competitiveness of blackbox design for domestic and international companies, based on the explosive growth of the blackbox market due to development of blackbox design for vehicle accident prevention and post-treatment. In the past, the blackbox market has produced products indiscriminately to meet the ever-increasing demand of consumers. Therefore, we thought a new design method was necessary to effectively investigate the needs of rapidly changing consumers. In this study, we aimed to identify the best-selling blackbox to understand the design flow, and the optimum area for a blackbox, considering the uniqueness of associated vehicle. Based on discussion with blackbox design experts, we studied the direction of design and the problems with blackbox use, which were reflected in blackbox development. Through this research, two types of design - leading blackbox (A type) and mass production blackbox (B type) - were proposed for compatibility of the blackbox with the car. The leading type of blackbox was positioned so that it was wrapped with the room mirror hinge before the screw was fastened, in order to achieve an integrated design. Therefore, we designed an integrated form and resolved the placement problem of an adhesive blackbox. To blend, the mass production blackbox implemented material and surface processing in the same way with the car, and adopted the slide structure to automatically turn off the main body power when removing the SDcard, reflecting consumer needs. This study considers evolving consumer needs through a case study and collective intelligence and deals with implementation of the whole design process during mass production. In this study, we aimed to strengthen the competitiveness of the blackbox design based on design method and its realization.