• Journal of Korea Foundry Society
• /
• v.44 no.4
• /
• pp.97-102
• /
• 2024

In this study, the properties of Zr-14Cu-7.5Ni-2.6Al wide ribbon with amorphous structure and properties were analyzed using Hall effect, SEM-EDX, and XRD. Made by melt spinning method, this Zr-14Cu-7.5Ni-2.6Al based alloy ribbon is not more than 96 ㎛ thick and 100 mm wide. This amorphous alloy exhibited tensile strength of 1,641 MPa, yield strength of 1,541 MPa, elongation of 1% and elastic modulus of 98GPa. The bulk concentration, resistivity, and mobility values are midway between general heavy doping ceramics and metals, and they are about 100 times weaker than ordinary metals, so they are close to Si and have good electrical conductivity. In addition, folding tests were conducted at extreme temperatures, withstanding 150,000 times at -20℃, 300,000 times at 24℃, and 150,000 times at 60℃, with no folding defects observed. These results demonstrate the excellent durability and reliability of the Zr-14Cu-7.5Ni-2.6Al wide ribbon alloy and suggest the possibility of developing electronic products using this alloy.

• Journal of Korean Society of Environmental Engineers
• /
• v.29 no.7
• /
• pp.820-825
• /
• 2007

Earthworm casting was the natural fertilizer that contained high concentrations of nutrients such as nitrogen, phosphate and potassium and of over $10^8$ CFU/ml of microorganisms. Greater than 80% of feed was excreted through the fermentation by the intestinal enzyme, after worm had eaten feeds such as fallen leaves and rotten roots under the ground. Also, the soil structure of casting was known to be very efficient in the aspects of the porosity, the water permeability, and deodorizing activities. In this research, the biofilter packed with a biomedia made of casting and waste polyurethane foam, a binder, which helped to improve the durability and perpetuity of casting, was investigated to degrade malodorous hydrogen sulfide gas. The biomedia had no need of extra supply of nutrients and of microbial inoculations. On the beginning of the operations, it showed 100% removal of hydrogen sulfide gas without lag phase. At SV of 50 $h^{-1}$, hydrogen sulfide gas from the outlet of the biofilter was not detected, when inlet concentration increased to 450 ppmv. After that, removal efficiency decreased as increasing inlet hydrogen sulfide concentration. Hydrogen sulfide removal was maintained at almost 93% until inlet concentration was increased up to 950 ppmv, at which the elimination capacity of $H_2S$ was 61.2 g $S{\cdot}m^{-3}{\cdot}h^{-1}$. Maximum elimination capacity guaranteing 90% removal was 61.2, 65.9, 84.7, 89.4 g $S{\cdot}m^{-3}{\cdot}h^{-1}$ at SV ranging from 50 $h^{-1}$ to 300 $h^{-1}$, but was 59.3 g $S{\cdot}m^{-3}{\cdot}h^{-1}$ at SV of 400 $h^{-1}$. The results calculated from Michaelis-Menten equation revealed that $V_m$ increased from 66.04, 88.96, 117.35, 224.15, to 227.54 g $S{\cdot}m^{-3}{\cdot}h^{-1}$ with increasing space velocity in the range of 50 $h^{-1}$ to 400 $h^{-1}$. However, saturation constant$(K_s)$ decreased from 79.97 ppmv to 64.95 and 65.37 ppmv, and then increased to 127.72 and 157.43 ppmv.

• Journal of Biosystems Engineering
• /
• v.21 no.4
• /
• pp.414-421
• /
• 1996

한국과 일본의 경우 건표고를 외관의 품질상태 에 따라 12등급에서 16등급으로 구분하고 있다. 그리고 등급판정 작업은 임의로 추출한 샘플을 대상으로 전문 감정가에 의해 수작업으로 수행되고 있다. 건표고의 품질을 결정짓는 외관의 품질인자들은 갓과 내피에 고루 분포하고 있다. 본 논문에서는 컴퓨터 영상처리 시스템에 의거하여 개발한 건표고 자동 등급판정 및 선별 시작시스템의 구조와 기능 그리고 성능에 대하여 설명하였다. 개발한 시작시스템은 표고의 이송과 취급자동화를 위한 진동이송기, 반전장치, 컨베이어 이송장치와 두 세트의 컴퓨터 영상처리 시스템, 그리고 시스템 통괄제어를 위한 IBM PC AT호환 컴퓨터, 디지털 입출력 보드, 전공압실린더 구동제어를 위한 PLC등으로 구성하였다. 등급판정의 효율성 및 실시간 작업시스템을 고려하여 건표고의 등급판정은 두 세트의 컴퓨터 영상처리 시스템을 이용하여 이송되는 건표고의 갓 또는 내피 중 어디가 위를 향하는 지에 따라 두 단계에 걸쳐 독립적으로 판정을 수행하도록 하였다. 첫 번째 영상처리부에서는 갓표면 영상으로부터 4등급의 고품질 표고를 분류하며 두 번째 영상처리부에서는 내피표면 영상으로부터 중간 및 저품질 표고를 8개의 등급으로 분류한다. 실시간 영상정보처리를 목적으로 기존에 개발한 신경회로망을 이용한 등급판정 알고리즘을 시작시스템에 적용하였다. 개발한 시작기는 88% 이상의 등급판정 정확도를 보여 주었으며, 전공압시스템의 구동제약으로 인하여 표고 1개당 약0.7초의 선별시간이 소요되었다. 일조 선별라인의 경우 본 연구에서 제안한 시작기의 선별능력은 표고가 일차 처리부로 갓이 위로 올라와 있는 상태로 계속 공급된다면 시간당 대략 5,000여 개의 표고를 처리할 수 있을 것으로 기대된다.보강하여 가능하면 B-Pillar의 Middle이 Bending type collapse을 방지하여 Pelvis와 Door가 먼저 접촉하는 방법 등이 적용가능하다. 제작하기 이전에 설계된 부품에 대한 스프링 상수 및 내구특성을 체계적으로 규명하여 제품 시험의 횟수를 줄이고, 보다 정밀한 제품을 제작할 수 있도록 하기 위한 것이다.세포수는 초기 배반포기배에서 팽윤 배반포기배로 진행됨에 따라 두배에서 세배 정도 증가되었음을 알 수 있었다. 또한, differential labelling과 bisbenzimide기법에서 얻어진 각각의 총세포수를 비교하였을 때 총세포수는 발달의 진행 정도에 따라 증가되며 그와 동시에 동일한 군 간의 세포수도 거의 유사함을 알 수 있었다. 따라서, ICM과 TE를 differential labelling하는 기법은 수정란의 quality를 평가하는데 매우 유용한 기법으로서 착상전 embryo 발달을 연구하는데 효과적으로 이용될 수 있다는 것을 시사한다. 고도의 유의차를 나타낸 반면 비수구, 초생수로구 및 Bromegrass 목초구 간에는 아무런 유의차가 인정되지 않았다. 7. 농지보전 처리구인 배수구와 초생수로구는 비처리구에 비해 낮은 침두 유출량과 낮은 토양유실량을 나타내었다.구보다 14% 절감되는 것으로 나타났다.작용하는 것으로 사료된다.된다.정량 분석한 결과이다. 시편의 조성은 33.6 at% U, 66.4 at% O의 결과를 얻었다. 산화물 핵연료의 표면 관찰 및 정량 분석 시험시 시편 표면을 전도성 물질로 증착시키지 않고, Silver Paint 에 시편을 접착하는 방법으로도 만족한 시험 결과를 얻을 수 있었다.째, 회복기 중에 일어나는 입자들의 유입은 자기폭풍의 지속시간을 연장시키는 경향을 보이며 큰

• Journal of the Korea Concrete Institute
• /
• v.19 no.5
• /
• pp.613-621
• /
• 2007

Due to the increasing significance of durability, much researches on carbonation, one of the major deterioration phenomena are carried out. However, conventional researches based on fully hardened concrete are focused on prediction of carbonation depth and they sometimes cause errors. In contrast with steel members, behaviors in early-aged concrete such as porosity and hydrates (calcium hydroxide) are very important and may be changed under carbonation process. Because transportation of deteriorating factors is mainly dependent on porosity and saturation, it is desirable to consider these changes in behaviors in early-aged concrete under carbonation for reasonable analysis of durability in long term exposure or combined deterioration. As for porosity, unless the decrease in $CO_2$ diffusion due to change in porosity is considered, the results from the prediction is overestimated. The carbonation depth and characteristics of pore water are mainly determined by amount of calcium hydroxide, and bound chloride content in carbonated concrete is also affected. So Analysis based on test for hydration and porosity is recently carried out for evaluation of carbonation characteristics. In this study, changes in porosity and hydrate $(Ca(OH)_2)$ under carbonation process are performed through the tests. Mercury Intrusion Porosimetry (MIP) for changed porosity, Thermogravimetric Analysis (TGA) for amount of $(Ca(OH)_2)$ are carried out respectively and analysis technique for porosity and hydrates under carbonation is developed utilizing modeling for behavior in early-aged concrete such as multi component hydration heat model (MCHHM) and micro pore structure formation model (MPSFM). The results from developed technique is in reasonable agreement with experimental data, respectively and they are evaluated to be used for analysis of chloride behavior in carbonated concrete.

• Journal of the Korea Concrete Institute
• /
• v.15 no.2
• /
• pp.197-208
• /
• 2003

This paper is to determine the possibility of re-using waste concrete from Incheon city area. The strength test was conducted with five aggregate compounds which was replaced a natural aggregate with recycled aggregate. After checking the physical characteristics of recycled aggregate compounds, the mix design of recycled concrete was conducted. For the relatively comparison between natural and recycled compounds, while the unit aggregate weight was changed, other conditions were fixed. The freezing and thawing test which included fly-ash and super-plastezer were performed to check the durability and workability when recycling waste concrete. In the physical characteristics of recycled aggregate, it was found that the specific gravity of recycled coarse aggregate and recycled fine aggregate satisfied the first grade of recycle specification(KS), and all compounds of recycled aggregate also satisfied the second grade of absorption specification, Especially up to the 50% substitution of recycled aggregate is equal to or a bit lower than that of convention aggregate. In comparison with conventional concrete, the recycled concrete is lower than maximum by 7% in compressive strength decreasing rate after freezing-thawing test. From now, although most of recycled concrete was used to the building lot, subgrade, asphalt admixture, through the result. It was proved that possibility of re-using recycled aggregate as the substructure of bridge, retaining wall, tunnel lining and concrete structure which is not attacked the drying shrinkage severely.

• Journal of Chest Surgery
• /
• v.41 no.1
• /
• pp.12-24
• /
• 2008

Background: It is currently thought that tissue valve degeneration is related to an animal's immune response, which is mainly due to cell surface ${\alpha}$-Gal epitopes. Cell surface ${\alpha}$-Gal epitopes are known to be degraded by the enzyme called green coffee bean ${\alpha}$-Galactosidase. It is also well known that ${\alpha}$-Gal epitopes are immunologically stained by Griffonia Simplicifolia isolectin type B4. We know that many commercially available tissue valves are made of aortic valves and pericardial tissue of pig. So, we investigated whether ${\alpha}$-Gal epitopes of the aortic valve and pericardial tissue of a pig can be removed by green coffee bean ${\alpha}$-Galactosidase, and we did so by comparing immunologic staining of the tissues before and after the enzyme treatment. Material and method: After treating fresh porcine aortic valve and pericardial tissue with green coffee bean ${\alpha}$-Galactosidase at concentrations of 0.5 unit/mL, 1.0 unit/mL, 2.0 unit/mL, respectively, under the condition of pH 6.5, temperature. $4^{\circ}C$ and 24 hours of incubation, each sample was stained with Griffonia Simplicifolia isolectin type B4 immunpfluorescent labeling. We then examined whether the ${\alpha}$-Gal epitopes were reduced or abolished in each consecutive. concentration of green coffee bean ${\alpha}$-Galactosidase by comparing the degree of the Griffonia Simplicifolia isolectin B4 staining in each sample. Result: In the pig aortic valve tissue, a 1.0 unit/mL concentration of green coffee bean ${\alpha}$-Galactosidase at pH 6.5, $4^{\circ}C$ and reaction for 24 hours was enough for complete removal of ${\alpha}$-Gal epitopes from the cell sur face on the immunostaining with Griffonia Simplicifolia isolectin B4. On the other hand, more ${\alpha}$-Gal epitopes were present in the pig pericardial tissue on Griffonia Simplicifolia isolectin B4 staining before the enzyme treatment, and 1.0 unit/mL of galactosidase was not sufficient for complete removal of ${\alpha}$-Gal from the tissue. 2.0 units/mL of green coffee bean ${\alpha}$-Galactosidase was needed to completely remove the ${\alpha}$-Gal epitopes from the pericardial tissue on immunostaining. Conclusion: The ${\alpha}$-Gal epitopes of the pig's aortic valve and pericardial tissue were successfully stained with Griffonia Simplicifolia isolectin B4. We could remove nearly all the ${\alpha}$-Gal epitopes using green coffee bean ${\alpha}$-Galactosidase at the concentration of 1.0 unit/mL in the aortic valve. Of pig, and 2.0 unit/mL was need to nearly completely remove all the ${\alpha}$-Gal epitopes in the pericardial tissue of pig under the condition of pH 6.5, $4^{\circ}C$ and 24 hours of reaction time. In the near future, removal of ${\alpha}$-Gal epitapes in the pig's aortic valve and pericardial tissue will become a powerful tool for the improvement of the tissue valve durability. It needs to be determined if ${\alpha}$-galactosidase treated pig tissue is immune to human anti-Gal antibody or anit-Gal mooclonal antibodies.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.10
• /
• pp.1275-1282
• /
• 2012

Helicopter rotor systems are dynamically loaded structures with many composite components such as the main and the tail rotor blades. The fatigue properties of composite materials are extremely important to design durable and reliable helicopter rotor blades. The safe-life methodology has generally been used in the helicopter industry to substantiate dynamically loaded composite components. However, it cannot be used to evaluate the strength reducing effects of flaws and defects that may occur during manufacturing and operational usage. The damage tolerance methodology provides a proper means to overcome this shortcoming; however, it is difficult to economically apply it to every composite component. The flaw tolerant methodology is an equivalent option to the damage tolerance methodology for civil and military rotorcraft. In this study, the flaw tolerant safe-life evaluation is described and illustrated by means of successful application to substantiate the retirement time of composite rotor blades.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.35 no.6
• /
• pp.585-592
• /
• 2011

The enhancement of the cold-start capability of polymer electrolyte fuel cells is of great importance in terms of the durability and reliability of fuel-cell vehicles. In this study, vanadium oxide films deposited onto the flat surface of metallic bipolar plates were synthesized to investigate the feasibility of their use as an efficient self-heating source to expedite the temperature rise during startup at subzero temperatures. Samples were prepared through the dip-coating technique using the hydrolytic sol-gel route, and the chemical compositions and microstructures of the films were characterized by X-ray diffraction, X-ray photoelectron spectroscopy, and field-emission scanning electron microscopy. In addition, the electrical resistance hysteresis loop of the films was measured over a temperature range from -20 to $80^{\circ}C$ using a four-terminal technique. Experimentally, it was found that the thermal energy (Joule heating) resulting from self-heating of the films was sufficient to provide the substantial amount of energy required for thawing at subzero temperatures.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.9 no.5
• /
• pp.527-533
• /
• 1999

Hertzian indentation tests with spherical indenters in water were conducted to examine the contact fatigue in three dental ceramics, such as feldspathic porcelain, micaceous glass-ceramic (MGC) and glass-infiltrated alumina, which was used as dental restorations, and evaluated the effect of contact damage on strength. Initial damage was dependent of microstructure, showing cone cracks of brittle behavior in the feldspathic porcelain and deformation of quasi-plastic behavior in the MGC, with an intermediate case in the glass-infiltrated alumina. However, as increasing the number of cyclic loading (n=1~n =$10^6$)all materials showed an abrupt strength degradation, at which fracture was originated from damage in the contact fatigue. There were two strength degradation with increasing the number of cyclic loading in specific loads (200N, 500N, 1000N):first was from the cone cracks, and second was from the radial cracks created by cyclic loading. The radial cracks, once formed, led to rapid degradation in strength properties, Finally the material was failed at the high number of cyclic loading. Strength degradation with indentation load at fixed number of cyclic loading indicated that the feldspathic porcelain should be highly damage tolerant to the contact fatigue.

• Korean Journal of Agricultural Science
• /
• v.19 no.2
• /
• pp.201-237
• /
• 1992

본(本) 연구(硏究)는 1992년(年) 2월(月)부터 동년(同年) 8월(月)까지 한국(韓國)의 농어촌진흥공사(農漁村振興公社)(RDC)와 말레시아의 KTA기술용역단간(技術用役團間)의 기술제휴하(技術提携下)에 아세아개발은행(亞細亞開發銀行)의 기술협력기금(技術協力基金)에 의(依)한 말레지아북부(北部) Terengganu 농촌개발제(農村開發第)2단계사업(段階事業)의 타당성조사연구(妥當性調査硏究) 결과(結果) 중 말레시아정부(政府)의 경제정책방향(經濟政策方向), 농업개발(農業開發) 및 사업(事業)의 경제적(經濟的) 재무적(財務的) 타당성(妥當性)만을 발췌(拔萃)하여 본(本) 논문(論文)에 수록(收錄)하였다. 본(本) 농촌개발사업지구(農村開發事業地區)는 말레시아의 북동(北東)쪽에 위치(位置)하고 있는 Terengganu State의 Setiu-Besut양(兩) Distict가 포함(包含)되는데 경제적(經濟的)으로 가장 낙후(落後)된 지역(地域)으로 매년(每年) 행사(行事)처럼 찾아오는 홍수(洪水)때문에 농경지(農耕地)를 집약적(集約的)으로 경작(耕作)하지 못함으로써 지역농민(地域農民)들은 빈곤(貧困)에서 벗어나지 못하고 있고 침수기간중(浸水期間中)에는 지역(地域)의 경제활동(經濟活動)은 물론(勿論) 교통(交通)마저 불통(不通)되고 농촌하부구조(農村下部構造)의 손실(損失)은 물론(勿論) 사회경제적(社會經濟的)인 손실(損失)이 크며 Setiu River의 하구(河口)가 침전(沈澱)되어 어선(漁船)의 출입(出入)이 점점(漸漸) 곤란(困難)해지므로써 어민(漁民)들의 생계(生計)에도 위협(威脅)을 주는 지역(地域)이다. 따라서 본(本) 타당성(妥當性) 조사연구(調査硏究)의 근본적(根本的)인 목적(目的)은 농촌(農村)의 빈곤(貧困)을 타파(打破)하기 위하여 (1) 홍수(洪水)를 방지(防止)하고, 배수(排水) 및 관개개선(灌漑改善)을 하며, 하구(河口)를 개발(開發)하여 어민(漁民)들의 생산활동(生産活動)을 돕고 지역주민(地域住民) 및 농민(農民)들의 경제활동(經濟活動) 및 농업생산성(農業生産性)을 제고(提高)시키며 (2) 환경보호(環境保護) 및 관리(管理)를 통(通)하여 지역주민(地域住民)에게 쾌적(快適)한 농촌생활환경(農村生活環境)을 제공(提供)하고 생태계(生態系)의 변화(變化)를 방지(防止)하며 (3) 다각적(多角的)인 영농활동(榮農活動)을 통(通)하여 지역농민(地域農民)의 소득(所得)을 극대화(極大化) 할 수 있는 개발(開發)의 기본구상(基本構想)과 이에 대한 기술적(技術的) 경제적(經濟的) 타당성(妥當性)을 구명(究明)하는 것이다. 본(本) 사업지역(事業地域)의 총면적(總面積)은 9,500ha이며 이는 4,680ha의 기설지구(旣設地區)의 개보수관개사업(改補修灌漑事業)과 500ha의 과수단지(果樹團地), 200ha의 채소단지(菜蔬團地), 500ha의 옥수수단지(團地), 250ha의 엽연초생산단지(葉煙草生産團地), 2,760ha의 오일팜 및 고무나무단지에 소, 염소 및 양(洋)을 사육(飼育)하는 종합적(綜合的)인 농촌개발(農村開發)로서 농가(農家)의 농업소득제고(農業所得提高)에 큰 기여(寄與)를 하게 되며 Setiu강(江)의 유역(流域) 4,090ha에 대한 홍수경감대책(洪水輕減對策)으로 지역주민(地域住民)의 생활안정(生活安定) 및 교통(交通), 관광(觀光), 사회경제적(社會經濟的) 생산활동(生産活動)을 촉진(促進)하는 사업(事業)을 하게된다. 본(本) 사업(事業)의 공사기간(工事期間)은 1993년(年)부터 5개년간(個年間)이며 총사업비(總事業費)는 외화(外貨) 2천만불(千萬弗)을 포함(包含)하여 5천(千) 5백만불(百萬弗)로 추정(推定)되었다. 년간사업수익(年間事業收益)은 사업(事業)의 완전운영기간(完全運營期間)인 2003년(年)을 기준(基準)으로 할 때 15,541백만불(百萬弗)로 추정(推定)되었으며 사업(事業)의 내구기간(耐久期間)은 30년(年)으로서 2023년(年)까지 생산(生産)이 계속(繼續)될 것이다. 본(本) 사업(事業)의 전체재무수익율(全體財務收益率)은 22.49%이며 경제적(經濟的) 수익률(收益率)은 19.30%로 경제적(經濟的)인 타당성(妥當性)이 매우 높음을 알 수 있다. 모든 사업(事業)이 계획(計劃)대로 성공적(成功的)으로 추진(推進)될 경우 사업지역내(事業地域)의 몽리농가(蒙利農家) 4,000호(戶)가 큰 혜택(惠澤)을 보게되고 농촌(農村)의 빈곤수준(貧困水準)(Poverty Line)은 현재(現在)의 36%에서 18%수준(水準)으로 경감(輕減)될 것이 기대(期待)되고 있다.