• 정보보호뉴스
• /
• s.136
• /
• pp.30-33
• /
• 2009

본 기고는 기업에서 지난 6년 동안 정보보호 관련업무 실무책임자로서의 경험을 토대로 어떻게 하면 보다 더 효율적이고 안정적인 정보보호활동을 수행할 수 있을까 하는 관점에서 바람직한 CSO의 역할 모델을 정리해 본 글이다. 전혀 보안에 신경을 쓰지 않아도 보안사고가 발생하지 않으면 100점짜리 보안수준이 되는 것이고, 제아무리 보안교육과 점검을 실시하고 취약점을 개선하기 위한 다양한 보안투자를 시행하더라도 보안사고가 터지는 순간, 보안수준은 순식간에 빵점짜리로 전락한다. 때문에 필자는 종종 정보보호 책임자는 안전고리를 벗겨낸 폭탄을 가슴에 품고 언제 터질지 모르는 지뢰밭에 서있는 사람이라고 역설한 바 있다. 최근 급속한 IT기술의 발전과 극심한 개인주의 성향 등으로 그 어느 때보다 보안사고의 위험성과 피해규모가 크게 증대되고 있으며, 이에 따라 기업에서 정보보호 업무 수행부서의 역할과 책임범위 역시 과거와 달리 매우 광범위하게 확장되고 있는 실정이다. 특히 우리나라는 90년대 말 IMF 당시 구조조정의 여파로 중국을 비롯한 해외 경쟁회사로 국내 기술자들이 이직함으로써 핵심 산업기술의 유출이라는 피해를 경험한 바 있다. 그런데 최근 미국에서 시작된 세계경기의 위축으로 또 한 차례의 보안사고 위험성에 크게 노출되어 있는 상황이다. 각 국의 문화 및 산업의 다양성만큼이나 수많은 위험성이 산재하고 있는 현대 사회에서 바람직한 CSO가 되기 위한 몇 가지 착안사항들에 대하여 논해 보고자 한다.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.11 no.1
• /
• pp.95-102
• /
• 2007

It needs to Prevent damage as aging shotcrete itself exists as a dangerous component to comuting vehicles or infrastructure due to scaling, spaling, and loosening. However, it is hard to make an approach owing to a steep slope and high work, and there has been indicated a limit that it is difficult to grasp the internal condition of shotcrete on the surface. This study aimed to research internal defects that cannot be observed from the surface, by measuring a subtle thermal transfer on the shotcrete surface by using infrared thermography for overcoming such a technical limit. As a result of conducting an inspection through an analysis on measured data and fieldwork using an endoscope camera, it was impossible to accurately determine the wet part because of an excessive coating of shotcrete, yet, This study is proposed effictively extract a void part of the inside with non-destructive and non-touching method.

• Journal of Cadastre & Land InformatiX
• /
• v.49 no.2
• /
• pp.57-66
• /
• 2019

Recently, as a part of the production of spatial information by smart cities, three-dimensional reproduction of structures for reverse engineering has been attracting attention. In particular, terrestrial LiDAR is mainly used for 3D reproduction of structures, and 3D reproduction research by UAS has been actively conducted. However, both technologies produce blind spots due to the shooting angle. This study deals with vertical structures. 3D model implemented through SfM-based image analysis technology using UAS and reproducibility and effectiveness of 3D models by terrestrial LiDAR-based laser scanning are examined. In addition, two 3D models are merged and reviewed to complement the blind spot. For this purpose, UAS based image is acquired for artificial rock wall, VCP and check point are set through GNSS equipment and total station, and 3D model of structure is reproduced by using SfM based image analysis technology. In addition, Through 3D LiDAR scanning, the 3D point cloud of the structure was acquired, and the accuracy of reproduction and completeness of the 3D model based on the checkpoint were compared and reviewed with the UAS-based image analysis results. In particular, accuracy and realistic reproducibility were verified through a combination of point cloud constructed from UAS and terrestrial LiDAR. The results show that UAS - based image analysis is superior in accuracy and 3D model completeness and It is confirmed that accuracy improves with the combination of two methods. As a result of this study, it is expected that UAS and terrestrial LiDAR laser scanning combination can complement and reproduce precise three-dimensional model of vertical structure, so it can be effectively used for spatial information construction, safety diagnosis and maintenance management.

• Journal of Food Hygiene and Safety
• /
• v.22 no.1
• /
• pp.63-75
• /
• 2007

A survey on sanitary management at 98 food service institutions located in Jeollabuk-Do were conducted. Food service institutions included 13 hospitals, 38 schools, 40 enterprises, and 7 others. The sterilization in boiling water was used for disinfection of tableware, spoon and chopsticks, and dish towel. Cooking kit, refrigerator, chopping board, and knife were sterilized with disinfectant. Frequency of sanitary training program on employees was 56.1% for 1 time/month, 12.2% for 2-3 times/month, and 11.3% for 1 time/week. Preparing ratio of defrosting, warehouse and rest room, and washing and sterilization diary were 73.8, 60.5, and 54.5%, respectively. However, checking ratio of environments (9.5%), personal sanitation (10.8%), and sanitary training program diary(8.4%) were low. Major obstacle factors on the introduction of Hazard analysis critical control point (HACCP) system into food service institutions were lack of equipment and facilities (54.1%) and lack of understanding and data on HACCP system (17.3%). Therefore, in order to reduce the outbreak of food-borne diseases increasing frequency, we estimated that the introduction of sanitary management system and the conversion of dietician' perception on sanitary managements in food service institutions were needed.

• Journal of Conservation Science
• /
• v.23
• /
• pp.119-124
• /
• 2008

Have difficult controversial point to suppress fire effectively by geographical special quality that fire is transmitted and is during the mountain with the fast speed if our country's tradition Buddhist temple makes of most wood and most of construction structure of country importance tradition Buddhist temple are ignited once because combustibility is high as wood. By fire safety supervision improvement way of tradition Buddhist temple cultural heritage in this treatise law and systematic side, Side that is construction room robbers, disaster and prevention of disasters basis system construction and stream tube engine combination check, training courtesy call activity reinforcement present.

• Tunnel and Underground Space
• /
• v.17 no.5
• /
• pp.337-349
• /
• 2007

Yearly, it seems the fact that the numbers of tunnels with wide sections are on the rise as the length of tunnel and number of lanes continues increasing. According to these trends, well-schemed plans of design, construction and management related with tunnel safety has become to be crucial. It is a high possibility to be observed by the fact that the direct effects of casualties and property damages are caused by the situations of car collisions, bump to solid structures by careless driving and the outbreak on vehicles by mechanical fault. Therefore, in order to prevent these types of accidents, we would make issues md adopt appropriate mechanical and management plans of emergency exits and disaster prevention equipments inside of tunnel, based on up-to dated experiences and study of foreign cases, to structural design technology. The objectives of this study are to recognize related actual problems and suggest improvement plans.

• The Bulletin of The Korean Astronomical Society
• /
• v.37 no.2
• /
• pp.152.2-152.2
• /
• 2012

우주발사체 발사를 위해서는 발사대시스템 개발이 필수적이다. 발사대시스템은 기계설비와 추진제공급설비, 관제설비로 구성되며, 그 중 기계설비는 발사지지대(Launch Pad), 이렉터(Erector), 트랜스포터이렉터(Transport-Erector), 케이블마스트(Cable-mast), 자동체결장치(Auto-coupling Device) 총 다섯 부분으로 나눌 수 있다. 발사지지대는 발사 전까지 발사체를 지지하는 구조물로 발사체의 안전을 보장하고 공급배관 및 통신라인의 경로를 제공한다. 이렉터는 발사준비과정에서 수평으로 이송된 발사체를 2개의 대형 유압실린더를 사용하여 기립시키는 장비로 발사 취소 시 발사체를 수평으로 전환한다. 트랜스포터이렉터는 조립공간에서 조립을 마치고 최종점검이 완료된 발사체를 전용차량을 이용하여 발사대로 이동하고 발사체를 안전하게 잡아준다. 자동체결장치는 지상으로부터 발사체로 연결되는 추진제, 압축가스 등의 연결배관을 자동으로 연결/분리하는 장치이다. 케이블마스트는 우주발사체 상단부의 UCU-E(Umbilical Connectors Unit-Electrical)를 통해서 전기, 고압가스, 고온공기 등을 공급하기 위한 통로로 발사 전까지 발사체시스템과 지상장비와의 통신수단이다. 또한 발사체로 연결되는 라인들을 발사 시에 나오는 후류에 의한 충격으로부터 보호하고, UCU-E가 기계적으로 분리되도록 구성되어 있다. 본 논문은 기존에 적용된 케이블마스트에 대한 구성, 기능 및 운용절차에 관한 것으로, 현재 진행 중인 한국형발사체 개발을 위한 기초 자료조사로 활용하고자 한다.

• Annual Conference of KIPS
• /
• 2015.04a
• /
• pp.404-405
• /
• 2015

최근 IT기술과 인터넷의 발전으로 시간과 공간에 제한을 두지 않고 업무를 처리해야 하는 상황으로 업무환경이 급격히 변화되고 있다. 특히 기업에서는 외부 네트워크와 정보교환의 필요성이 증가되었고, 구성원들의 잦은 외근, 출장 등 사무실 밖에서 업무를 처리하는 비중이 높아져, 내부뿐만 아니라 외부와의 정보공유를 하는데 있어 안전한 네트워크 구조를 요구하고 있다. 외부에서 효율적이고 안전하게 내부시스템에 접속할 수 있게 사용되는 것이 VPN(가상사설망: Virtual Private Network)으로, 기관 및 기업에서 VPN을 지속적으로 도입하여 운영하고 있다. 하지만 VPN에 인증이 성공되면 다양한 업무시스템에 접근이 용이하기 때문에, 악의적인 사용자로부터 정보유출이 손쉽게 이루어질 수 있다. 따라서 본 연구에서는 사용되고 있는 VPN에 대해 관리가 잘 이루어지는지 확인하는 실태점검 리스트를 제시하고, VPN에 대한 정보유출방지 모니터링을 위해 VPN의 접속로그를 분석하여 정보유출 보안위협행위를 탐지할 수 있는 시나리오를 도출하고자 한다.

• Journal of the Korean Institute of Gas
• /
• v.22 no.6
• /
• pp.44-51
• /
• 2018

As the LNG storage tank is aged, if there is a crack in the outer wall concrete or corrosion of the reinforcing steel, there is a risk of a major accident such as collapse of the structure depending on the type and degree of damage. Since 2014, LNG storage tanks have undergone precise safety diagnosis and safety inspection has been carried out. The condition evaluation criteria for each component have been revised and applied in January 2016. The condition evaluation standard is to evaluate the status of storage tanks based on the appearance survey and material test results of LNG storage tanks and it is important for maintenance. In addition, the representative condition evaluation standard that shows the comprehensive state of each LNG storage tank is important in maintenance, but the related standard for LNG storage tank outer concrete is not available in Korea and abroad, and development of the condition evaluation standard is necessary. In this paper, we examined the structural characteristics of LNG storage tanks, analyzed the status of the condition evaluation criteria for each member, and developed a comprehensive status rating system by weighting the members. We used the AHP(Analytic Hierarchy Process) technique and developed a representative conditon evaluation criteria through surveys of professional organizations.

• Journal of the Korean Institute of Gas
• /
• v.23 no.5
• /
• pp.35-43
• /
• 2019

The safety of industrial valves, which are the core parts of plant facilities, are managed by manpower and there are difficulties because of side area for inspection and limited accessibility due to the nature of facilities. The industrial valves used in plant facilities cause problems such as interrupted production; a loss of life due to leak or explosion of poisonous material and flammable gases, and difficulty in locating accident positions in the event of leakage or failure. Therefore, safety management and control systems based on IoT technology are needed. This study is about the development of risk factor prediction technique among the safety management of industrial valves through IoT- based wireless communication and the development of actuator control system. We have developed IoT-based industrial valve safety management techniques to prevent accidents caused by main risk factors by conducting an analysis of the structural characteristics of valves and an analysis of the causes of main risk factors through review of failure data and literature and an analysis of accident scenarios.