• Journal of Food Hygiene and Safety
• /
• v.31 no.1
• /
• pp.42-50
• /
• 2016

The effects of freezing and thawing conditions on microbiological quality and microstructure change of inoculated (Listeria monocytogenes and Campylobacter jejuni) and non-inoculated chicken breasts were investigated. Chicken breasts were frozen with air blast freezing (-20, -70, and $-150^{\circ}C$), ethanol ($-70^{\circ}C$) and liquid nitrogen ($-196^{\circ}C$) immersion freezing. There were no significant differences on the populations of L. monocytogenes inoculated with chicken breasts under different freezing conditions. However, air blast freezing ($-20^{\circ}C$) resulted in significant reductions for total aerobic bacteria and C. jejuni compared to the control and other freezing treatments. The frozen samples were thawed with (hot or cold) air blast, water immersion, and high pressure thawing at $4^{\circ}C$ and $25^{\circ}C$. the populations of total aerobic bacteria, and yeast and mold in the frozen chicken breast increased by 5.78 and 4.05 log CFU/g after water immersion thawing ($25^{\circ}C$) treatment. After five freeze-thaw cycles, the populations of total aerobic bacteria, yeast and mold, and C. jejuni were reduced by 0.29~1.40 log cycles, while there were no significant differences (P > 0.05) in the populations of L. monocytogenes depending on the freeze-thaw cycles. In addition, the histological examination of chicken breasts showed an increase in spacing between the muscle fiber and torn muscle fiber bundles as the number of freeze-thaw cycles increased. These results indicate that freezing and thawing processes could affect in the levels of microbial contamination and the histological change of chicken breasts.

• The Journal of Korean Medicine
• /
• v.18 no.1
• /
• pp.480-498
• /
• 1997

This study was to investigate the protective and anticirrhotic effects of Mockhyangjokisan and Haewooljoweetang on the liver cirrhosis or fibrosis induced by prolonged bile duct ligation; a new experimental model for cirrhosis and the intraperitoneal injection of dimethylnitrosamine in the rat. The development of fibrosis or cirrhosis and its inhibition by the two prescriptions were examined by the chemical analysis of AST, ALT, and hydroxyproline. The results obtained were as follows. 1. The increase of serum asparate aminotransferase induced by bile duct ligation was inhibited by the administration of Mockhyangjokisan and Haewooljoweetang extract. 2. The increase of serum alanine aminotransferase induced by bile duct ligation was inhibited by the administration of Mockhyangjokisan and Haewooljoweetang extract. 3. The increased level of serum AST and AL T induced by the intraperitoneal injection of dimethylnitrosamine was inhibited by the administration of Mockhyangjokisan and Haewooljoweetang extract. 4. The increasing level of hydroxyproline volume in the damaged liver tissues in the rat was decreased by the oral administration of Mockhyangjokisan and Haewooljoweetang extract. But there were no significant differences in the inhibition rate between the two experimental groups.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.29 no.2
• /
• pp.146-158
• /
• 2002

The purpose of this study was to investigate the effects of Nd:YAG laser on mechanically exposed pulp of dog by the observation of pulpal inflammatory change and heal process including dentinal bridge, structural changes of fibroblasts of thr remaining vital pulp tissue. In experimental group 1, the exposed pulps were irradiated with Nd:YAG laser(3W, 30Hz, 0.2sec) for $2{\sim}3$ second followed by capped with aluminium tin foil. In group 2 and group 3, the exposed pulps were irradiated with Nd:YAG laser via contact(Group 2) and non-contact(Group 3) methods followed by capped with calciumhydroxide paste. The animal were sacrificed at the intervals of 3, 7, 14 and 30days for histologic evaluation. The results were as follows : 1. The dentinal bridges were formwd more fast and broadly in the experimental group 1 and 2 than other groups, but there were no histologic differences in the degree of their formation among control group, experimental group 1. 2. Odontoblastic activities at amputated pulp was increased in the experimental group 2, 3 than other group but there no histologic difference in the odontblastic activitiy among control group, experimental group 1. 3. The infalmmation was severe at the postoperative 1 week of all groups, but its condition subsideed with time elapsed. At the postoperative 3, 7 days, its condition in experimental group 2, 3 were less severe than in the group 1. 4. There were no histologic differences between the experimental group 2 and 3 according to the degree of dentin bridge formation.

• Food Science and Preservation
• /
• v.24 no.2
• /
• pp.168-180
• /
• 2017

This study was performed to determine the rapid thawing method for reducing the thawing time of frozen pork loins and to examine the effects of supercooling on the microbiological, physicochemical, and sensory qualities of fresh and frozen-thawed pork during storage at -1.5, 4, and $15^{\circ}C$. Forced-air thawing at $4^{\circ}C$ was the most time-consuming process, whereas radio frequency thawing time was the shortest by dielectric heating. The supercooling storage temperature was chosen to be $-1.5^{\circ}C$ because microstructural damages were not observed in the pork sample after cooling at $-1.5^{\circ}C$ for 24 h. Fresh or frozen-thawed pork loins stored at $-1.5^{\circ}C$ had lower drip loss and total volatile base nitrogen, thiobarbituric acid-reactive substance, and Hunter b* levels than loins stored at 4 and $15^{\circ}C$. In addition, the least degree of increase in preexisting microorganisms counts of the fresh or frozen-thawed pork loin samples was obtained during supercooled storage at $-1.5^{\circ}C$. Sensory quality results of fresh and frozen-thawed pork loin samples stored at $-1.5^{\circ}C$ showed higher scores than the samples stored at 4 and $15^{\circ}C$. These data indicate that supercooling at $-1.5^{\circ}C$ in the meat processing industry would be effective for maintaining the quality of pork meats without ice crystal nucleation and formation.

• Korean Journal of Optics and Photonics
• /
• v.27 no.1
• /
• pp.1-17
• /
• 2016

Over the past two decades, fiber-based lasers have made remarkable progress, now having reached power levels exceeding kilowatts and drawing a huge amount of attention from academy and industry as a replacement technology for bulk lasers. In this paper we review the significant factors that have led to the progress of fiber lasers, such as gain-fiber regimes based on ytterbium-doped silica, optical pumping schemes through the combination of laser diodes and double-clad fiber geometries, and tandem schemes for minimizing quantum defects. Furthermore, we discuss various power-limitation issues that are expected to incur with respect to the ultimate power scaling of fiber lasers, such as efficiency degradation, thermal hazard, and system-instability growth in fiber lasers, and various relevant methods to alleviate the aforementioned issues. This discussion includes fiber nonlinear effects, fiber damage, and modal-instability issues, which become more significant as the power level is scaled up. In addition, we also review beam-combining techniques, which are currently receiving a lot of attention as an alternative solution to the power-scaling limitation of high-power fiber lasers. In particular, we focus more on the discussion of the schematics of a spectral beam-combining system and their individual requirements. Finally, we discuss prospects for the future development of fiber laser technologies, for them to leap forward from where they are now, and to continue to advance in terms of their power scalability.

• Journal of Veterinary Clinics
• /
• v.18 no.3
• /
• pp.257-264
• /
• 2001

This study was performed to investigate the effects of chitosan-trimer (CT) on the prevention of postoperative adhesion formation in the rate model. All animals divided into PBS (control), 1% CT, 3% CT, and chitin treated group. The mean adhesion score in 1% CT group (1.03$\pm$0.63), 3% CT group (0.64$\pm$0.53) and chitin group (1.67$\pm$0.71) was found to be lower than that in control group (2.07$\pm$0.81). More favorable adhesion prevention was achieved in 3% CT group (0.64$\pm$0.53) in comparison with the control group, 1% CT group, and chitin group without any hemorrhagic complications. A statistically significant difference was observed in adhesion formation between control group and 3% CT group (p<0.001). In control group, 44 of 45 sites (97.7%) formed adhesions between the intestine defects. In contrast, 3% CT was effective in reducing the incidence of adhesion formation to 17 to 45 sites (62.2%) (p<0.05). The locations of adhesions were observed in serosa-serosa (60%), serosa-mesentery (13.3%), serosa-connective tissue of testis (10%), omentum-liver (10%), serosa-omentum (3.3%), serosa-cecum (3.3%), and serosa-incision (0%). On the results of histological analysis, grade of inflammation and fibrosis at the sites of postoperative peritoneal adhesion formation were not significantly different in all groups. But, 3% CT showed the lowest score of inflammation and fibrosis. In 3% CT group, the rate of increase of plasma fibrinogen was significantly lower compared with that in control group from pre-operation to 10 days later (p<0.05). There were no appreciable difference in the CBC, leukocyte differential counts and total protein concentrations among four groups. In conclusion, our data suggested that CT should be effective on reducing adhesion formation in experimental rat models. The results also showed that 3% CT does not adversely affect normal wound healing and healthy recovery after operation.

• Journal of the Microelectronics and Packaging Society
• /
• v.19 no.1
• /
• pp.61-66
• /
• 2012

Chemical Mechanical Planarization (CMP) is a polishing process used in the microelectronic fabrication industries to achieve a globally planar wafer surface for the manufacturing of integrated circuits. Pad conditioning plays an important role in the CMP process to maintain a material removal rate (MRR) and its uniformity. For metal CMP process, highly acidic slurry containing strong oxidizer is being used. It would affect the conditioner surface which normally made of metal such as Nickel and its alloy. If conditioner surface is corroded, diamonds on the conditioner surface would be fallen out from the surface. Because of this phenomenon, not only life time of conditioners is decreased, but also more scratches are generated. To protect the conditioners from corrosion, thin organic film deposition on the metal surface is suggested without requiring current conditioner manufacturing process. To prepare the anti-corrosion film on metal conditioner surface, vapor SAM (self-assembled monolayer) and FC (Fluorocarbon) -CVD (SRN-504, Sorona, Korea) films were prepared on both nickel and nickel alloy surfaces. Vapor SAM method was used for SAM deposition using both Dodecanethiol (DT) and Perfluoroctyltrichloro silane (FOTS). FC films were prepared in different thickness of 10 nm, 50 nm and 100 nm on conditioner surfaces. Electrochemical analysis such as potentiodynamic polarization and impedance, and contact angle measurements were carried out to evaluate the coating characteristics. Impedance data was analyzed by an electrical equivalent circuit model. The observed contact angle is higher than 90o after thin film deposition, which confirms that the coatings deposited on the surfaces are densely packed. The results of potentiodynamic polarization and the impedance show that modified surfaces have better performance than bare metal surfaces which could be applied to increase the life time and reliability of conditioner during W CMP.

• Tuberculosis and Respiratory Diseases
• /
• v.45 no.5
• /
• pp.984-991
• /
• 1998

Background: The 3p deletions has been shown to be the most frequent alteration in lung cancers, strongly suggesting the presence of at least one tumor suppressor gene in this chromosomal region. However, no solid candidate for the tumor suppressor gene(s) on 3p has as yet been identified. Recent attention has focused on a candidate 3p14.2 tumor suppressor gene, FHIT, which is located in a region that is homozygously deleted in multiple tumor cell lines and disrupted by the hereditary renal cell carcinoma t(3;8) chromosomal translocation breakpoint FHIT also spans FRA3B, the most common fragile sites in the human genome. In the present study, we have analyzed expression of the FHIT gene in lung cancer cell lines. Methods: RNA from 21 lung cancer cell lines (16 NSCLC, 5 SCLC) were extracted using standard procedures. Random-primed. first strand cDNAs were synthesized from total RNA and PCR amplication of coding exons 5 to 9 was performed. The RT-PCR products were electrophoresed in 1.5% ethidium bromide-stained agarose gels. Results: 12 of 21(57%) lung cancer cell lines exhibited absent or aberrant FHIT expression [7 of 16(44%) of non-small cell lung cancer and 5 of 5(100%) of small cell lung cancer cell lines]. Conclusion: The result shows that abnormal transcription of the FHIT gene is common in human lung cancer cell lines, especially in small cell lung cancer.

• The Journal of Korean Academy of Prosthodontics
• /
• v.49 no.2
• /
• pp.168-176
• /
• 2011

Purpose: This study aims at investigating the influence of various insertion torques on thermal changes of bone. A proper insertion torque is derived based on the thermal analysis with two different implant designs. Materials and methods: For implant materials, bovine scapula bone of 15 - 20 mm thickness was cut into 35 mm by 40 - 50 mm pieces. Of these, the pieces having 2 - 3 mm thickness cortical bone were used as samples. Then, the half of the sample was immersed in a bath of $36.5^{\circ}C$ and the other half was exposed to ambient temperature of $25^{\circ}C$, so that the inner and surface temperatures reached $36.5^{\circ}C$ and $28^{\circ}C$, respectively. Two types of implants ($4.5{\times}10\;mm$ Br${\aa}$nemark type, $4.8{\times}10\;mm$ Microthread type) were inserted into bovine scapula bone and the temperature was measured by a thermocouple at 0.2 mm from the measuring point. Finite element method (FEM) was used to analyze the thermal changes at contacting surface assuming that the sample is a cube of $4\;cm{\times}4\;cm{\times}2\;cm$ and a layer up to 2 mm from the top is cortical bone and below is a cancellous bone. Boundary conditions were set on the basis of the shape of cavity after implants. SolidWorks was used as a CAD program with the help of Abaqus 6.9-1. Results: In the in-vitro experiment, the Microhead type implant gives a higher maximum temperature than that of the Br${\aa}$nemark type, which is attributed to high frictional heat that is associated with the implant shape. In both types, an Eriksson threshold was observed at torques of 50 Ncm (Br${\aa}$nemark) and 35 Ncm (Microthread type), respectively. Based on these findings, the Microthread type implant is more affected by insertion torques. Conclusion: This study demonstrate that a proper choice of insertion torque is important when using a specific type of implant. In particular, for the Microthread type implant, possible bone damage may be expected as a result of frictional heat, which compensates for initial high success rate of fixation. Therefore, the insertion torque should be adjusted for each implant design. Furthermore, the operation skills should be carefully chosen for each implant type and insertion torque.

• Journal of Life Science
• /
• v.17 no.10
• /
• pp.1309-1314
• /
• 2007

Investigation on health conditions of Thai koi (Anabas testudineus) were carried out through clinical and histopathological observations from different farms of Mymensingh district for seven months during August 2006 to February 2007. Fish sampling and water quality parameters (temperature, dissolved oxygen and pH) were monitored on a monthly basis. Clinical examination of fishes was also carried out for any kind of abnormalities at monthly intervals. Samples of skin, muscle, gill, liver and kidney were observed by histological technique. Among the water quality parameters the values of water temperature, dissolved oxygen were found to be at unfavorable level for fish during the colder months in the farms. Clinically it was observed that fishes were more affected from December to January and almost normal in appearance during August to September and February. Different clinical symptoms like scale loss, dermal lesion, ulcer and loss of caudal fin were noticed in December and January. In histopathological study, structures of fish organs were normal from August to September. In the months of October and November, minor pathologies were found to be started. Marked pathological changes like necrosis, pyknosis, inflammation, hemorrhage, hypertrophy, hyperplasia, missing of primary and secondary gill lamellae were observed in the months of December and January. Whereas, in the month of February the pathological condition of fish gradually reduced. Again when considered individual fish farm, fishes of Reliance Aqua Farm were more affected than Sotota Matshya Hatchery. The study showed that severity of clinical and pathological changes were increased in December and January. During the period EUS and protozoan diseases were noticed in A. testudineus of the investigated farms.