• Journal of the Korea institute for structural maintenance and inspection
• /
• v.8 no.4
• /
• pp.239-246
• /
• 2004

The fixed ends beam is analyzed by the s d 0 f system with the rigid-plastic model. And the safety criteria of the fixed ends beam to the Impulsive loads are established with the peak-load ratio to the static collapse load and impulse ratio to the ideal impulse producing the critical displacement. It is shown that the impulse and the peak-load of the impulsive loads are the important factors for the damage of the structures. It is also shown that the damage curves with the peak-load and impulse ratio are useful method to estimate the damage of the structures due to the emphasis on the equivalent dynamic loads rather than the equivalent static loads in the process of deriving the curve.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.8 no.1
• /
• pp.157-164
• /
• 2004

The safety criteria for the simple beam with a rigid-plastic model under the impulsive loadings are established with the peak-load ratio to the static collapse load and impulse ratio to the ideal impulse producing the plastic hinge at the mid-span. It is shown that the impulse and peak-load of the impulsive loadings are the important factors for the damage of the structures. It is also shown that the damage curves with the peak-load and impulse ratio may be useful method to estimate the damage of the structures due to the emphasis on the equivalent dynamic loads rather than the equivalent static loads in the process of deriving the curve.

• Magazine of the Korea Concrete Institute
• /
• v.12 no.3
• /
• pp.78-84
• /
• 2000

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.31 no.6
• /
• pp.367-372
• /
• 2018

Defects in aging infrastructures such as pre-stressed concrete bridges and cable bridges can cause a collapse of the entire structure. Defects, however, are often located inside of the structures that they are not visible from the outside. For example, in PSC bridges, because reinforcement steels are encased by exterior covers, corrosion and void on the reinforcement steel cannot be detected with a visual inspection. Therefore, in this paper, a new non-destructive evaluation(NDE) method that can detect defects inside of structures is presented. The new method utilizes sending of electrical signals, a method often utilized in electrical engineering to detect any discontinuities on power cables. In order to confirm the applicability and accuracy of the method, some experiments were conducted in the laboratory. And to overcome the hardship of conducting experiments on real structures due to their enormous size, simualtions were conudcted using a commercial program, COMSOL. The results of the experiments were analyzed and compared to confirm the accuracy of the simualtions.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.285-285
• /
• 2015

댐 및 저수지 시설물은 노후화나 안전성 미확보로 인한 파손 또는 붕괴 발생 시 하류부에 막대한 인명과 재산피해 등 치명적인 결과를 초래하게 된다. 이러한 대형 안전사고를 예방하고자 시설물의 안전관리에 관한 특별법에서는 댐 시설물을 규모별로 1, 2종 시설물로 구분하고, 이에 대해 주기적으로 안전점검 및 정밀안전진단을 실시하도록 제도화하는 한편 진단 결과에 따라 보수 보강 등의 안전조치를 의무화하고 있다. 구조물 결함에 따른 보수 보강은 보수재료와 공법 선정시 공법의 적용성, 구조적 안전성, 경제성 등을 종합적으로 검토하여 결정하여야 한다. 손상 부위에 대한 보수 보강은 제한된 예산과 인력을 효율적으로 투자하기 위해 보수재료 및 공법의 선정 뿐만 아니라 보수 보강이 이루어져야 하는 부재에 대한 우선순위를 산정하는 것이 최우선적으로 선행되어야 한다. 안전점검 및 정밀안전진단 세부지침에서는 보수 보강 대책 마련 시안전점검 및 정밀안전진단 결과를 기초로 하여 적정 재료 및 공법을 선정하고, 보수 보강의 수준 및 우선순위를 결정하도록 명시되어 있다. 하지만 우선순위 결정에 대한 가이드라인이 부재하여 불필요한 시공과 비효율적인 예산 투입으로 인해 국가예산의 낭비되고 시설물의 안전까지 위협받게 되는 경우가 발생하고 있다. 따라서 본 연구에서는 시설물의 상태에 따른 적절한 보수 보강 필요성을 판단하고 보수 보강 수준 및 우선순위를 결정하기 위한 방법론을 개발하였다. 댐 시설물에 대한 안전점검 및 정밀안전진단의 종합평가는 평가대상 개별시설에 대하여 상태 평가 및 안전성 평가를 실시한 후 그 결과에 의해 산출된 상태평가지수와 안전성평가지수를 비교하여 평가단계별로 그 결과를 취합하여 종합평가를 실시하고 있다. 따라서 상태평가에 의해 산정된 종합평가 결과를 이용하여 개별 부재의 상태평가값 산정을 위해 하부 단계의 가중치 및 평가 지수 역산하고, 재산정된 가중치 및 평가지수를 이용하여 각 부재에 대한 보수 보강 우선순위를 산정하고자 하였다. 개발된 방법론은 점검 진단 책임기술자 및 시설물 관리주체 담당자가 댐 시설물의 개별부재에 대한 보수 보강 실시 여부를 판정할 수 있는 기준으로, 보수 보강에 대한 정책 결정시 경제성을 고려한 신뢰도 있는 기준으로 활용될 수 있을 것으로 기대된다.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.24 no.6
• /
• pp.161-170
• /
• 2020

In this study, develop the seismic acceleration measurement data conversion and signal processing algorithms for improve the operational efficiency of the seismic acceleration measurement system installed for public facilities. Through the analysis of the seismic acceleration time history data, the evaluation methods and criteria and evaluating the safety of buildings were proposed. The system was applied to the test bed building to verify its operation and usability. It is expected to be used as a decision making support data and determining the direction and priority of disaster response in the event of an earthquake.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.24 no.6
• /
• pp.197-205
• /
• 2020

In 2014, The Housing Act amended to allows vertical extension and increases the units of housing (or total floor area) to site. Currently, the feasibility of performing vertical extension is evaluated based on safety diagnosis provisions and manuals with 1st investigation stage on slope, uneven settlement, load-bearing capacity, and durability. However, a need for more reasonable evaluation criteria for the investigation is still required because there had not been any other case study on the diagnosis for the vertical extension, and the engineering basis on evaluation criteria were not suggested. Accordingly, this study is intended to suggest feasible evaluation criteria on the carbonation, chloride ion contents, corrosion of reinforcements, crack and surface deterioration of concrete for durability assessment by codes and standards of domestic and foreign countries. The results of this study are expected to be beneficial for establishing more reasonable durability evaluation criteria, and in turn, more reliable assessment protocol for vertical extension.

• Proceedings of the Korean Information Science Society Conference
• /
• 2010.06d
• /
• pp.388-392
• /
• 2010

지하 배관 구조물은 국가 주요 자원의 수송망을 책임지는 핵심적인 기능을 수행하는 시설물로써, 배관구조물의 노후화와 부식, 균열, 조인트 풀림 등의 손상으로 인한 누출사고 발생 시 막대한 사회 경제적 손실을 초래할 우려가 있다. 특히, 지중배관 및 노출배관 경우에는, 현장 작업상황이 지속적으로 변화하고 있는 상황에서 24시간 안전관리에 대한 감시체계가 미흡한 것이 현실이다. 고가의 센서설치 및 배관의 유지관리 비용 등의 문제를 극복하려는 센서개발 연구 및 센서로부터 취득된 계측데이터를 현장에서 분석하여 실시간으로 배관의 이상상태를 판정하여 원격으로 그 판정결과를 알려주는 유비쿼터스 원격감시기법에 대한 연구 및 기술개발이 요구된다. 본 논문에서는 USN 기술을 활용한 배관안전진단 기술을 소개하고 임피던스 기반의 자가 감지 기법을 활용한 다양한 구조의 배관에 대해 진단 연구를 수행 하였다.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.8 no.3
• /
• pp.263-270
• /
• 2004

The dynamic behavior of multi-layered stone masonry monuments, such as stone pagoda, are mainly influenced by contour condition of contacting surface of stones. These structures can be modeled as a multi-degrees of freedom system. In this case the mass of the system can be easily estimated, mean while the estimation of stiffness at junction is not simple. In this paper a method for estimating the spring constant at the contacting surface of stone is proposed. The proposed method utilizes the natural frequency of the system which can be obtained by eigenvalue analysis.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.25 no.3
• /
• pp.85-91
• /
• 2021

Type 1 and type 2 buildings must regularly conduct precise safety inspections and precise safety diagnosis for the safety and maintenance of facilities, and the safety grade of the building is determined according to the results of the implementation. In addition, the cycle of inspection and diagnosis is determined according to the safety grade of the building. In order to determine the safety grade of the building, a precise safety inspection conducts condition evaluation, and a precise safety diagnosis conducts condition evaluation and safety evaluation. Therefore, since the inspection and diagnosis cycle is determined according to the safety grade of the building, the condition evaluation and safety evaluation must be precise. However, in the case of member unit evaluation, which is the first step in evaluating the current condition, the evaluation grade is determined by using the representative value of the measurement result, and this may result in an error in the evaluation grade. To solve this problem, this study analyzed evaluation criteria for each evaluation item and presented evaluation criteria using inequalities to respond to measurement results and evaluation scores. In addition, we present a functional formula that can reflect performance scores for each evaluation item.