• Journal of the Korea institute for structural maintenance and inspection
• /
• v.19 no.3
• /
• pp.10-21
• /
• 2015

Structural health monitoring (SHM) is a technique to diagnose an accurate and reliable condition of civil infrastructure by collecting and analyzing responses from distributed sensors. In recent years, aging civil structures have been increasing and they require further developed SHM technology for development of sustainable society. Wireless smart sensor and network technology, which is one of the recently emerging SHM techniques, enables more effective and economic SHM system in comparison to the existing wired systems. Researchers continue on development of the capability and extension of wireless smart sensors, and implement performance validation in various in-laboratory and outdoor full-scale experiments. This paper presents a summary of recent (mostly after 2010) researches on smart sensors, focused on the newly developed hardware, software, and validation examples of the developed smart sensors.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2011.04a
• /
• pp.199-202
• /
• 2011

플로팅구조물은 열악한 해양환경상태에 있기 때문에 구조물응답에 대한 실시간 모니터링 기술을 적용하여 구조안전성을 확보해야 한다. 특히 기존의 전기 저항식 스트레인 게이지 단점을 극복한 광섬유 센서를 이용하여 실시간 모니터링 시스템 개발에 관한 연구가 필요하다. 본 논문에서는 플로팅구조물의 축소 모델에 광섬유 센서 중 하나인 FBG센서를 부착하고 실험용 수조에 설치하여 광학 스펙트럼 분석기를 통해 중심파장을 측정한 후 변형률을 계산하였다. 또한 유한요소 모델을 유한요소 해석 프로그램인 ABAQUS를 사용하여 모델링하고 유한요소 해석을 통해 변형률을 출력하고 실험결과와 해석 결과를 비교하여 광섬유 센서를 이용한 플로팅구조물의 실시간 모니터링을 위한 기초자료를 제공하고자 한다.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2011.04a
• /
• pp.32-35
• /
• 2011

전기역학적 임피던스(electromechanical impedance)를 이용한 구조물 건전성 모니터링(structural health monitoring; SHM) 기술은 구조물의 주요 부재에 압전센서를 부착하여 이로부터 획득한 임피던스 신호의 변화를 관찰함으로써 구조물의 국부적 상태를 실시간으로 진단하는 것이다. 임피던스는 손상뿐만 아니라 외부 온도에도 민감하게 반응하기 때문에 구조물 진단 결과에 상당한 오차를 유발할 수 있으므로 이에 대한 보상을 수행해야 한다. 따라서 본 논문에서는 온도변화가 임피던스 기반 진단 결과에 미치는 영향을 PZT 센서를 사용하여 실험적으로 연구하였다. 리액턴스(reactance)의 주성분 분석(Principal Component Analysis; PCA)을 통해 도출된 첫번째 주성분과 저항(resistance)으로부터 계산된 손상지수 사이의 관계를 분석함으로써, 온도변화에 의해 구별되지 않았던 손상을 보다 확연하게 구별 할 수 있음을 확인하였다.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2009.04a
• /
• pp.106-109
• /
• 2009

본 논문에서는 교량의 상태감시 테스트베드 구축을 위한 한-미 국제공동연구의 현황 및 활동 내용들을 논하였다. 이 국제공동연구는 최첨단 센서와 구조건전도 모니터링 방법의 유용성 및 통합화하는데 그 목적을 두고 있다. 테스트베드 구축을 위해 가속도계과 동적 FBG 센서, 압전 센서 등과 같은 스마트 센서를 사용하였으며, 무선 데이터수집 시스템이 도입되었다. 교량 모니터링 기법으로는 압전 센서 및 EM센서로부터 취합된 데이터를 이용하여 국부손상검색을 수행하였으며, 가속도계, 동적 FBG센서 및 이미지 프로세싱을 이용하여 진동기반 전역손상검색을 수행하였다. 테스트베드 교량으로는 PC박스 거더교, 강상자형교, 강판형교, 사장교의 4가지 형식의 교량이 사용되었다. 테스트베드 교량에 최신 이동통신 인터넷 연결기술을 이용하여 교량에 설치된 센서로부터 취합된 데이터와 모니터링 시스템으로부터 교량의 상태를 실시간 감시할 수 있는 네트워크 시스템을 구축하였다. 이러한 원거리 이동통신시스템을 통하여 구조물의 건전성 평가결과를 실시간으로 전송 및 분석할 수 있도록 하였다.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2011.04a
• /
• pp.307-310
• /
• 2011

본 연구에서는 항만 구조물의 구조건전성 모니터링을 위한 Imote2 센서 플랫폼 기반의 스마트 무선센서의 적용성을 평가하였다. 이를 위해 먼저, 고민감도 MEMS 가속도계를 탑재한 Imote2 센서 플랫폼 기반스마트 무선센서를 설계하였다. 둘째, 스마트 무선센서노드의 독자적인 구조 상태 모니터링을 위한 내장소프트웨어를 설계하였다. 마지막으로, 모형 케이슨 구조물의 진동실험을 통해 개발된 스마트 무선센서의 성능을 검증하였다.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.10 no.6 s.52
• /
• pp.57-65
• /
• 2006

This paper presents hybrid structural damage monitoring system which performs both global damage assessment of structure and damage detection of local structural joints. Hybrid damage monitoring system is composed of vibration-based technique and electro/mechanic impedance technique. Vibration-based technique detects global characteristic change ot structure using modal characteristic change of structure, and electro/mechanical impedance technique detects damage existence of local structural joints using impedance change of PZT sensor. For the verification of the proposed hybrid monitoring system, a series of damage scenarios are designed to loosened bolts situations of the structural joints, and acceleration response and impedance response signatures are measured. The proposed hybrid monitoring system is implemented to monitor global damage-state and local damages in structural joints.

• Tunnel and Underground Space
• /
• v.28 no.4
• /
• pp.293-303
• /
• 2018

Monitoring is the act of collecting and analyzing accurate engineering information using various methods and instruments. The purposes of the monitoring are design verification, construction management, quality control, safety management, and diagnose of structure etc.. The diagnose evaluation of the geotechnical structures corresponds to the confirmation of the structural performance. It is aimed to judge the soundness of geotechnical structures considering the degree of damage due to the environmental change and elapsed time. Recently, microseismicity, which is widely known in Korea, can be used for safety management and diagnoses of structure as it detects the micro-damage without disturbance of the structure. This report provides guideline on the procedure for assessing an underground oil storage cavern using microseismic monitoring techniques. Guidelines cover the selection of monitoring systems, sensor array, sensor installation and operation of systems, and interpretation.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.27 no.5
• /
• pp.67-74
• /
• 2023

A large number of concrete structures are built and used around the world. To ensure their safe and continuous use, these structures require constant inspection and maintenance. While man-powered inspection and maintenance techniques are efficient, they can only provide intermittent status checks at the time of on-site inspection. Therefore, there is a growing need for a system that can continuously monitor the condition of the structure. A study was conducted to detect cracks and damage by installing a conductive coating on the surface of a concrete structure. A parallel resistance pattern that can monitor the occurrence and progression of cracks was developed by reflecting the structural characteristics of concrete structure. An empirical study was conducted to veryfy the application of the proposed method. The crack detection pattern was installed on the reinforced concrete beams, and the crack monitoring method was verified through applying a load on the beams.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.9 no.8
• /
• pp.841-846
• /
• 2014

FBG sensors are mainly used to measure deformation of structures such as tunnels, bridges and ships. In this paper, an interrogator of FBG sensors is developed and implemented to measure the status of structures. A developed interrogator includes CAN wired and Zigbee wireless communication for remote monitoring. Strain of structure is measured using shift of wavelength of reflected light from FBG sensor. A digital signal controller is used to process signals of a FBG sensor and transmit data for remote monitoring. As a result of experiment, developed interrogator is effective to measure deformation of structures.

• Journal of Korean Society for Geospatial Information Science
• /
• v.11 no.2 s.25
• /
• pp.53-59
• /
• 2003

Many facilities have been constructed due to the rapid development of science and economy, and the tendency for larger sizes and higher stories in constructing are being accelerated due to the development of technologies, and the efficient use of limited spaces. The safety problems of constructions are being frequently brought up. So, a technique by which the monitoring of the safety of constructions can be easily done must be developed as soon as possible. In this research an management system for structure's displacement using satellite survey was studied. The results of having established the management system for structure's displacement as a GPS positioning system were that data acquisition was easier than that from using normal survey equipment, and data from the satellite survey can be applied to the database of management system. The data of the GPS suey were rather large values to determine the safety of single stories, but can probably be used in establishing the management system using the structure's displacement.