• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.4
• /
• pp.1611-1617
• /
• 2013

Information about trafficability or the condition of road with regard to its being traveled over by vehicles is one of the most critical factors for roadway operation in winter. Specifically, when traveling on snowy or icy surfaces, the traction force varies per vehicle type including tire types, geometric characteristics of roads, and conditions of road surfaces. In general, front-wheel drive or four-wheel drive vehicles have better traction performance on snowy or icy surface than rear-wheel drive vehicles, and the latter type vehicle causes more serious traffic congestion when there is unexpected snowfall. Thus, traffic information regarding trafficability with respect to vehicle types, geometric characteristics of roadway sections, and roadway surface conditions can provide a foundation to make a decision whether to use the associated roadway sections for roadway operators as well as users. Based on the preceding premise, the objective of this study is to present a methodology for developing a trafficability index with respect to vehicle types, geometric characteristics of roadway sections, and roadway surface conditions.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.1290-1291
• /
• 2011

본 연구에서는 배선용차단기의 트립부 동작 신뢰성 향상과 트립부의 구조 최적화를 위하여 트립부 동작 특성을 정량적으로 예측할 수 있는 자계-동역학 연성해석기술을 연구하였다. 먼저 전류와 트립부 가동자 변위에 따라 가동자에 유기되는 전자기력을 예측할 수 있는 수식을 도출하였으며, 전자기력 수식과 가동자의 회전운동방정식을 시간에 따라 과도해석하여 가동자의 변위와 동작전류, 트립하중을 정량적으로 예측할 수 있는 트립부 동특성 해석기술을 개발하였다. 그리고 개발된 해석기술을 검증하기 위하여 양산 배선용차단기를 이용하여 트립실험을 실시하였으며 동작전류의 실험값과 해석값이 비교적 일치함을 확인하였다. 또한 본 연구에서는 개발된 해석기술의 활용성을 제고하기 위하여 윈도우즈 환경의 트립부 동특성 해석 프로그램을 개발하였으며, 이를 활용하여 트립부 설계변수별 동작 특성을 분석하였다.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.17 no.5
• /
• pp.1084-1094
• /
• 1993

An efficient method for determining forced responses of a general linear structural system in time domain using subtructure modes and Lagrange multipliers is presented. Compared with the conventional mode synthesis methods, the suggested method does not construct the equations of motion of the combined whole structure and thus the modal parameters of the whole structure are not required. Only modal parameters of each substructure and geometric compatibility conditions are needed. Both the loaded interface free-free modes and free interface modes can be employed as the modal bases of each substructure. Recurrence discrete-time state equations based upon state transition matrix are formulated for the transient analysis of a parameter-changing system. It is shown form numerical examples that the suggested method is very accurate and efficient to calculate transient responses compares with the direct numerical integration method.

• The Journal of the Korea Contents Association
• /
• v.16 no.3
• /
• pp.11-21
• /
• 2016

Recently, structure safety management techniques using cutting-edge technology(Displacement senor, sensor of acceleration) has emerged as an important issue owing to the aging of infrastructure such as bridge and building. In general, the structural monitoring system for structure safety management is based on IT technology and it is expensive to install. In this paper developed an image-based structure dynamic characteristic analysis system prototype to assess the damage of structure in a more cost-effective way than traditional structure health monitoring system. The inspector can take a video of buildings or other structures with digital camera or any other devices that is passible to take video, and then using NCC calculation for image processing technique to get natural frequency. This system is analysis of damage of the structure using a compare between the frequency response ratio and functions when problems are occurs send alarm to administrator. This system is easier to install and remove than previous monitoring sensor in economical way.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2009.04a
• /
• pp.678-678
• /
• 2009

환경 소음,진동 개선의 측면에서 철도 레일 하부로 전달되는 진동 및 구조소음을 효과적으로 차단하기 위하여 국내에서도 탄성지지 구조의 플로팅 슬라브를 적용하는 경우가 증가하고 있다. 플로팅 슬라브 구조설계에 있어 주안점은 슬라브 자체 중량에 비하여 열차 중량과 열차 주행간에 발생하는 동하중이 2$\sim$3배 이상 높아 열차 주행 안정성을 고려해야 하는 점이며 열차의 고속화 경향에 따라 동하중의 증가는 더욱 커지고 있다. 특히, 열차의 구조 동특성과 동하중의 주파수 특성을 고려할 경우 슬라브 구조의 동적 설계변수(고유진동수, 감쇠비 등) 결정이 매우 제한되고 있음을 고려하면 탄성지지부의 감쇠 및 강성의 가변 특성의 부여는 매우 중요하다 할 수 있다. 본 연구에서는 MR 댐퍼와 MR 방진고무 등의 반능동 소재를 사용하여 열차 주행간에 발생하는 탄성지지 슬라브의 진동을 제어하는 시뮬레이션을 수행함으로써 적용 가능성을 확인하고자 한다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1994.10a
• /
• pp.58-61
• /
• 1994

본 연구에서는 내부 외부 진동원(8-30Hz)에 따른 격자보 구조의 동적 응답을 효과적으로 제어하기 위해 격자보 구조의 동적 거동에 지배적인 영향을 미치는 철근비, 질량, 탄성계수 등 여러 인자들의 비교, 분석을 통해 동적 거동에 영향을 미치는 인자를 분석함으로써 격자보 구조의 설계시 인자의 변화에 따른 동적 거동 특성을 예측하여 이에 적절히 대응할 수 있도록 도모하였다. 이를 위해 국내에 건설된 반도체 공장의 격자보 구조 중에서 기본 해석 모델을 결정하고 이에 대해 실험적 모드 해석과 유한 요소 해석을 사용해서 기본 해석 모델의 모드 매개변수를 구하고, 기본 해석 모델에 사용되는 각 인자가 고유 진동수에 미치는 영향을 비교.분석하였다.

• Journal of Energy Engineering
• /
• v.17 no.1
• /
• pp.23-30
• /
• 2008

The neutron kinetic analysis methods for the molten-salt reactors are quite different from those for conventional solid-fuel reactors, which do not take into account the flowing-fuel-induced neutronics effects. Therefore, for dynamics and safety analyses of the molten-salt reactor systems, the conventional kinetics codes would not be appropriate to accurately predict its transient behaviors. A point-kinetics with flowing- fuel model has been used to assess the fluid-fuel reactor system safety, but recognized as not to be sufficient to simulate spatial distributions of delayed-neutron precursors and neutron populations during transients for given detail reactor models. In order to meet this requirement, AMBIKIND, a 2-group, 2-dimensional neutron kinetics code suitable for the molten-salt reactor systems was developed. This paper explains the code's theoretical and numerical descriptions and, as a part of its verification, includes some simulation results of MSRE stability experiments. Even though the present reactor model does not include the recirculation effect of the fuel-salt through the reactor system, the AMBIKIN2D code should be able to predict the power and phase shift at various power levels and reactivity insertions with better accuracy.

• Aerospace Engineering and Technology
• /
• v.4 no.2
• /
• pp.15-20
• /
• 2005

Most of studies for the ground load and ground behavior of landing gear have been conducted with an assumption that the structure of landing gear was rigid body. The assumption of rigid body during design process results in many errors or discrepancy. High ground load occurs in 3 directions on the shock absorbing strut during landing. This ground load initiated high structural deformation. In this study, the flex-multi-body dynamics is applied to adapt flexible bodies, so the results of analysis can be described close to landing gears real behaviour.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.26 no.4
• /
• pp.20-29
• /
• 2022

The operational modal analysis (OMA) technique, which extracts the modal parameters of a structural system using ambient vibrations, has been actively developed as a field of structural health monitoring of cable-supported bridges. In this paper, the short and long-term modal parameters of a cable-stayed bridge were evaluated using the acceleration data obtained from the two ambient vibration tests (AVTs) and three years of continuous measurements. A total of 27 vertical modes and 1 lateral mode in the range 0.1 ~ 2.5 Hz were extracted from the high-resolution AVTs which were conducted in the 6th and 19th years after its completion. Existing OMA methods such as Peak-Picking (PP), Eigensystem Realization Algorithm with Data Correlation (ERADC), Frequency Domain Decomposition (FDD) and Time Domain Decomposition (TDD) were applied for modal parameters extraction, and it was confirmed that there was no significant difference between the applied methods. From the correlation analysis between long-term natural frequencies and environmental factors, it was confirmed that temperature change is the dominant factor influencing natural frequency fluctuations. It was revealed that the decreased natural frequencies of the bridge were not due to changes in structural performance and integrity, but to the environmental effects caused by the temperature difference between the two AVTs. In addition, when the TDD technique is applied, the accuracy of extracted mode shapes is improved by adding a proposed algorithm that normalizes the sequence so that the autocorrelations at zero lag equal 1.

• Proceedings of the KIEE Conference
• /
• 2008.04c
• /
• pp.71-73
• /
• 2008

본 논문에서는 편측식 선형 유도전동기의 2차측 도체의 구조에 따른 동특성 해석을 유한요소법을 사용하여 수행하였고 결과를 비교 분석하였다. 2차측 구조를 주로 사용되는 판 형태와 농형 그리고 이중농형의 구조로 나누어 해석을 수행하였으며 추력, 수직력, 추력리플, 수직력 리플, 주파수 및 슬립에 따른 특성 등을 비교 분석 하였다.