• Journal of the Korean Geographical Society
• /
• v.28 no.4
• /
• pp.321-355
• /
• 1993

This paper focuses on the geographical pattern of financial activities in the Korean urban system during 1975-1990, based on the assumption that financial activities can reveal control points in Korea's urban economy. In terms of spatial evolution of financial insitutions, different locational characteristics are revealed among different types of financial institutions, implying the role of urban hierarchy. Financial resources are highly concentrated in the capital region, Seoul and Kyonggi Province. Both centralization trends into the large metropolitan cities and relative declines of medium and small cities within the Korean urban system, have been experienced over the study period. Financial activities sustain relatively stable hierarchical structure in the urban hierarchy. Regarding the financial flows, dominant flow zones centered on major metropolitan cities are identified, clearly showing a prominant role of Seoul in financial flows in the entire urban system.

• Parasites, Hosts and Diseases
• /
• v.25 no.2
• /
• pp.168-180
• /
• 1987

This study was performed to observe histopathological changes and serological reactions in chronic anisakiasis of rabbits. Each rabbit was infected per os with 30 larvae of Anisakis type I. Their sera were collected chronologically and the rabbits were killed for histopathological examination, 3, 13, 20, 30, 60, 90 and 150 days after the infection. The results were summarized as below. 1. Most of the larvae were recovered from the stomach, but a few from the omentum, intestine, mesentery and abdominal wall. The recovery rates and distribution of worms by organ were not differed by duration of infection. 2. Histologically the lesion was abscess type on 13 days, i.e., the dead worms were surrounded by fibrinous exudate, histiocytes and thick zone of numerous inflammatory cells. After 30 days, histiocytes were found to invade the worms and the lesion was changing into abscessgranulomatous type. Also a calcified worm was found on the 30th day. After then the worms were observed to be dissolved slowly until 90 days. On 150 day, only one calcified worm was observed. 3. The levels of serum IgG antibody by ELISA reached their maximum 30 days after the infection. After then, it decreased slowly until 150 days after the infection. Above serological and histopathological findings indicated that antigenic stimulation from degenerating Anisakis larvae was the greatest during the first 30 days after infection. This period was corresponding with the beginning of worm resolution or calcification. Serologic test by ELISA would be a valuable tool for confirming chronic anisakiasis.

• Korean Journal of Food Science and Technology
• /
• v.30 no.4
• /
• pp.976-982
• /
• 1998

The effects of the glycoprotein (PAG) isolated from Pteridium aquilinum on the immune function was examined in mice. PAG was intraperitoneally administered into BALB/C mice for 14 days and the antibody forming ability to hen egg lysozyme (HEL) and the blastogenic responses of splenocytes were measured. PAG treatment significantly increased antibody formation to HEL in a dose-dependent manner. Blatogenesis of splenocytes in response to lipopolysaccharide (LPS, B-cell specific mitogen) or phytohemagglutinin (PHA, T-cell specific mitogen) was also increased after treatment with PAG, indicating that the PAG increases both humoral and cellular immunities. To examine whether the immune function of PAG was via a direct effect on the lymphocytes, splenocytes were isolated from BALB/C mice, exposed to various concentrations of PAG in vitro and the blastogenic responses were measured. In vitro exposure to PAG significantly increased blastogenesis of splenocytes to LPS up to $500{\;}{\mu}g/kg$, whereas the blastogenic response to PHA was not altered by PAG treatment. To identify the fraction responsible for the increase in the immune function, the effect of periodate digest, pronase digest or purified polysaccharide on the antibody production to HEL was examined. Crude protein fraction of PAG significantly increased the antibody formation to HEL. On the other hand, both crude and purified polysaccharide fractions did not have any effects on the antibody production ability. These data indicated that 1) PAG increased both humoral and cellular immune functions, 2) the increase in humoral immunity was probably via a direct action of PAG on lymphocytes and 3) the protein portion of PAG was responsible for the increase in humoral immunity.

• Journal of The Korean Ophthalmological Society
• /
• v.58 no.3
• /
• pp.321-326
• /
• 2017

Purpose To identify the correspondence between the central sensitivity of several visual field (VF) tests and ganglion cell inner plexiform layer (GC-IPL) thickness in early glaucoma patients with parafoveal scotoma. Methods Fifty-seven eyes from 57 patients with glaucomatous optic neuropathy and parafoveal scotoma were analyzed using the standard automated perimetry (SAP) C10-2 test, the SAP C24-2 test, and the frequency doubling technology perimetry (FDT) C24-2 test. The correlation between the VF central sensitivity and the GC-IPL thickness from macular scans via optical coherence tomography was analyzed. Results The central sensitivity was $27.51{\pm}5.43dB$, $27.39{\pm}5.05dB$, and $22.09{\pm}5.08dB$ for SAP C24-2, SAP C10-2, and FDT C24-2, respectively. Mean GC-IPL thickness was $70.2{\pm}8.5{\mu}m$. Using regression analysis, the value of log $R^2$ between the logarithmic central sensitivity and GC-IPL thickness was 0.498, and the linear $R^2$ between the antilogarithmic central sensitivity and GC-IPL thickness in SAP C10-2 was 0.486, and both were statistically significant (p < 0.05). This relationship was stronger in early glaucoma patients compared to late glaucoma patients using SAP C10-2. Conclusions The structure-function relationship between GC-IPL thickness and central sensitivity was better with SAP C10-2, especially in early glaucoma patients, compared to other VF modalities.

• Clean Technology
• /
• v.27 no.4
• /
• pp.359-366
• /
• 2021

Halloysite nanotubes (HNTs), the multiwalled clay mineral with the composition of Al₂Si₂O₅(OH)₄·nH₂O, have been highlighted as a low-cost adsorbent for the removal of dyes from wastewater. Although a powder of halloysite presents a high specific surface area, forming media are significantly considered due to sludge-clogging induced by the water-bound agglomeration. However, higher firing temperature to achieve the structural durability of the media and lower utilization rate due to longer penetration depth into the media act as hurdles to increase the dye-adsorption capacity. In this work, the retention of the adsorption capacity of halloysite was evaluated with methylene blue solution after the heat treatment at 750 ℃. In order to improve the utilization rate, tubular media were fabricated by extrusion. The images taken by transmission electron microscopy show that HNTs present excellent structural stability under heat treatment. The HNTs also provide superb capacity retention for MB adsorption (93%, 18.5 mg g^-1), while the diatomite and Magnesol^® XL show 22% (7.65 mg g^-1) and 6% (11.7 mg g^-1), respectively. Additionally, compositing with lignin enhances adsorption capacity, and the heat treatment under the hydrogen atmosphere accelerates the adsorption in the early stage. Compared to the rod-type, the tubular halloysite media rapidly increases methylene blue adsorption capacity.

• Korean Journal of Heritage: History & Science
• /
• v.54 no.4
• /
• pp.260-285
• /
• 2021

This article deals with the current status of investigation of the royal tombs of Baekje (Gongju Songsan-ri Tomb, Buyeo Neungsan-ri Tomb, Iksan Ssangneung) from the Japanese colonial period to the present. A review of the maintenance status is also conducted to see if the survey content was actually reflected in the restoration maintenance of the ruins. First, the structure scale and characteristics of the royal tombs of Baekje during the Woongjin and Sabi periods were identified by examining the survey content organized by period and feature. Through the recent re-excavation survey, it was confirmed that the results of the research during the Japanese colonial period were being verified. Next, before examining the maintenance status of the Baekje royal tombs, related content about maintenance of laws and regulations were extracted to establish the maintenance standards. It was confirmed that the most importance part of maintenance is 'maintenance of the original form' without compromising the authenticity of cultural properties. Based on these criteria, the maintenance status was reviewed. The main part of the burial tomb is located underground, so maintenance is mainly made around the tomb, which is the upper structure. However, most of the original burial mounds have been lost or damaged, so it is difficult to determine their original form. In fact, constant changes in the size and location of tombs from the Japanese colonial period to the present were confirmed in the Songsan-ri and Neungsan-ri tombs, meaning that the current maintenance status is problematic. On the other hand, in the case of Ssangneung, not only are the tombs relatively intact, but there are also few changes in the records, so it seems that maintenance was carried out that preserved the original form of the tombs. Therefore, the maintenance of tombs in the future should be based on 'maintaining the original form', but it is recommended that the 'education and utilization' plan be prepared after determining whether or not to restore the tomb and the degree of restoration.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.9 no.4
• /
• pp.537-544
• /
• 2021

In order to describe the fill-up stages of a near-surface disposal facility vault, a mock-up test is performed, and its behavior during the fil l -up stages is investigated. On an in-site concrete foundation with a l ength of 6600mm, a width of 6600mm and a thickness of 400mm, a reinforced concrete disposal vaul t is manufactured with 4 precast (PC) corner wal l s and 8 PC side wal l s. 36 wasted drums are pl aced on the 1st fl oor in 6 by 6, and then the empty space is fil l ed with grout fil l er. These processes are repeated up to the 5th floor, and the verticality and the joint gaps are measured for each fill-up stage. The verticality is measured using a level at 6 positions on each side wall (3 positions on the left and right sides, respectivel y), i.e. a total of 24 positions on the 4 side wal l s. The joint gaps are measured at 9 positions on each side wal l (3 positions on the left, center and right sides, respectively), I.e. a total 36 positions on the 4 side walls. To measure the joint gaps, crack tips are installed on the left and right sides of every joint gap, and vernier calipers are used. The measured verticality obtained through the mock-up test was found to be ±0.1° based on the initial stage (ST0), and the result of the joint gap was up to 0.38mm. This appears to have a negligible effect on the structure.

• The Korean Journal of Archival Studies
• /
• no.14
• /
• pp.153-190
• /
• 2006

Externally, business environment in public institution has being changed as government business reference model(BRM) appeared and business management systems for transparency of a policy decision process are introduced. After Records Automation System started its operation, dissatisfaction grows because of inadequacy in system function and the problems about authenticity of electronic records. With these backgrounds, National Archives and Records Service had carried out 'Information Strategy Planning for Reform to Records Management System' for 5 months from September, 2005. As result, this project reengineers current records management processes and presents the world-class system model. After Records and Archives Management Act was made, the records management in public institution has propelled the concept that paper records are handled by means of the electric data management. In this reformed model, however, we concentrates on the electric records, which have gradually replaced the paper records and investigate on the management methodology considering attributes of electric records. According to this new paradigm, the electric records management raises a new issue in the records management territory. As the major contents of the models connecting with electric records management were analyzed and their significance and bounds were closely reviewed, the aim of this paper is the understanding of the future bearings of the management system. Before the analysis of the reformed models, issues in new business environments and their records management were reviewed. The government's BRM and Business management system prepared the general basis that can manage government's whole results on the online and classify them according to its function. In this points, the model is innovative. However considering the records management, problems such as division into Records Classification, definitions and capturing methods of records management objects, limitations of Records Automation System and so on was identified. For solving these problems, the reformed models that has a records classification system based on the business classification, extended electronic records filing system, added functions for strengthening electric records management and so on was proposed. As regards dramatically improving the role of records center in public institution, searching for the basic management methodology of the records management object from various agency and introducing the detail design to keep documents' authenticity, this model forms the basis of the electric records management system. In spite of these innovations, however, the proposed system for real electric records management era is still in its beginning. In near feature, when the studies is concentrated upon the progress of qualified classifications, records capturing plans for foreign records structures such like administration information system, the further study of the previous preservation technology, the developed prospective of electric records management system will be very bright.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.32 no.1
• /
• pp.65-73
• /
• 2019

In order to increase the production efficiency of the ship and shorten the production cycle, it is important to evaluate the accuracy of the ship components efficiently during the drying cycle. The accuracy control of the block is important for shortening the ship process, reducing the cost, and improving the accuracy of the ship. Some systems have been developed and used mainly in large shipyards, but in some cases, they are measured and managed using conventional measuring instruments such as tape measure and beam, optical instruments as optical equipment, In order to perform accuracy control, these tools and equipment as well as equipment for recording measurement data and paper drawings for measuring the measurement position are inevitably combined. The measured results are managed by the accuracy control system through manual input or recording device. In this case, the measurement result is influenced by the work environment and the skill level of the worker. Also, in the measurement result management side, there are a human error about the lack of the measurement result creation, the lack of the management sheet management, And costs are lost in terms of efficiency due to consumption. The purpose of this study is to improve the working environment in the existing accuracy management process by using the augmented reality technology to visualize the measurement information on the actual block and to obtain the measurement information And a smart management system based on augmented reality that can effectively manage the accuracy management data through interworking with measurement equipment. We confirmed the applicability of the proposed system to the accuracy control through the prototype implementation.

• Korean Journal of Environmental Agriculture
• /
• v.37 no.4
• /
• pp.260-267
• /
• 2018

BACKGROUND: In this study, shoots of Aralia elata and Kalopanax pictus which belong to the Araliaceae family were analyzed using UPLC-DAD-ESI(+)-QToF/MS to characterize of individual phenolic acids. METHODS AND RESULTS: Total thirteen phenolic acids were identified, and nine hydroxycinnamic acid derivatives have been identified for the first time in shoots of Aralia elata and Kalopanax pictus. For total phenolic acid content (mg/100g dry weight), shoots of Aralia elata and Kalopanax pictus showed 754.8 and 845.3 mg/100g, respectively. 5-O-Caffeoylquinic acid (49%) and 3,5-di-O-caffeoylquinic acid (44%) were found as major phenolic acids in Aralia elata, while 5-O-caffeoylquinic acid (91%) was a major component in Kalopanax pictus. CONCLUSION: On comparing the two plants, it was considered that the biosynthesis of 3,5-di-O-caffeoylquinic acid can be affected by 5-O-caffeoylquinic acid in Aralia elata.