• Journal of Korean Association for Spatial Structures
• /
• v.11 no.2
• /
• pp.111-118
• /
• 2011

Single-layer latticed domes with rigid-joint have an advantage in the construction cost and the aesthetic. But, in single-layer latticed domes, the joints are hard to discriminate between pin-joint and rigid-joint, and consisted of semi-rigid joint in practical. And the erection of large roof structures requires special techniques. As one of these special techniques is the Step-Up erection method. This paper verified buckling characteristics of single-Layer lamella domes according to the Joint flexibility under construction by Step-up method. The results are follows: As erection steps increase, the buckling strength decreases. It is occurred the joint buckling by snap through on the top of dome when the joint flexibility close the rigid. And large tensile stress distribution appeared in circumferential member of bottom boundary when the step of construction is low. As the step of construction increase, large compressive stress distribution showed in the top of dome.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.15 no.3
• /
• pp.463-469
• /
• 2002

The governing equation and force-displacement rotations of a beam-column element on elastic foundation we derived based on variational approach of total potential energy. An exact static and dynamic 4×4 element stiffness matrix of the beam-column element is established via a generalized lineal-eigenvalue problem by introducing 4 displacement parameters and a system of linear algebraic equations with complex matrices. The structure stiffness matrix is established by the conventional direct stiffness method. In addition the F. E. procedure is presented by using Hermitian polynomials as shape function and evaluating the corresponding elastic and geometric stiffness and the mass matrix. In order to verify the efficiency and accuracy of the beam-column element using exact dynamic stiffness matrix, buckling loads and natural frequencies are calculated for the continuous beam structures and the results are compared with F E. solutions.

• Journal of Aerospace System Engineering
• /
• v.18 no.1
• /
• pp.21-28
• /
• 2024

In this paper, two prediction models based on deep neural network that could predict cross-sectional stiffness of a rotor blade were proposed. Herein, we employed structural and material information of cross-section. In the case of a prediction model that used material properties as the input of the network, it was designed to predict the cross-sectional stiffness by considering elastic modulus of each cross-sectional member. In the case of the prediction model that used structural information as a network input, it was designed to predict the cross-sectional stiffness by considering the location and thickness of cross-sectional members as network input. Both prediction models based on a deep neural network were realized using data obtained by cross-sectional analysis with KSAC2D (Konkuk section analysis code - two-dimensional).

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1995.04a
• /
• pp.608-614
• /
• 1995

공작기계 등과 같이 복잡한 대형 구조물의 구조해석에 있어서 결합부요소의 강성과 질량특성을 모델링하는 일반적 인 방법이 없는 실정이므로 어려움이많다. 본 연구에서는 공작기계에서 흔히 쓰이는 Slide-way contact joint 결 합부를 등가의 강성행렬 요소(Generalized stiffness matrix element)로 모델링하는 방법을 제안하였다.. 기존의 유 한용소 해석법 프로그램을 이용하여 결합부 유한요소 모델의 유연도계수(Flexibility influence coefficients)를 계산하고 Guyan의 정축약이론을 이용하여 등가의 강성행렬요소로 축약시키는 방법이다. 제안된 방법을 대형 평면연 삭기 구조해석에 적용하고, 그 결과를 강결합 모델의 결과 및 Yoshimura의 등가스프링결합부 모델을 사용한 경우의 결과와 비교하므로써 본 연구에서 제안한 결합부 모델링 방법의 유용성을 확인하였다.

• Computational Structural Engineering
• /
• v.5 no.3
• /
• pp.29-36
• /
• 1992

우리의 경제발전과 함께, 막구조 및 케이블구조를 이용한 특수 대공간 구조물이 더욱 더 늘어날 전망이며, 이들 구조물의 구조해석은 일반적인 범용ㅇ 구조해석 프로그램으로는 해석이 불가능하다. 즉, 대부분의 범용 구조해석 프로그램이 초기강성을 가진 구조물을 해석할 수 있는데 반해, 막구조 및 케이블 구조는 초기강성이 매우 약한 구조체이므로, 초기 불안정현상을 나타내고, 따라서 해석이 불가능하게 된다. 이러한 구조적 특징을 가진 막구조 및 케이블구조를 해석하기 위하여, 막 케이블 및 트러스요소로 구성된 복합구조체를 해석할 수 있는 범용 구조해석 프로그램인 McS(Membrane and Cable/Truss Structures)가 개발되었으며, 그 Flow-chart는 표1에서와 같다. McS는 현재, 한국에서는 성균관대학교 자연과학캠퍼스의 VAX-11, 1명진단조공업주식회사의 SUN 워크스테이션에서 작동중이며, 일본에서는 동경대학 생산기술연구소의 M-380 및 T.I.S. & Partners의 IBM 워크스테이션에서 작동중에 있다.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2011.04a
• /
• pp.685-688
• /
• 2011

본 논문에서는 다양한 음향 가진에 따른 음향 응답을 유한 요소법을 통하여 효과적으로 계산하기 위한 새로운 모델 축소법을 제안한다. 일반적인 유한 요소법을 통한 기계구조물의 응답을 구하기 위해서는 음향 방정식의 강성 및 행렬을 구한 뒤 이들의 조합을 통한 동적 강성행렬을 구한 뒤 역행렬을 구하여 다양한 주파수 응답을 구하게 된다. 현재 컴퓨터 하드웨어의 발전과 소프트 웨어의 발전에 의하여 더 많은 유한 요소를 사용할 수 있게 되었고 이로 인하여 더욱 정확하고 넓은 대역의 음향 응답을 구할 수 있게 되었다. 그러나, 아직까지도 아주 복잡한 구조물의 음향 응답을 구하기 위하여 유한 요소를 무한정으로 증가할 수 없는 경우가 많다. 이를 해결하기 위하여 일반적으로 모델 축소법(Model order reduction) 기법을 사용한다. 이 모델 축소법은 기본적으로 전체 행렬을 아주 작지만 효율적인 작은 행렬로 바꾸어 응답을 예측하는 기법으로 mode superposition method, ritz vector method, quasi-static ritz vector method등이 있다. 기존의 모델 축소법은 기본적으로 질량 및 강성행렬이 가진 주파수에 영향을 받지 않는 행렬이라 가정한다. 그렇기 때문에 경계조건이나 다공성 재료를 모델링할 경우 가진 주파수에 영향을 받는 강성행렬과 질량행렬이 만들어지게 되어 기존의 모델 축소법은 효과적이지 못하게 된다. 이런 문제점을 해결하기 위하여 이 논문에서는 Quasi-static ritz vector method의 기본적인 개념을 확장하여 여러 개의 중심 주파수(Center frequency)에서 기저를 계산하고 이를 동시에 이용하는 Multi-frequency quasi-static ritz vector method를 제안한다.

• Journal of Korean Society of Steel Construction
• /
• v.10 no.1 s.34
• /
• pp.63-72
• /
• 1998

The stiffness design method is presented as a drift control model of steel structures and applied to design of space trusses subjected to stress and displacement constraints. The stiffness design method is developed by integrating the resizing techniques for an effective drift control algorithm with the strength design process according to the commonly used design specifications such as allowable stress design. In the resizing technique the amount of material to be modified depends on the member displacement participation factors and is determined by an optimization technique. Using the stiffness design method, a structural design model for steel structures is proposed and applied to two verifying examples. As demonstrated in the examples, the displacement of the structures can be effectively controlled without expensive computational cost.

• Journal of Korean Association for Spatial Structures
• /
• v.12 no.3
• /
• pp.71-78
• /
• 2012

The dynamic behavior of spatial structures is different depending on the aspect ration of arch structure, as the rise-span ratio or open-angle, and these spatial structures show differently the character of seismic response in accordance with stiffness and connection of the lower support structures that are directly influenced by earthquake. Therefore, in this paper, dynamic analysis is conducted for seismic response of single layer arch structures by the influence of column's stiffness and connection, to reflect the different vertical and horizontal vibration mode of single layer arch structures. The vertical response of single layer arch structures is more influence by lower columns and the influence of column's connection rotational stiffness is not large, except to the hinged connections.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.18 no.2
• /
• pp.30-37
• /
• 2014

In this study, we studied how to perform the structural analysis which need a large-capacity flash memory with the computer program when the flash memory storage of a personal computer has no enough room for the analysis of structure. As one of the solutions of this problem, the blocking method of stiffness matrix, which is a method that stiffness matrix is divided by a few blocks and each block is sequentially used for the calculation of matrix decomposition, is proposed and an algorithm available in computer program is derived on the method. Finally, A structural analysis program (sNs) based on this study is developed and the correctness and efficiency of the algorithm is founded through some examples which are fundamental in structural analysis.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.25 no.5
• /
• pp.60-67
• /
• 2021

According to the 「Guidelines of Structural Design for Piloti Building」 of the Ministry of Land, Infrastructure and Transport (2018), the natural period of middle and low rise building of upper-walled lower frame type, such as the domestic multiplex house in piloti style, is suggested for safety to apply the existing code formula of the wall structure. However, the current code formula of the wall structure was provided based on actual measurement of high-rise wall-type structures that mainly exhibit bending behavior. So it is considered that it is not suitable for a piloti-type house with four stories or less, where the wall behaves in shear. See also Park et al. (2000) confirmed that the effect of the lower frame part is greater than that of the upper wall part in the natural period of complex structures with 10 or more floors through analytical studies. Therefore, in this study, in order to examine the effect of the lower frame on the natural period of the middle and low-rise piloti structure, the estimation of natural period by the finite element analysis, approximation formula and ccurrent code formula was performed for the target structures with the shear and flexural stiffness of the upper wall and the shear stiffness of the lower frame as variables. As result, it was found that the change in the shear stiffness of the lower frame had a greater effect on the natural period of the whole building than the change in the bending or shear stiffness of the upper wall.