• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.32 no.6
• /
• pp.359-366
• /
• 2019

Experimental and analytical studies on the behavioral characteristics of a pre-stressed (PS) steel girder are conducted to investigate the effects of deviators on the non-linear inelastic properties of the PS system. In this regard, 4 test specimens consisting of a steel H-beam, a straight cable with eccentricity, anchorages, and deviators are built and failure tests are performed under two-point loading. In addition, in-plane elastic deformation theories for the PS system without a deviator, and with three deviators at regular intervals are analytically formulated and solved using a symbolic calculation technique. To verify the validity of the experimental and the proposed analytical theories, the results obtained using FEM models composed of beam elements, rigid beam elements, and truss cable elements, are compared to the experimental results and the analytical solutions. As a result, it is determined that externally installed un-bonded deviators inhibit flexural deformation of the deformed beam to such an extent that their elastic stiffness, and failure strength are significantly improved compared to those of the PS system without deviators.

• The Korean Journal of Air & Space Law and Policy
• /
• v.29 no.1
• /
• pp.97-126
• /
• 2014

October 4, 1957 the Soviet Sputnik 1 was launched into space the first time in the history of mankind. After launching, the realm of humankind was expanded to space. Today all countries of the world wage a fierce competition in order to utilize space for various purposes. World powers of space such as United States, Russia, China, and Japan, put reconnaissance satellites and ocean surveillance satellites into orbit, being able to easily see equipment and troops movement on earth. Each country makes efforts to occupy space assets through the militarization of space and expand national interests. Recently private companies or individuals involved in commercial space activities are becoming more prevalent. Thus, in addition to space activities for military purposes, commercial space activities become widespread. Individuals and private companies as well as nations are also involved in space activities. Outer space is not the monopoly of space powers such as the United States and Russia. The whole human race can benefit from free access to space, being the common heritage of mankind. In particular, outer space becomes an indispensable element of military activities and human life. Many countries are now entering space development, putting a lot of budget into new development programs. Republic of Korea also built the Narodo Space Center, starting its space development with budget and manpower. We have to find out ways to use space not only for military purposes but also for commercial space activities that can contribute to the national economy. In addition, through the joint efforts of the international community, we have to make efforts for preservation and peaceful use of space. Various issues relating to space activities and research should be studies in order to contribute to the progress of humanity. Those issues include the definition of outer space, space debris reduction and environmental conservation issues, non-bind measure cooperation - European International Code of Conduct, space law and national legislation related empowerment issues, arms control measures in space, and restrictions on the use of nuclear fuel. We also need to be involved in the discussion of those issues as one of responsible space countries. In addition, we try to find out regional cooperation schemes such as the ESA in the Europe actively. Currently in the Northeast Asia, cooperation bodies led by Japan and China respectively, are operated in the confrontational way. To avoid such confrontation, a new cooperative body needs to be established for cooperation on space exploration and information. The system to allow the exchange of satellite information for early warning of natural disasters needs to be built as well. In addition, efforts to enhance the effectiveness of the relevant international treaties on space, and fill in the blanks in international space laws should be made at the same time. To this end, we have to do a leading role in the establishment of standards such as non-binding measures (resolution) - Code of Conduct, being discussed in the UN and other organizations, and compliance with those standards. Courses in aerospace should be requires in law schools and educational institutes, and professional manpower need to be nurtured. In addition, the space-related technology and policy needs to be jointly studied among the private, public, and military groups, and the cross exchange among them should be encouraged.

• Korean Journal of Social Welfare
• /
• v.53
• /
• pp.75-104
• /
• 2003

This study was performed to analyze the process and develop the pattern of school dropout in the context of the Korean educational systems. Participants were 30 adolescents experiencing dropout one more times and their age ranged from 16 to 23. A major category derived and analysed from a grounded theory method of Strauss and Corbin(1990). The qualitative analysis indicated that dropout is contradictory experiences in Korea. Because it is emancipation from various distress of school systems as well as loss of various benefit as students, Main causes of dropout were identity problems, school frustrations(failure in school achievements), environmental disadvantaged and delinquencies. Sometimes these various causes are emerged at the same time. Most important condition of context which was decided was whether dropout was voluntary and considered. After dropout from school, it was important if there were resources such as emotional and informative supports. Especially informative support was critical to adjust after dropout. Dropout experience was divided largely into 4 patterns such as type of 'searching the identity', 'being disorganized', 'escaping' and 'frustration'. In chronological analysis resulted in 4 stages including 'stage I. loss of motivation', 'stage II. escaping from school', 'stage III. trial and error', 'stage IV changing the meaning of dropout in the life.

• Polymer(Korea)
• /
• v.36 no.2
• /
• pp.131-136
• /
• 2012

Residual stress is developed in the injection molded articles during the molding process due to temperature variation and shear stress. The residual stress causes the deformation and warpage in the injection molded parts shortly within several days or after several years. Therefore, the injection molding conditions should be optimized to reduce the residual stress. And residual stress in the part should be also relaxed after molding process to maintain its shape. According to the annealing conditions, such as relative humidity, temperature and time, this study investigates the relaxation of residual stress generated in the transparent injection molded specimens. Through the experimental results, it was realized that the residual stress was relaxed at a relative humidity higher than 50%. Utilizing photoelasticity equipment, it was found that the residual stress was rapidly relaxed near glass transition temperature. Additionally, we recognized that the specimen shrunk along the flow direction but expanded to the perpendicular direction of the flow during the annealing processes, which resulted in the warpage of the specimen.

• Journal of the Korean Vacuum Society
• /
• v.18 no.1
• /
• pp.37-43
• /
• 2009

Temperature and injection current dependence of electroluminescence(EL) spectral intensity of the $In_xGa_{1-x}N$/GaN multi-quantum wells(MQW) have been studied over a wide temperature range and as a function of injection current level. It is found that a temperature-dependent variation pattern of the EL efficiency under very low and high injection currents shows a drastic difference. This unique EL efficiency variation pattern with temperature and current can be explained field effects due to the driving forward bias in presence of internal(piezo and spontaneous polarization) fields. Increase of the indium content in $In_xGa_{1-x}N$/GaN multiple quantum wells gives rise to a redshift of 80 meV and 22 meV for green and blue MQW, respectively. It can be explained by carrier localization by potential fluctuation of multiple quantum well and MQW structures also shows a keen difference owing to the different indium content in InGaN/GaN MQW.

• Korean Journal of Materials Research
• /
• v.3 no.2
• /
• pp.121-130
• /
• 1993

The GaP crystals were grown by synthesis solute diffusion method and its properties were investigated. High quality single crystals were obtained by pull-down the crystal growing ampoule with velocity of 1.75mm/day. Etch pits density along vertical direction of ingot was increased from 3.8 ${\times}{10^4}$c$m^{-2}$ of the first freeze to 2.3 ${\times}{10^5}$c$m^2$ of the last freeze part. The carrier concentration and mobilities at room temperature were measured to 197.49cc$m^2$/V.sec and 6.75 ${\times}{10^{15}}$c$m^{-3]$, respectively. The temperature dependence of optical energy gap was empirically fitted to $E_g$(T)=[2.3383-(6.082${\times}{10^{-4}}$)$T^2$/(373. 096+TJeV. Photoluminescence spectra measured at low temperature were consist with sharp line-spectra near band-gap energy due to bound-exciton and phonon participation in band edge recombination process. Zn-diffusion depth in GaP was increased with square root of diffusion time and temperature dependence of diffusion coefficient was D(Tl = 3.2 ${\times}{10^3}$exp( - 3.486/$k_{\theta}$T)c$m^2$/sec. Electroluminescence spectra of p-n GaP homojunction diode are consisted with emission at 630nm due to recombination of donor in Zn-O complex center with shallow acceptors and near band edge emission at 550nm. Photon emission at current injection level of lower than 100m A was due to the band-filling mechanism.

• Journal of the Korean Geotechnical Society
• /
• v.18 no.5
• /
• pp.251-260
• /
• 2002

Geotextile tribes are made of sewn geotextile sheet and hydraulically or mechanically filled with dredged materials. They have been applied in hydraulic and coastal engineering in recent years(shore protection structure, detached breakwater, groins, and jetty). Therefore, it is composed of geotextile and confined fill material. Recently, new preliminary design criteria supported by model and prototype tests, and some stability analysis calculations have been studied. The stability analysis of geotextile tube is composed of geotechnical and hydrodynamic analysis. The stability check points are sliding failure, overturning, bearing capacity failure against the wave attack. In this paper are presented the stability analysis method by empirical equation and 2-D equilibrium analysis for geotextile tube. Also, the hydraulic model tests were performed to verify the theoretical stability analysis with geotextile tube shape, filling ratio, significant wave height, and so on. The results of this study show that the stability of geotextile tube depends on the tube shape, contact area, projection area. The theoretical analysis and hydraulic model test show almost the same results.

• Journal of the Korean Geotechnical Society
• /
• v.28 no.12
• /
• pp.53-64
• /
• 2012

In this study, the modified cyclic triaxial tests with Joomunjin standard sand are performed for dynamic deformation characteristics, such as Young's moduli and damping ratio. The cyclic triaxial test is equipped with Local Displacement Transducer (LDT) on the outside of a cell which has a range from $10^{-4}$ to $10^{-1}$ of shear strains, ${\gamma}$ (%), instead of conventional cyclic triaxial test which has linear variable displacement transducer (LVDT) with low precision. With the small strain control, tests were carried out at various loading rates, void ratios, and effective confining pressures. Based on the test results, such as dynamic deformation characteristics, shear modulus, and damping ratio, it is found that the test can measure more range of medium strains (0.02-0.2%) than results obtained from conventional test (resonant column test). For the medium strain range, dynamic deformation characteristics investigated by the cyclic triaxial test are also different from those predicted by nonlinear model in conventional test.

• Journal of the Korean Geotechnical Society
• /
• v.28 no.12
• /
• pp.41-51
• /
• 2012

Soils are commonly unsaturated in the near surface. The stiffness of soils is affected by the amount of air and water. The objective of this study is to evaluate the porosity of the unsaturated soils by using the elastic waves including compressional and shear waves. The elastic waves are measured at different degrees of saturation by controlling the matric suction. Thus, the unsaturated soils are characterized at different levels of the matric suction. Shear and compressional waves are measured by using the bender elements and the piezo disk elements, respectively. Both transducers are installed on the walls of the rectangular cell. The unsaturated soils are prepared by using uniform size sands and silts. Test results show that both compressional and shear wave velocities change according to the matric suction. The elastic modulus, the shear modulus, and the Poisson's ratio are estimated based on the measured elastic wave velocities. In addition, the void ratio of the unsaturated soils estimated using elastic wave velocities matches well with the volume based void ratio. This study demonstrates that the elastic waves can be effectively used for the characterization of unsaturated soils.

• Journal of the Korean Geotechnical Society
• /
• v.27 no.11
• /
• pp.71-81
• /
• 2011

Adfreeze bond strength is a primary design parameter, which determines bearing capacity of pile foundation in frozen ground. It is reported that adfreeze bond strength is influenced by various affecting factors like freezing temperature, confining pressure, characteristics of pile surface, soil type, etc. However, several limited researches have been performed to obtain adfreeze bond strength, for past studies considered only few affecting factors such as freezing temperature and type of pile structures. Therefore, there exists a limitation of estimating the design parameter of pile foundation with various factors in frozen ground. In this study, artificial neural network algorithm was involved to predict adfreeze bond strength with various affecting factors. From past five studies, 137 data for various experimental conditions were collected. It was divided by 100 training data and 37 testing data in random manner. Based on the analysis result, it was found that it is necessary to consider various affecting factors for the prediction of adfreeze bond strength and the prediction with artificial neural network algorithm provides enough reliability. In addition, the result of parametric study showed that temperature and pile type are primary affecting factors for adfreeze bond strength. And it was also shown that vertical stress influences only certain temperature zone, and various soil types and loading speeds might cause the change of evolution trend for adfreeze bond strength.