• Journal of Welding and Joining
• /
• v.15 no.1
• /
• pp.9-14
• /
• 1997

본 보에서는 용접열영향부에 작용되는 구속응력을 유한요소법으로 평가하는 방법에 대하여 소개하였다. 이를 통하여 주어진 용접부에 작용되는 구속도는 물론 구속응력을 정량적으로 평가할 수 있다. 이와 같은 구속응력은 용접부 주변의 구속 여건 뿐만 아니라 용착금속의 형상인 루트부 경사각이나 용접시공방법에 영향을 받게 된다. 따라서 용접부 균열방지를 위한 구속응력을 정량적으로 평가하기 위해서는 상기된 인자들을 고려해야 한다.

• Journal of Korean Society of Steel Construction
• /
• v.13 no.5
• /
• pp.547-556
• /
• 2001

This study presents new method in which to derive the constraint coefficient from the quantity of angular deformation by welding measured by varying the shape of welded joints and the magnitude of constraints by varying the shape of welded joints and the magnitude of constraints by experiment and from the result analyzed by elastic FEM method and then to decide equivalent load with it The numerical analysis results by this new method verified the validity by agreeing with the experimental result on specimen. In addition These results are applicable to the prediction of the quantity of welding deformation for large structures regardless of the size and the shape While in the effects of the constraints based on the shape of welded joints in the case of Butt welding when the constraint coefficients are not considered the deformed quantity is produced larger than one by the experiment and consequently is largely affected by the constraints But in the case of Fillet welding the deformed quantity is seldom affected regardless of considering the constraint coefficients or not.

• Journal of Welding and Joining
• /
• v.17 no.1
• /
• pp.104-115
• /
• 1999

There have been many studies on the two dimensional thermo-elasto-plastic analysis in welding process, mostly from viewpoint of residual stresses. In this study, the temperature distribution, transient thermal stress, and angular distortion during bead-on-plate gas metal arc welding of rectangular plates were analyzed by using the finite element method. A nonlinear heat transfer analysis was first performed by taking account of the temperature-dependent material properties and convection heat losses on the surface. This was followed by a thermo-elasto-plastic stresses and distortion analysis that incorporates the constrained boundary condition of the two dimensional solution domain to get the three dimensional size effect of the plate. The constrained boundary conditions adopted in this study were the constant displacement condition over the whole two dimensional section for axial movement in the welding direction, and the force boundary condition for rotational movementof the domain around the axis of the welding direction. It could be revealed that the theoretical predictions of the angular distortion have an improved agreement with the experimentally obtained data presented in the previous study.

• Proceedings of the KWS Conference
• /
• 1999.10a
• /
• pp.327-330
• /
• 1999

• Proceedings of the KWS Conference
• /
• 2000.10a
• /
• pp.131-134
• /
• 2000

• Proceedings of the KWS Conference
• /
• 1996.05a
• /
• pp.173-175
• /
• 1996

• Proceedings of the KWS Conference
• /
• 1998.10a
• /
• pp.313-316
• /
• 1998

• Proceedings of the KWS Conference
• /
• 2001.05a
• /
• pp.165-167
• /
• 2001

• Proceedings of the KWS Conference
• /
• 1995.04a
• /
• pp.142-144
• /
• 1995

• Journal of Welding and Joining
• /
• v.22 no.2
• /
• pp.1-2
• /
• 2004

강구조물 제작시 용접프로세스에 의해 용접부 근방에서는 용접열원에 의해 급속가열ㆍ급속냉각의 열 사이클을 받으며, 열원의 이동과 함께 온도장이 변화하므로 용접부에 불균일한 온도분포가 발생된다. 이러한 불균일한 온도분포에 의한 용접부 근방의 열팽창ㆍ수축을 용접부로부터 떨어져 있는 저온상태의 부재가 이를 구속하여 결과적으로 용접변형과 잔류응력이 발생한다.(중략)