• Journal of Digital Convergence
• /
• v.11 no.9
• /
• pp.147-151
• /
• 2013

On retrieving high frequency keywords in information retrieval system, mismatchings to user's request are problems because of the various meanings of keywords in the existing ontology configuration. In this paper, it is to construct personnel selection ontology and rules in personnel management which are composed of various concepts and knowledges based on semantic web technology and suggest selection procedures to support these rules and knowledge retrieval system to verify suitability of selection results. This system utilizes a method of extraction of speech features by using non-parametric correlation coefficient. This proposed method has been validated by showing that the result average SNR of the experiment evaluation of the proposed techniques was shown to be decreased by .752dB.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1995.10a
• /
• pp.259-264
• /
• 1995

Recently, in order to achieve high flexibilty, monitoring and control strategies of a new type have been developed. This paper investigates the fesability of using scoustic emission signal analysis for the detection of built-up edge during machining. Results for maching SM45C steel show that the presence of a built-up edge can significantil affect the generation of acoustic emission in metal cutting. When the cutting speed comes to the conditions conducive to development of built-up edge, it is shown that the slope of curve-fitted AErms signal undergoes a change. The fesability of utilizing AErms in built-up edge sensing is sugested.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1996.11a
• /
• pp.200-205
• /
• 1996

Recently, in order to achieve high flexibility of manufacture, monitoring and control strategies cf a new type have been developed. Since the generation of built-up edge on the cutting tool damages the surface finish of the workpiece, the monitoring system of built-up edge is an important process monitoring. In this study, the analyzing methods of cutting force signal to detect the built-up edge during cutting process are described. The cutting force signals are analyzed using the mean, standard deviation and mean to standard deviation of this cutting signals. We can obtain the guide to detect the built-up edge during turning process.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.3 s.96
• /
• pp.18-24
• /
• 1999

ThisPaper investigates the feasibility of using acoustic emission signal analysis for the detection of built-up edge during machining. Experiments were conducted on a CNC-lathe using conventional carbide insert tools under various cutting conditions. The cutting forces were also measured for comparisons. Experimental evidence is presented which indicates that the presence of a built-up edge can significantly affect the generation of acoustic emission in metal cutting. It is shown that under conditions in which a built-up edge is generated, the variation of $AE_{rms}$ signal with cutting speed can be quite different from the generally accepted linear, monotonic increase as previously reported. The feasibility of utilizing $AE_{rms}$ in built-up edge sensing is suggested.

• Journal of the Korean Society for Precision Engineering
• /
• v.14 no.7
• /
• pp.67-72
• /
• 1997

Recently, in order to achieve high flexibility of manufacture, monitoring and control strategies of a new type have been developed. Since the generation of built-up edge on the cutting tool damages the surface finish of the workpiece, the monitoring system of built-up edge is an important process monitoring. In this study, the analyzing methods of cutting force signal to detect the built-up edge during cutting process are described. The cutting force signals are analyzed using the mean, standard deviation and mean to standard deviation of this cutting signals. We can obtain the guide to detect the built-up edge during turning process.

• 월간낙농육우
• /
• v.17 no.10 s.186
• /
• pp.101-102
• /
• 1997

새로운 법인으로 구성될 진흥회는 기구의 구성과 구성원의 인선 작업은 물론 집유조합의 지정과 원유의 구매$\cdot$ 공급계약 및 가격과 수급계획, 소비홍보 등등 여러 가지 업무를 수행하면서 각종 단체와의 이해관계로 많은 난제에 부딪칠 수 있다. 한국낙농산업의 먼 장래를 바라보는 혜안을 가지고 사심없는 업무처리로 국내 낙농산업발전의 큰 역할을 기대한다.

• Journal of the Korean Society for Precision Engineering
• /
• v.18 no.5
• /
• pp.130-136
• /
• 2001

Generally, a metal slitting saw is plain milling cutter with thickness less than 3/16 inch. This is used for cutting a workpiece that high dimensional accuracy and surface finish is necessary. A small thin milling cutter like a metal slitting saw is useful for machining a narrow groove. In this case, built up edge(BUE) is severe at each tooth and affects the surface integrity of the machined surface and tool wear. It is well known that tool geometry and cutting conditions are decisive factors to remove BUE. In this paper, we optimized the geometry of the milling cutter and selected cutting conditions to remove BUE by the experimental investigation. The experiment was planned with Taguchi method based on the orthogonal array of design factors such as coating, rake angle, number of tooth, cutting speed, feed rate. Response table was obtained from the number of built-up edge generated at tooth. The optimized tool geometry and cutting conditions could be determined through response table. In addition, the relative effect of factors was identified bh the analysis of variance (ANOVA). Finally, coating and cutting speed turned out important factors for BUE.

• Journal of Digital Convergence
• /
• v.11 no.11
• /
• pp.351-357
• /
• 2013

Information retrieval by query keywords have some mismatching problems to fit user's requirement for the retrieved documents due to the varieties of users. These problems are originated from the different situations and characteristics of user's requirement. Also, it has a problem that general correlation coefficients did not display the information relations. In this thesis, it is to suggest knowledge retrieval system to verify feasibility of personnel selection procedure and results supporting selection rules after construction of personnel selection ontologies and rules composed of various concept and knowledge based on the semantic web technology. In the suggested system, it is to clear disadvantages of limited information retrieval providing the suitable information to satisfy user's different situations and characteristics using Spearman's coefficients. Experimental results by this semantic-based information retrieval show 90.3% of accuracy and 71.8% of recall compared with legacy keyword information retrieval.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2000.04a
• /
• pp.39-45
• /
• 2000

This paper describes the fundamental investigations on the in-process monitoring techniques focused on Acoustic Emission(AE) based on analytical method. Experiments were conducted on a CNC lathe using conventional carbide insert tools under various cutting conditions. As the result of this study a suggestion is given about the multi-purpose use of AE-signals detected with a single sensor for the monitoring of tool wear, built-up edge and chatter vibration in turning process.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2003.07a
• /
• pp.434-439
• /
• 2003

바이오센서는 특정 물질과 선택적으로 결합하여 전기 신호를 발생시킬 수 있는 소자로 구성되어 있다. 감응 물질에 따라 효소 센서, 미생물 센서, 항원/항체 반응을 이용한 센서들이 있으며, 분석 대상 물질에 대해서 선택적으로 감응한다. 따라서, 바이오센서는 특정 물질의 정량에는 우수한 성능을 발휘하고 있으며, 이에 대한 연구가 활발히 진행되고 있다. 그러나, 향기, 주류, 음료 등의 다양한 성분이 혼합되어 있는 시료들은 각 성분의 복합적인 영향에 의해서 품질이 표현되기 때문에, 바이오센서의 적용은 한계를 가지고 있다. (중략)