• The Korean Journal of Soil Zoology
• /
• v.7 no.1_2
• /
• pp.7-16
• /
• 2002

This study was based on 8 species as follows. Specimens had been collected from 8 localities in Korea from April to September, 2002: Echinozercon orientalis Blaszak, 1975 Eurozercon pacificus Halaskova, 1979 Kaikiozercon mamillosus Halaskova, 1979 Kaikiozercon peregrinus Halaskova, 1979 Koreozercon bacatus Halaskova, 1979 Mesozercon coreanus Blaszak, 1975 Mesozercon plumatus (Aoki, 1966) Zercon szeptyckii Blaszak, 1976 The size of idiosoma and the length of setae on proscrotum and postscrotum were compared with the data of North Korean specimens . Two species (E. orientalis, Z. szeptyckii) are similar, three species (E. orientalis, K. bacatus, M. coreanus) are small but not much different and the rest three species (K. mamillosus, K. peregrinus, M. plumatus) are small and much different in measurements of setae from those of the North Korean specimens.

• The Korean Journal of Zoology
• /
• v.38 no.3
• /
• pp.364-374
• /
• 1995

The taxonomic revision of the family Uranoscopidae from Korea was made on the basis of the speciemens collected in the coasts of the Korea from 1986 to 1994. The key to the species and genera for classification of the famiiy Uranoscopidae was provided with synonym and their distributions. The stagazer fishes from Korea are composed of 6 species in 3 genera: Uranoscopus Japonicus, U. bicinctus, U. chinensis, U. tosae, Gnathagnus eolngatus and Ichthyscopus lebeck sannio. The Korean stagazer fishes were widely distributed in the West and South Sea of Korea, but only Ichthyscopus lebeck sannio distributed in the around sea of Cheju Island.

• The Korean Journal of Rheology
• /
• v.1 no.1
• /
• pp.5-11
• /
• 1989

슬릿트나 관형의 흐름에서 유체의 유변학적 성질을 측정하기 위해서는 벽면에서의 압력구배를 알아야한다. 벽면에서의 압력측정은 특히 관형의 경우 압력구멍의 존자가 불가 피하다. 압력구멍에 의한 오차에 대한 이론적인 고찰이 있었지만 사용된 몇가지 가정이 실 험적인 과찰과 일치하지 않아 이들 이론에 대한 강한 의문을 제기하고 한다. 한편 실험적인 결과는 묽은 고분자 용액인 경우 측정압력에 대한 상대적인 압력구멍 오차가 무시할 수 없 을 정도로 크다. 압력구멍 오차는 압력구멍의 크기, Reynolds 수 (점성) 및 Weissenberg 수 (탄성)의 함수로 나타나고 있다. 그러나 농도가 비교적 높은 고분자 용액이나 용융체는 상대 적으로 무시할 수 있을 정도의 압력구멍 오차를 나타낸다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.05a
• /
• pp.244-244
• /
• 2004

다양한 산업 분야에서 세장비가 높은 구멍 가공의 필요성이 증가하고 있다. 방전 가공은 세장비가 높은 미세 구멍을 가공하는데 매우 효과적인 방법이다. 그러나 일반적인 방전 가공으로는 세장비가 5이상 되는 깊은 구멍을 가공하기가 쉽지 않다 구멍을 가공할 때에 일정 깊이 이상으로 가공이 진행되면 가공 부스러기가 쉽게 배출되지 못하여 방전 집중 현상과 아크 방전이 일어나게 된다. 이로 인해 깊은 구멍 가공이 불가능하게 된다. 그러나 절연액에 초음파를 부가하여 가공을 하면 공구와 가공물 사이의 기공 부스러기가 분산되어 방전 집중 현상과 아크 방전 현상이 사라지고 가공이 원활히 이루어진다.(중략)

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.05a
• /
• pp.254-254
• /
• 2004

미세 방전 가공은 전도성 재료에 미세 구멍을 가공할 때 주로 적용되는 방법이다. 그러나 미세 방전가공을 이용하여 구멍을 가공할 때 직경이 일정한 공구를 사용하더라도 입구와 출구의 직경에는 차이가 생긴다. 구멍의 벽면과 공구사이에는 2차 방전이 발생하고 상대적으로 2차 방전의 영향을 많이 받는 입구가 출구보다 직경이 커지게 된다. 이 때문에 미세 구멍의 단면 형상은 깊이 방향으로 테이퍼가 생기게 되며, 이로 인해 진직 구멍을 가공할 수 없게 된다. 따라서 이 논문에서는 이러한 테이퍼 형상을 제거하여 진직 구멍을 가공하는 방법에 관해 연구하였다.(중략)

• The Korean Journal of Mycology
• /
• v.20 no.1
• /
• pp.1-10
• /
• 1992

Fresh fungi were collected during field trips to Ullung Island from August, 1990, to September, 1991. Among them, some polyporoid fungi were recognized to the species. Thirty three species were identified, among which nine fungi were confirmed new in Korea and registered here with descriptions. These fungi are Auriporia aurulenta, Ceriporiopsis gilvescens, Ceriporiopsis subvermispora, Gloeophyllum trabeum, Junghuhnia separabilima, Oligoporus stipticus, Oxyporus similis, Phellinus lavigatus, and Polyporus melanopus.

• Journal of Korean Society of Steel Construction
• /
• v.20 no.6
• /
• pp.683-690
• /
• 2008

When steel fabricators erect structural members in field, temporary tightening of fastener should be useful. However, if bolt holes are not aligned by production error or natural condition, additional effort andpain should be provided to align bolt holes. It lead to longer period than times of construction (a primarily day of construction) and more cost than originally cost. This problem will be overcomed by oversize or slotted holes. Early, AISC and Eurocode have included provision for design process such oversize or slotted holes. But, domestic design method is not refered about oversize and slotted holes. Meanwhile, domestic design method and construction environment are variance with Europe and the United States of America. Therefore, a suitable design method for oversize and slotted holes in domestic real condition is needed. In this study, we evaluated behavior of the joints and decided the friction coefficient on oversize and slotted holes of friction joints with high strength bolts.

• Animal Systematics, Evolution and Diversity
• /
• v.17 no.2
• /
• pp.191-205
• /
• 2001

This study includes the taxonomy, description, and a key to species of mites in the Family Zerconidae(Acari, Mesostigmata) from the Korean Peninsula. Materials examined and information gathered were based on 1,020 specimens which has been collected nation-wide from April, 1994 to May, 2000. As a result of this study, the following 8 species were identified : Exhinozercon orientalis Blazak, 1975, Eurozercon pacificus Halaskova, 1979, Kaikiozercon mamillosus Halaksova, 1979, Kaikiozercon peregrinus Halaskova, 1979, Koreozercon bacatus Halaskova, 1979, Mesozercon coeranus Blaszak, 1975, Mesozercon plumatus (Aoki, 1966), Zercon szeptyckii Blaszak, 1976. Predominant species was Zercon szeptyckii which has been collected more then 600 specimens at 25 localities in the Korea Peninsula. Seven species except Mesozercon plumatus(Aoki, 1966) had been recorded from North Korea but newly recorded from the southern part of Korean Penunsula.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.14 no.4
• /
• pp.761-768
• /
• 1990

본 연구에서는 4-점 굽힘시험 장치를 이용하여 구멍의 표면에서 응력구배를 발생시켰을 때 (구멍의 깊이 방향으로는 응력구배가 없음), 구멍을 뚫기전 표면의 응 력구배를 고려하여 산정한 하중상태와 구멍을 뚫은 후 이완되는 잔류응력을 비교하였 다. 또한 잔류응력 측정시 구멍의 진원도에 대하여 실험적으로 연구하였으며, 구멍 직경의 측정오차가 잔류응력 측정에 미치는 영향을 분석하였다. 연구결과 4-점 굽힘 시험시 하중상태는 응력구배를 고려하여 계측되어야 하며, 응력구배장에서의 잔류응력 을 로젯트 게이지 중심에 존재하는 균일응력으로 나타낼 수 있다.

• Korean Journal of Cognitive Science
• /
• v.27 no.3
• /
• pp.355-376
• /
• 2016

We used holes defined by color similarity (Experiment 1) and binocular disparity (Experiment 2) to study how the inner contour of an object (i.e., boundary of a hole in it) is encoded in visual working memory. Many studies in VWM have shown that an object's boundary properties can be integrated with its surface properties via their shared spatial location, yielding an object-based encoding benefit. However, encoding of the hole contours has rarely been tested. We presented objects (squares or circles) containing a bar under a change detection paradigm, and relevant features to be remembered were the color of objects and the orientation of bars (or holes). If the contour of a hole belongs to the surrounding object rather than to the hole itself, the object-based feature binding hypothesis predicts that the shape of it can be integrated with color of an outer object, via their shared spatial location. Thus, in the hole display, change detection performance was expected to better than in the conjunction display where orientation and color features to be remembered were assigned to different parts of a conjunction object, and comparable to that in a single bar display where both orientation and color were assigned into a single bar. However, the results revealed that performance in the hole display did not differ from that in the conjunction display. This suggests that the shape of holes is not automatically encoded together with the surface properties of the outer object via object-based feature binding, but encoded independently from the surrounding object.