• Journal of the Korean Society of Propulsion Engineers
• /
• v.8 no.2
• /
• pp.85-94
• /
• 2004

Experimental study on combustion characteristics of double swirl coaxial injectors has been conducted for the assessment of critical injector design parameters. A reusable, unielement thrust chamber has been fabricated with a water-cooled copper nozzle. Two principal design parameters. a swirl angle and a recess length, have been investigated through hot firing tests for the understanding of their effects on high pressure combustion. Clearly, both parameters considerably affect the combustion efficiency, dynamics and hydraulic characteristics of an injector. Internal mixing of propellants in a recess region increases combustion efficiency along with the increase of a pressure drop required for flowing the same amount of mass flow rates. It is concluded that pressure buildup due to flame can be released by the increase of LOx flow axial momentum or the reduction of a recess length. Dynamic pressure measurements of the thrust chamber show varied dynamic behaviors depending on injector configurations.

• Progress in Medical Physics
• /
• v.22 no.2
• /
• pp.85-91
• /
• 2011

The energy spectra for electron beam of medical linear accelerator were calculated using a GEANT4 Medical Linac 2 example code. The incident electron mean energy were 6, 9, 12, 16, 20 MeV. This code was designed to calculate electron beam energy spectra according to material, thickness and location of electron scattering foil affecting electron beam characteristic. Lead, Copper, Aluminum and Gold were used for scattering foil. The energy distribution for electron and photon were analyzed by changing position of scattering foil in the head of linear accelerator. The effect of electron scattering foil on energy spectra which is basic data of simulation for medical linear accelerator were presented. The calculated results would be used in design of medical accelerator head.

• Journal of the Korean Geographical Society
• /
• v.41 no.6 s.117
• /
• pp.670-681
• /
• 2006

The purpose of this study is to clarify the behavior of subsurface water flow during rainfall on the hillslope in the Dongguneung experimental basin. As a result of the study, the following conclusions were obtained. Under the total rainfall of 20mm, there were no groundwater level changes. However, it was found that total rainfall amount and rainfall intensity were important factors to change groundwater level in hilly slope. Also the rainfall duration and preexisted rainfall amount were important factors to change it on the head hollow. To analyze the modification of 'U-shaped Gol' landform, the pattern of return flow and through flow have to check during storm events. The microgeomorphic change of head hollow is based on the pattern of subsurface water flow.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.39 no.7
• /
• pp.599-607
• /
• 2015

In this study, we theoretically investigate the thermal performances of heat pipes that have different nano-fluid properties. Two different types of nano-particles have been used: $Al_2O_3$ and CuO. The thermal performances of the heat pipes are observed for varying nano-particle aggregations and volume fractions. Both the viscosity and the conductivity increase as the volume fraction and the aggregation increase, respectively. Increasing the volume fraction helps increase the capillary limit in the well-dispersed condition. Whereas, the capillary limit is decreased under the aggregate condition, when the volume fraction increases. The dependence of the heat pipe thermal resistance on the volume fraction, aggregation, and conductivity of the nano-particles is analyzed. The maximum thermal transfer of the heat pipe is highly dependent on the volume fraction because of the high permeability of the heat pipe. For the proposed heat pipe, the optimum volume fraction of the nano-particle can be seen through 3D graphics.

• Applied Biological Chemistry
• /
• v.37 no.3
• /
• pp.168-174
• /
• 1994

Effects of filtration and centrifugation on the oxidative stabilities of sesame oils during storage at $70^{\circ}C$ were studied by combination of determining peroxide values and conjugated dienoic acid values of oils and measuring the hexanal formation using headspace gas chromatography. Crude sesame oil from roasted seeds contained more free fatty acids, conjugated dienes, and metals (Fe, Cu, Mg and Zn); on the other hand, higher contents of moisture and ${\gamma}-tocopherol$ were found in the filtered or centrifuged oil. Only filtered oil contained more peroxides than the crude oil in spite of the color advantage of the highest L and b values among three oils. All the oils showed the tendency of increasing in total color difference during storage at $70^{\circ}C$, fatty acid compositions were relatively constant except for decreasing tendency of linoleic acid in filtered oil. No significant difference at 1% in the oxidative stabilities was observed between centrifuged oil and crude oil with higher susceptibility to the oxidation in the filtered oil. Centrifuged sesame oil was the best in the aspect of both oxidative stability and the oil color.

• Economic and Environmental Geology
• /
• v.46 no.6
• /
• pp.509-520
• /
• 2013

In this study, heavy metals are removed by soil washing from soils contaminated with Cu, Zn, and Pb, whose maximum concentrations are up to 3350, 1220, and 2240 mg/kg, respectively. Through various soil washing experiments, the optimum conditions, including type and concentration of washing reagent, washing time, mixing ratio of soil and washing reagent, and stirring speed, are derived for effective removal of the heavy metals. It is found that the most effective washing reagent and its concentration are hydrochloric acid and 50 mM, respectively. The most suitable washing time is 30 minutes and the optimal mixing ratio of soil and washing reagent is 1:30 (g/mL). The removal efficiency, on the other hand, is not affected by stirring speed. The removal efficiencies of the heavy metals decrease when washing reagent is reused. Furthermore, the heavy metals are readsorbed onto soil in case of consecutive reuse of washing reagent.

• Journal of the Korean Applied Science and Technology
• /
• v.33 no.1
• /
• pp.129-135
• /
• 2016

CO oxidation was performed with Cu-Mn and Cu-Zn co-precipitated catalysts as differential precipitant, metal ratio and calcination temperature. The effects of differential metal mole ratio and calcination temperature in mixed metal oxide catalyst were investigated with CO oxidation reaction. Physiochemical properties were studied by XRD, $N_2$ sorption and SEM. 2Cu-1Mn with $Na_2CO_3$ catalyst calcined at $270^{\circ}C$ has a large surface area $43m^2/g$ and the best activity for CO oxidation. $Cu_{0.5}Mn_{2.5}O_4$ in XRD peak shows the lower activity than others. The catalytic activity over the catalyst calcined $270^{\circ}C$ displayed the highest conversion, and it was better activity comparing with Pt catalysts CO conversion.

• Korean Chemical Engineering Research
• /
• v.56 no.2
• /
• pp.191-203
• /
• 2018

This study was investigated the effect of the morphology change of copper (Cu) powders under the different rotational speed and milling time by using three kinds of grinding media with different size and materials, and performed DEM simulations of ball behavior. In order to clarify the mechanism of grinding by three - dimensional simulations of the ball behavior in a traditional ball mill, the force, kinetic energy, and medium velocity of the grinding media were calculated. In the simulation, the amount of change of the input energy was also calculated by adjusting the rotational speed, ball material, kinetic velocity, and friction coefficient in the same as the actual experimental conditions. The scanning electron microscope results show that the particle morphology changes from irregular to spherical when the ball size is small.

• Analytical Science and Technology
• /
• v.7 no.4
• /
• pp.483-492
• /
• 1994

Direct solid analysis of various kinds of metal samples has been conducted by glow discharge. In this laboratory, the gas-jet assisted glow discharge(GJGD) device has been developed and characterized. The effect of changes in applied current, cell pressure and flow rate on atomic emission signals obtained from a jet-assisted cathodic sputtering was investigate. The emission intensities of Cu, Zn, and Ar were measured. They were increased with the current. But the intensities were decreased by increasing the flow rate of argon due to the diffusion and transportation of particles into plasma. By increasing the pressure of the cell, the intensities were greatly decreased because of enhancement of redeposition onto the surface of the sample.

• Ecology and Resilient Infrastructure
• /
• v.6 no.1
• /
• pp.1-11
• /
• 2019

This study performed the impact of ecological waterway on fish community in a reach of the Dal River, Korea. Fish monitoring revealed that 9 fish species are dominant, namely Zacco platypus, Coreoleuciscus splendidus, Zacco koreanus, Pungtungia herzi, Acheilognathus yamatsutae, Rhinogobius brunneus, Tanakia signifer, Gobiobotia macrocephala, and Pseudopungtungia tenuicorpus, and account for 95% of the total fish community. The River2D model was used for the computation of the flow and the HSI model for the habitat simulation. The restoration of the waterway performed through the small dam removal, the formation of the pool-riffle structure, and the change of the bed elevation and width. Simulation results indicated that the restoration of the ecological waterway effects significantly increased by about 16% for the WUA (Weighted Usable Area) of the total fish community in optimal ecological flow conditions ($Q=7.0m^3/s$). The restoration of the ecological waterway is more advantageous to fish community.