• Korean Chemical Engineering Research
• /
• v.55 no.2
• /
• pp.156-162
• /
• 2017

CuO(x)/0.3Al-0.7Ce catalysts with different CuO loadings (x = 2~20 wt%) were prepared by impregnation method and investigated the effects of CuO loadings on the low temperature CO oxidation. Of the used catalysts, the CuO(10)/0.3Al-0.7Ce catalyst showed the highest catalytic performance in the absence or presence of water vapor. In the presence of water vapor, the catalytic performance was drastically decreased, with a temperature of 50% CO conversion ($T_{50%}$) shifted to higher temperature by $50^{\circ}C$ compared to the those in dry conditions because of the competitive adsorption of water vapor on the active sites. The copper metal surface area calculated from $N_2O$-titration analysis and the oxygen capacity from CO-pulse experiments were increased with the CuO loadings and showed a maximum at 10 wt%CuO/0.3Al-0.7Ce catalyst. These trends are in good agreement with the tendency of $T_{50%}$ of the catalysts. From these characteristic aspects, it could be deduced that the catalytic performance was closely related to the oxygen capacity and the copper metallic surface area.

• Korean Chemical Engineering Research
• /
• v.45 no.6
• /
• pp.633-637
• /
• 2007

Electroless plating of Co-alloy thin films as capping layers for Cu interconnection has been investigated using alkali-free precursors such as $(NH_4)_2Co(SO_4)_2{\cdot}6H_2O$, $(NH_4)_2WO_4$, $(NH_4)H_2PO_4$, etc. The characteristics of the Co-alloy thin films were discussed by analyses of the effects of pH, Co-precursor concentration, and deposition temperature on the thickness and surface morphology of the films. The thickness of the Co-alloy thin films increased with increasing pH, Co-precursor concentration, and deposition temperature, similarly to the results of electroless plating of Co-alloy thin films using alkali-containing chemicals. The SEM images of the surface of the Co-alloy thin films showed that the proper ranges of pH and deposition temperature were 8.5~9.5 and $75{\sim}85^{\circ}C$, respectively. This work found a feasibility that Co-alloy thin films as capping layers for Cu interconnection could be electroless plated using alkali-free chemicals.

• Nuclear Engineering and Technology
• /
• v.21 no.2
• /
• pp.111-122
• /
• 1989

With the Zircaloy-4 tube oxidized in high temperature (1323 K) steam for 5, 10, 30 and 60 minutes, the expanding copper mandrel test was carried out over a temperature range of 673-l173k at $\varepsilon\;=\;3.0\times10^5S\;^1$. The oxidation parameters $(K_i)$ in the present study were linearly proportional to square root of time $(Ki= \delta_{kit})$ and their rate constants ($\delta_{ki}$) are 0.281, 2.82, and 2.313 for weight gain and thickness of Zr02 and $\alpha$(0) layer, respectively. Activation energy for high temperature (873-1073k) plastic deformation of Zircaloy-4 increases from 251 KJ/mol to 323 KJ/mol with increase in oxidation time from 5 minutes to 60 minutes due to the high strengthened Zr02. With the oxide layer thickness [K ; expressed in "Equivalent Cladding Reacted" (ECR,%)] and the yield stress obtained from the mandrel test, an empirical relation was derived as ($\sigma/C)^n=K^mexp$ (Q/RT) with n=6.9, m=5.7, C=0.155, 0.138, 0.051, and 0.046 MPa for Q=251, 258, 316, 323 KJ/mol, respectively.

• Korean Journal of Food Science and Technology
• /
• v.38 no.2
• /
• pp.284-289
• /
• 2006

Effects of mulberry fruit extract (MFE) on the levels of serum mineral and serum oxidative stress markers on 31 middle-aged humans (16 males and 15 females) supplemented with MFE for 4 weeks were investigated. Contents of mineral per 100 g MFE were 80.66 (Ca), 12.26 (Mg), 6.26 (Fe), 0.05 (Cu), and 4.04 mg (Zn). Relative scavenging activities of MFE and its cyanidin-3-glucoside on 1,1-diphenyl-2-picrylhydrazyl (DPPH) were 34 and 85%, respectively, using ascorbic acid as standard. Anthropometry measurements, serum mineral (Ca, Mg, Fe, Cu, and Zn)levels, and serum oxidative stress markers were analyzed before and after supplementation of MFE. After supplementation of MFE, no significant differences were observed in anthropometry measurements and levels of serum thiobarbituric acid reactive substance (TBARS) in males and females, and ferric-reducing ability plasma (FRAP) in males, whereas serum mineral levels (Fe in males, and Fe, Cu, and Zn in females) and serum FRAP levels (both males and females) increased significantly.

• Journal of Conservation Science
• /
• v.28 no.4
• /
• pp.403-410
• /
• 2012

The brine treatment applied during the fabrication of forged high tin bronze objects is considered effective at the removal of surface oxide layers developed at elevated temperatures. There is not much information, however, available for the understanding of its exact effect and purpose. This work performed laboratory experiments to characterize the effect brine treatments produce on the surface of bronze objects during fabrication. Specimens were first made in the bronze shop of the Yongin folk village under varying conditions of brine treatments, and the results obtained were then used in the following laboratory experiments where the effect of brine treatments were investigated in terms of brine concentrations, alloy compositions and thermo-mechanical treatments. The results show that oxide layers generated at high temperature are easily removed by the brine treatment. It was found that the element, chlorine, played a key role in the removal of such oxide layers as opposed to the other constituent of the brine, sodium, makes no notable contribution. In bronze alloys containing 22% tin, this brine effect is obtained regardless of the application of forging as long as the brine concentration is over 0.5% based on weight. In alloys containing lead, however, no brine effect is observed due to the molten lead that emerges from inside the hot bronze specimen and forms a thin layer on its surface.

• Journal of Adhesion and Interface
• /
• v.20 no.1
• /
• pp.23-28
• /
• 2019

In this study, the micro- and nano-particles were used and their shapes were transferred into the polydimethylsiloxane (PDMS) film to fabricate the dry adhesives and their properties were investigated. The Cu nanoparticles of the sizes of 20 nm, 40 nm and 70 nm and the polymethylmethacrylate (PMMA) beads of the size of $5{\mu}m$ were used to transfer their images and the resultant properties of the dry adhesives were compared. The effects of particle size and materials on the mechanical property, tensile adhesion strength, light transmittance, surface morphology, water contact angle were studied. The dry adhesives obtained from the transfer process of Cu nanoparticles with the size of 20 nm resulted in the enhancement of tensile adhesion strength more than 300% compared to that of the bare PDMS. The formation of nanostructure of large surface area on the surface of the PDMS film by the Cu nanoparticles may responsible for the improvement. This study suggests that the use of nanoparticles during the fabrication of PDMS dry adhesives is easy and effective and could be applied to the fabrication of the medical patch.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.6
• /
• pp.708-714
• /
• 2016

In today's semiconductor industry, manufacturing technology is being developed for the purpose of processing large amounts of data and improving the speed of data processing. The packaging process in semiconductor manufacturing is utilized for the purpose of protecting the chips from the external environment and supplying electric power between the terminals. Nowadays, the WLP (Wafer-Level Packaging) process is mainly used in semiconductor manufacturing because of its high productivity. All of the silicon dies on the wafer are subjected to a high pressure and temperature during the molding process, so that die shift and warpage inevitably occur. This phenomenon deteriorates the positioning accuracy in the subsequent re-distribution layer (RDL) process. In this study, in order to minimize the die shift, a vision inspection system is developed to collect the die shift measurement data.

• Korean Journal of Food Science and Technology
• /
• v.29 no.1
• /
• pp.15-20
• /
• 1997

Changes in antioxidative substances-sesamol, sesamin and sesamolin - and mineral contents of sesame oil during refining processes have been studied to investigate the oxidative stability of oils during the storage at $70^{\circ}C$. Fe, Cu, Mg and Zn were nearly removed from the oil by the degumming process. During storage, the changes of total volatile contents in crude and degummed sesame oil were not noticeable but those in alkali-refined and deodorized sesame oil were increased at early period of the storage. The increases of hexanal and pentanal were most noticeable and their concentration was increased markedly in alkali-refined, bleached and deodorized sesame oil at early period of the storage. During refining processes and storage, sesamin was relatively stable but the content of sesamolin was decreased. The content of sesamol was decreased until alkali-refining process but increased during a bleaching process. The content of sesamolin tended to decrease with increasing of sesamol during storage.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.25 no.4
• /
• pp.687-694
• /
• 1996

Myrosinase was purified from Korean mustard seed(Brassica juncea) by a sequential process of DEAE-cellulose, concanavalin A-sepharose, and Superose 6 chromatography. The molecular weight of puri-fied myrosinase(II-2) determined by SDS-polyacrylamide electrophoresis was 67KD. About a 248-fold purification for myrosinase II-2 was obtained after Superose 6 chromatography. Optimum pH of the myrosinase was 7.0 and optimum temperature of the enzyme was $3^{\circ}C.$ The enzyme was stable at pH 7.0, and below $30^{\circ}C.$ Cu, Hg and Fe ion significantly inhibited the enzyme activity, but ascorbic acid enhanced, resulting in a maximum activity by 1mM ascorbic acid. Among tile ascorbic acid ana-logues, dehydroascorbic acid inhibited the enzyme activity, whereas others showed a little effect. Reducing agents such as 2-mercaptoethanol and dithiothreitol inhibited the enzyme activity, but the reducing agents with ascorbic acid was enhanced enzyme activity.

• Journal of Advanced Marine Engineering and Technology
• /
• v.35 no.1
• /
• pp.53-59
• /
• 2011

The using of diesel engine will be increased in the world for fuel economy. But diesel engine emits harmful emissions such as much NOx, smoke etc. In this study, experiments were performed to investigate the spray characteristics of diesel spray in a common-rail system according to fuel temperature, injection pressure, injection period and fuel viscosity etc. using a high speed video camera. Diesel oil has different spray patten due to injection pressure and injection period in a common-rail system. A Filter pressure was influenced by fuel temperature which was turned to fuel viscosity related to a fluid flowing. The effect of the bio-diesel fuel mixing ratio on the spray and atomization characteristics was also investigated at various experimental conditions. It shows that the droplet atomization characteristics of bio-diesel fuel showed deteriorated results as the mixing ratio of biodiesel increased because of the high viscosity.