• Tribology and Lubricants
• /
• 제39권4호
• /
• pp.123-132
• /
• 2023

In this study, the expansion, stress, and operating clearance of bearing elements during operation are observed using the inner/outer ring temperature test data of a 3.0×10⁶ DN-class roller bearing. The operating clearance characteristics of inner-/outer-ring cooling (IORC) bearings are compared to those of inner-ring cooling (IRC) bearings. For IRC bearings, the thermal expansion of the outer ring is the most important factor in clearance variation. As a result, the operating clearance is less than the initial clearance of 61 ㎛, and the operating clearance decreases to 0.5 ㎛ at 25,500 rpm. Conversely, the temperature of the outer ring of IORC bearings is lower than that of IRC bearings, so the operating clearance is kept smaller. When the coolant flow rate to the outer ring is approximately 1.5 to 2.0 L/min, the temperature difference between the inner and outer rings is minimized and the operating clearance is maintained at a significantly lower level than IRC bearings. Small operating clearances are expected to be effective in reducing cage slip and skid damage in roller bearings. The results and analysis procedures of this study can be utilized to design of bearing clearance, lubricant flow rate, and assembled interference in the early design stage of aerospace roller bearings.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 1996년도 제24회 추계학술대회
• /
• pp.207-212
• /
• 1996

The shotpeening treatment were conducted for improving the strength of rolling contact fatigue of machine element like a gear. This paper was undertaken to analyze the influence of shotpeening treatment for inner race of ball bearing on the roiling contact fatigue. Shotpeening treatment were applied to the full hardened and the carbonitrided bearing. And the rolling contact fatigue life test and X-ray diffraction test were carried out. The results of this study showed that the fatigue life of ball bearing in the clean and the contaminated oil could be improved by shotpeening treatment. This effect was found to be more pronounced to the full hardened bearing.

• Tribology and Lubricants
• /
• 제13권2호
• /
• pp.39-45
• /
• 1997

The shot peening treatment were conducted for improving the strength of rolling contact fatigue of machine element like a gear. This paper was undertaken to analyze the influence of shot peening treatment for inner race of ball bearing on the rolling contact fatigue. Shot peening treatment were applied to the full hardened and the carbonitrided bearing. And the rolling contact fatigue life test and X-ray diffraction test were carried out. The results of this study showed that the fatigue life of ball bearing in the clean and the contaminated oil could be improved by shot peening treatment. This effect was found to be more pronounced to the full hardened bearing. These facts might be due to the generation of compressive residual stress and the strain hardening of surface layer by shot peening treatment. The failure of the shot peened bearing were presumed to initiate at surface.

• 한국융합학회논문지
• /
• 제8권5호
• /
• pp.179-184
• /
• 2017

테이퍼 롤러 베어링은 중량이 큰 승합차, 화물차, 열차에 사용되며, 큰 부하하중에서도 안정적으로 차량을 지지할 수 있다. 테이퍼 롤러 베어링 부품 중 케이지는 롤러 간 간격을 유지해 주며, 이를 통해서 마찰 방지 및 마모, 발열의 억제 등의 역할을 한다. 공진으로 인해 케이지가 심하게 변형되면 롤러가 구름을 하지 못하거나, 케이지를 이탈하는 경우가 발생하게 된다. 케이지는 경량화 추세에 따라 금속소재에서 플라스틱소재로 변화하고 있다. 본 논문에서는 "화물열차와 고속열차에 사용되는 테이퍼 롤러 베어링의 부품 중 하나인 케이지를 대상으로 연구하였으며" 케이지 재료에 따른 동특성 해석과 열차가 최고속도로 주행한다는 가정 하에, 최고속도에 해당하는 주파수의 고조파를 계산하고 공진범위를 피하기 위해 케이지의 설계 변수 중 가변이 쉬운 두께를 다르게 하여, 최적의 두께를 선정하고자 비교해석을 진행하였다. 재료에 따른 동특성 해석과 비교해석은 Abaqus 6.16을 사용하였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.426-429
• /
• 2005

In this study, the formed tool is used to machine of bearing raceway and a shape compensation scheme is proposed to compensate for shape of it in turning process. It is introduced the conventional design method of the formed tool; a simple depth compensation method and a drawing compensation method. And it is performed to investigate in detail properties of the formed tool about a tool angle and problems of a turning process of bearing raceway using the formed tool. The applicability of the proposed scheme is examined by comparing the experimental results obtained by a new designed formed tool with those obtained by a conventional tool.

• Tribology and Lubricants
• /
• 제29권4호
• /
• pp.218-222
• /
• 2013

Water-lubricated ball bearings consist of rolling elements, an inner raceway, an outer raceway, a retainer, and an operating lubricant. In the water environment, ball bearings are required to sustain high loads at high speeds under poorly lubricated conditions. For the analysis of bearing behavior, friction torque is considered as the main factor at various flow rates, rotating speeds, and roughnesses between the rolling element and raceways. When the bearing operates at high rotating speeds, the friction torque between the raceway and rolling elements increases considerably. This frictional torque is an important factor affecting bearing reliability and life cycle duration. For understanding the flow conditions in the inner part of the bearing, this study focuses on the flow around the rotating and revolving rolling elements. A simple model of fluid flow inside the ball bearing is designed using the commercial CFD program ANSYS.

• 한국정밀공학회지
• /
• 제14권8호
• /
• pp.92-100
• /
• 1997

An upper-bound elemental technique (UBET) analysis is carried out to improve the material flow and to reduce the load of bearing-race forming process. The UBET analysis, which adapts the advantages of stream function and finite element method, is useful for predicting the profile of complex geometric bound- ary. From the UBET analysis, the forming load, the velocity distribution and the stream line of the deformed billet are determined by minimizing the total power consumption with respect to chosen parameters. The results of present UBET analysis are better than those of previous UBET analysis. Experiments have been carried out with model material plasticine billets at room temperature. The theoretical predictions for forming load and flow pattern(stream line) are in good agreement with the experimental results.

• 소성∙가공
• /
• 제12권2호
• /
• pp.83-87
• /
• 2003

Current state of plastic processes of steel bearing parts is surveyed. According to the advances in plastic forming technologies and their great advantage to mass production, plastic processes are adopted in manufacturing majority of bering parts. The rings are forged or ring rolled and the rolling elements, i.e, balls or rollers are cold formed before fine machining. Bearing's steel retainers are mainly press formed using cold rolled seel strips. Including the general explanation about above processes, some details of forging technology, control of forging temperature and after cooling process, and examples of computer simulation are described.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 춘계학술대회 논문요약집
• /
• pp.318-318
• /
• 2004

원통 연삭기(cylindrical grinding machine)는 원통형 공작물을 센터나 척으로 지지하면서 연삭 공정을 수행하기 때문에 연속적인 작업이 어렵지만, 무심 연삭기(centerless grinding machine)는 원통형 공작물을 받침판으로 지지하면서 연삭 숫돌(grinding wheel)과 조정 숫돌(regulating wheel)로 연삭 공정과 축방향 이송을 동시에 수행하기 때문에 연속적인 작업이 가능하다. 특히 고정밀 부품을 작업자의 숙련도와 무관하게 고능률적으로 가공할 수 있는 무심 연삭기는 구름 베어링, 축, 피스톤 핀 등과 같은 고정밀 기계류 부품들을 대량 연삭하기 위한 용도로 많이 사용되어 왔다.(중략)

• 한국산학기술학회논문지
• /
• 제20권4호
• /
• pp.464-469
• /
• 2019

테이퍼 롤러 베어링은 큰 부하 하중이 가해져도 안정적으로 차량을 지지할 수 있어서 승합차, 화물차, 열차 등에 핵심적인 구동 부품으로 광범위하게 사용된다. 테이퍼 롤러 베어링 부품 중에서 케이지는 롤러들 사이의 간격을 유지해 주며, 이를 통해서 마찰 방지 및 마모, 발열을 억제하고 윤활을 위한 공간을 제공해주는 등의 역할을 한다. 차량이 주행 중에 공진으로 인해 케이지가 심하게 변형되면 롤러가 원활한 구름 운동을 하지 못하거나, 케이지를 이탈하는 경우가 발생하게 된다. 따라서 베어링의 안정적인 내구성능을 확보하기 위해서는 케이지의 공진주파수를 파악하는 것이 매우 중요하다. 베어링 케이지는 구조적으로 동일한 형상이 반복되는 주기적 구조물로 볼 수 있는데, 이러한 구조물은 제작과정에서 설계 시 의도한 완벽한 기하학적 형상과는 어느 정도의 오차를 가진 형상으로 제작되게 된다. 본 연구에서는 이러한 케이지의 기하학적 불완전성이 동특성에 미치는 영향을 파악하고자 한다. 그 결과 기하학적인 불완전성에 의하여 이상적인 케이지의 고유진동수 부근에서 고유진동수 분리가 발생하며, 그 간격은 기하학적 오차의 크기에 비례하고 모드의 차수가 증가할수록 그 간격도 넓어진다고 판단된다.