• Proceedings of the KAIS Fall Conference
• /
• 2004.06a
• /
• pp.321-323
• /
• 2004

자연의 세계에서 나뭇잎, 돌기물, 구름, 해안선, 곤충의 모습 등에 내재하고 있는 아름다움은 흔히 균형성, 대칭성, 다양성 등으로부터 비롯된다. 자연 현상은 복소수를 활용하여 극좌표 표현으로 묘사되는 경우가 많다. 본 논문에서는 1989년 Temple H. Fay가 Amer. Math. Monthly 96(5)호에서 발표한 나비곡선 $r=e^{cos{\theta}}-2cos4{\theta}+sin^5(\frac{\theta}{12})$의 기하학적 성질을 분석하고, 수학전문 소프트웨어인 매스매티카를 활용하여 나비곡선의 작도하고자 한다.

• The Journal of the Korea Contents Association
• /
• v.6 no.5
• /
• pp.42-55
• /
• 2006

In most multimedia systems, the environment is considered as a passive background. In virtual environment simulating real world, however, terrain affects many events such as wind, rain, cloud. Therefore, it is necessary to model terrain and meteorological phenomenon in order to simulate realistic virtual environment. In those modeling, not only height and location information but also environmental factors such as temperature and humidity are important. An event is composed of many activities and subevents based on causality and consists of precondition , procedure and effects. Each part of an event is formulated in terms of a number of parameter variables, which correspond to its associated factors on existence or states of entities and relation. This paper represents terrain and environmental factor using contour map. Moreover, we define various events and their procedures in terms of causality in virtual environment.

• The Bulletin of The Korean Astronomical Society
• /
• v.35 no.1
• /
• pp.89.2-89.2
• /
• 2010

우리는 목성의 emission과 absorption 스펙트럼에 영향을 미치는 인자를 알아보고 목성의 대기구조를 연구하기 위하여 2006년 4월 18일부터 8월22일 사이 중 7일간 United Kingdom Infrared Telescope(UKIRT)의 고분산분광기 CGS4(R=37,000)를 이용하여 관측한 목성의 $2.86-3.53{\mu}m$ 분광관측 자료를 분석하였다. 관측자료의 분석에는 $CH_4,\;CH_3D,\;NH_3,\;C_2H_2,\;C_2H_6,\;PH_3$, HCN의 분광선 뿐만 아니라 구름과 Haze의 영향도 포함하는 대기모델을 사용하였다. 대부분의 관측된 분광선은 모델링을 통하여 얻은 synthetic spectrum과 일치하였으나 3.00 에서 $3.10{\mu}m$사이에서 일치하지 않는 다섯 개의 미확인 분광선을 발견하였다. 이들은 각각 $3.003{\mu}m$ 근처와 3.0505, 3.0735, $3.0865{\mu}m$ 그리고 $3.0935{\mu}m$에서 나타나며, 미확인 분광선들이 Seo et al.(2007)이 언급한 태양의 적외선 흡수선에 의해서 나타나는 분광선이 아님을 보였다. 우리는 이 미확인 분광선들을 설명할 수 있는 가능한 분자들을 제시 하고자 한다.

• Journal of Korean Society for Geospatial Information Science
• /
• v.18 no.4
• /
• pp.79-86
• /
• 2010

This research is a thing about reverse operation about the solar power for location decision and increasing efficiency of the solar power generation equipments. The purpose of this research is reverse operation about the amount of sunshine using the climate and spatial elements. Following the result of correlation analysis, the wind-speed and cloud-amount factor are excluded, because the correlation and significance coefficients are out of value. Each outcome of regression analysis using the other four climate elements, and regression analysis using spatial elements is what the amount of sunshine and the solar altitude are the most influence to the insolation-modeling. Doing the regression analysis based on the precedent result make the result that climate elements have bigger coefficient of regression than spatial elements. This outcome means the climate elements are more influence than spatial elements.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.6
• /
• pp.102-109
• /
• 2014

A particle system is used for modeling the physical phenomenon. There are many traditional ways for simulation modeling which can be well suited for application including the landscapes of branches, clouds, waves, fog, rain, snow and fireworks in the three-dimensional space. In this paper, we present a new fireworks modeling technique for modeling 3D firework based on Firework Particle Tracking (FPT) using the particle system. Our method can track and recognize the launched and exploded particle of fireworks, and extracts relatively accurate 3D positions of the particles using 3D depth values. It can realize 3D simulation by using tracking information such as position, speed, color and life time of the firework particle. We exploit Region of Interest (ROI) for fast particle extraction and the prevention of false particle extraction caused by noise. Moreover, Kalman filter is used to enhance the robustness in launch step. We propose a new fireworks particle tracking method for the efficient tracking of particles by considering maximum moving range and moving direction of particles, and shall show that the 3D speeds of particles can be obtained by finding the rotation angles of fireworks. Also, we carry out the performance evaluation of particle tracking: tracking speed and accuracy for tracking, classification, rotation angle respectively with respect to four types of fireworks: sphere, circle, chrysanthemum and heart.

• Journal of the Korean Society for Precision Engineering
• /
• v.32 no.5
• /
• pp.423-429
• /
• 2015

Linear motion (LM) ball guides have good accuracy and high efficiency. They are widely applied for precision machinery such as machine tools, semiconductor fabrication machines and robots. However, friction force incurs heat between the balls and grooves. Thermal expansion due to the heat deteriorates stiffness and accuracy of the LM ball guides. For accurate estimation of stiffness and accuracy during the linear motion, friction models of LM ball guides are required. To formulate accurate frictional models of LM ball guides according to load and preload conditions, rolling and viscous frictional analyses have been performed in this paper. Contact loads between balls and grooves are derived from Hertzian contact analysis. Contact angle variation is incorporated for the precision modeling. Viscous friction model is formulated from the shear stress of lubricant and the contact area between balls and grooves. Experiments confirm validity of the developed friction model for various external load and feedrate conditions.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.8 no.3
• /
• pp.96-106
• /
• 2005

The ability of remote sensing and GIS technique, which used to provide valuable informations in the time and space domain, has been known to be very useful in providing permanent records by mapping and monitoring flooded area. In 2000, floods were at the worst stage of devastation in Tonle Sap Lake, Mekong River Basin, for the second time in records during July and October. In this study, Landsat ETM+ and RADARSAT imagery were used to obtain the basic information on computation of the inundation area and volume using ISODATA classifier and segmentation technique. However, the extracted inundatton area showed only a small fraction than the actually inundated area because of clouds in the imagery and complex ground conditions. To overcome these limitations, the cost-distance method of GIS was used to estimate the inundated area at the peak level by integrating the inundated area from satellite imagery in corporation with digital elevation model (DEM). The estimated inundation area was simply converted with the inundation volume using GIS. The inundation volume was compared with the volume based on hydraulic modeling with MIKE 11. which is the most poppular among the dynamic river modeling system. The method is suitable for estimating inundation volume even when Landsat ETM+ has many clouds in the imagery.

• Journal of the Korean earth science society
• /
• v.32 no.3
• /
• pp.276-293
• /
• 2011

In this study a modeling system consisting of Weather Research and Forecasting (WRF), Sparse Matrix Operator Kernel Emissions (SMOKE), the Community Multiscale Air Quality (CMAQ) model, and the CMAQ-Model of Aerosol Dynamics, Reaction, Ionization, and Dissolution (MADRID) model has been applied to estimate enhancements of $PM_{10}$ during Asian dust events in Korea. In particular, 5 experimental formulas were applied to the WRF-SMOKE-CMAQ (MADRID) model to estimate Asian dust emissions from source locations for major Asian dust events in China and Mongolia: the US Environmental Protection Agency (EPA) model, the Goddard Global Ozone Chemistry Aerosol Radiation and Transport (GOCART) model, and the Dust Entrainment and Deposition (DEAD) model, as well as formulas by Park and In (2003), and Wang et al. (2000). According to the weather map, backward trajectory and satellite image analyses, Asian dust is generated by a strong downwind associated with the upper trough from a stagnation wave due to development of the upper jet stream, and transport of Asian dust to Korea shows up behind a surface front related to the cut-off low (known as comma type cloud) in satellite images. In the WRF-SMOKE-CMAQ modeling to estimate the PM10 concentration, Wang et al.'s experimental formula was depicted well in the temporal and spatial distribution of Asian dusts, and the GOCART model was low in mean bias errors and root mean square errors. Also, in the vertical profile analysis of Asian dusts using Wang et al's experimental formula, strong Asian dust with a concentration of more than $800\;{\mu}g/m^3$ for the period of March 31 to April 1, 2007 was transported under the boundary layer (about 1 km high), and weak Asian dust with a concentration of less than $400\;{\mu}g/m^3$ for the period of 16-17 March 2009 was transported above the boundary layer (about 1-3 km high). Furthermore, the difference between the CMAQ model and the CMAQ-MADRID model for the period of March 31 to April 1, 2007, in terms of PM10 concentration, was seen to be large in the East Asia area: the CMAQ-MADRID model showed the concentration to be about $25\;{\mu}g/m^3$ higher than the CMAQ model. In addition, the $PM_{10}$ concentration removed by the cloud liquid phase mechanism within the CMAQ-MADRID model was shown in the maximum $15\;{\mu}g/m^3$ in the Eastern Asia area.

• Journal of the Korea Computer Graphics Society
• /
• v.2 no.1
• /
• pp.7-14
• /
• 1996

A particle system is defined as a collection of primitive particles that together represent irregular and ever-changing objects such as smoke, clouds, waterfalls, and explosions. A particle system can be a powerful tool for modeling a deformable object's motion and change of form since it has dynamic properties with time. As an object becomes more complicated and shows more chaotic behavior, however, we need much more parameters for describing its characteristics completely. Consequently, the conventional particle system leads to difficulty in managing all of the parameters properly since one parameter can affect the others. Moreover, motion equations for representing particles' behavior are usually approximated to gain speed-ups. The inevitable errors in calculating the equations can cause an unexpected outcome. In this paper, we present a new approach of applying fuzzy contol to mage particles' motion and attributes changes over time. We also give an implementation result of a fuzzy particle system to show the feasibility of the proposed method. Applications of the system to explosions, nebulae, volcanos, and grass are presented.

• Journal of Korean Society for Geospatial Information Science
• /
• v.14 no.4 s.38
• /
• pp.61-70
• /
• 2006

This paper presents photogrammetric processing to generate digital elevation models using SPOT-5 HRG stereo images and deals with the accuracy potential of HRG (High Resolution Geometry) supermode imagery for DEM generation. After bundle adjustment was preformed for sensor modelling, digital surface models were generated through the procedures of Epipolar image resampling and image matching. The DEM extracted from HRG imagery was compared along several test sections with the the refernce DEM which was obtained from the digital topographic maps of a scale of 1 to 5000. The ratio of the zone with DEM errors less than 5m to the whole zone was 53.8%, and about 2.5m RMSE was showed when assuming that the zones larger than 5m were affected by clouds, water bodies and buildings and excluding those zones from accuracy evaluation. In addition, the three-dimensional bird's eye view model and 3D building model were producted based on the DSM which was extracted from SPOT-5 HRG data.