• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.8 no.6
• /
• pp.13-22
• /
• 2009

Recently, DSRC technology is used in the various fields such as parking system, BIS, ETC, etc. This paper suggests a traffic information system using this DSRC technology. The traffic information processing based on point detection using existing vehicle detection equipment is the system in which a collection and a service are operated separately while the traffic information system based on the link detection using DSRC is able to collect and provide the traffic information through the communication between RSE and OBU. The speed of a traffic congestion is high on the process converted from a point passing speed to a link average speed because the vehicle detection equipment makes the link traffic information into the point information. When the condition of traffic is deteriorated, traffic speed of the vehicle detection equipment becomes higher than DSRC. Especially, in this system, deflection by data of the traffic speed of the traffic information system is much decreased, and the unexpected condition detection and traffic condition are provided promptly.

• 한국ITS학회:학술대회논문집
• /
• v.2006 no.10
• /
• pp.50-55
• /
• 2006

• Journal of the Korean Society for Railway
• /
• v.15 no.6
• /
• pp.604-608
• /
• 2012

Traditionally, the track circuits have been used for the purpose of train locating. However, the recent train control systems like a CBTC(Communications Based Train Control) do not utilize the track circuits to minimize the amount of ground signal devices. Therefore, there are increasing concerns over the system that can locate the position of train exactly without using the track circuits. Then, the contactless locating methods are added to ensure safety when the shunting sensitivity of the track circuit becomes low for the existing sections equipped with the track circuits. In this paper, a prototype of train locating device has been designed and tested, which utilizes the current phase difference upon magnetic field variation. The results show improved features of this method over the conventional track circuits method.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.1 no.1
• /
• pp.22-32
• /
• 2002

This paper describes about non-burial AVI (Automatic Vehicle Identification) system using general vehicle as probe car for obtaining more accurate traffic information while conserving road pavement surface. Existing spot traffic detectors have their own limits of not obtaining right information owing to its mathematical method. Burial AVI systems have some defects, causing traffic jam, needing much maintenance cost because of frequent cutting of loop and piezo-electric sensors. Especially, they have hard time to make right detection, when it comes to jamming time. Therefore, in this paper, we propose non-burial AVI system with laser trigger unit. Proposed non-burial AVI system is developed to obtain regional traffic information from normal Passing vehicle by automatic license number recognition technology. We have adapted it to national highway section between Suwon city and Pyong$\~$Taek city(9.5km) and get affirmative results. Vehicle detection rate of laser trigger unit is more than 95$\%$, vehicle recognition rate is 87.8$\%$ and vehicle matching rate is about 14.3$\%$. So we regard these as satisfying results to use the system for traffic information service. We evaluate proposed AVI system by regulation of some institutions which are using similar AVI system and the proposed system satisfies all conditions. For future study, we have plan of detailed research about proper lane number from all of the target lanes, optimal section length, information service period, and data fusion method for existing spot detector.

• Proceedings of the Korea Society for Simulation Conference
• /
• 1998.03a
• /
• pp.56-60
• /
• 1998

유고 감지 시스템은 검지기로부터 얻은 데이터를 분석하여 특정 구간의 유고 발생 여부를 판단하는 시스템으로 교통 관제의 측면에서 매우 중요한 역할을 한다. 본 논문에서는 속도, 밀도 그리고 교통량의 변화와 같은 다양한 유고 감지 변수를 어떻게 퍼지 시스템에 사용하는가를 보여주고 기존의 알고리즘이 안고 있던 문제점들을 해결하기 위한 퍼지 유고 감지 알고리즘을 제안한다. 또한 시뮬레이션을 통해서 제안된 퍼지 유고 알고리즘의 성능을 평가한다.

• Journal of Korean Society of Transportation
• /
• v.20 no.3
• /
• pp.55-67
• /
• 2002

구간검지체계를 기반으로 한 첨단교통정보제공시스템(Advanced Traveler Information Systems)은 그 기능 수행시 다음의 중요 고려사항을 지닌다. 첫째는 제공 정보의 신뢰성이며, 둘째는 정보수집비용에 관련한 수집자료수의 한계이다. 본 논문에서는 이러한 한계성 극복을 위해 보다 대표성 있는 교통정보 형태의 설정 및 통계적으로 신뢰성 있는 정보산출을 위해 요구되는 적정표본수의 결정에 대한 연구를 수행하였다. 도시고속도로(올림픽대로)와 도시간선도로(천호대로)의 실측 구간통행시간분포 분석결과 단일교차로 구간의 경우 다른 구간들의 단일봉(unimodal)의 정규분포형태와는 다른 두 개의 봉우리를 지닌 분포형태(bimodal)가 나타났다. 따라서 이러한 구간은 기존과는 다른 새로운 교통정보 형태가 필요하며, 본 논문에서는 모든 통과차량들의 평균통행시간으로 정의되는 한 개의 대표치가 아닌 신호주기에 의한 정지여부에 따라 분리되는 주행시간과 지체시간 또는 주행속도와 통행속도 개념의 세분화된 정보형태를 설정하였다. 또한 중심극한정리를 기초로 한 통계적인 표본수 결정식을 이용하여 설정된 신뢰수준 하에서의 정보산출을 위해 요구되는 적정 표본수를 산출하였다. 그 결과, 교통이 혼잡할수록 요구되는 표본수는 적어지는 것으로 나타났다. 우선 적정 표본수 만큼의 표본추출을 하고 제안된 정보산출 방법에 의해 교통정보를 산출한 후 실측치와의 오차를 비교하였다. 그 결과 산출된 교통정보는 신뢰수준 95%와 허용오차 5㎞/h를 만족하였다. 다음으로 구간검지체계를 이용하여 정보를 산출하는 타시스템 교통정보와의 오차율을 비교하였다. 그 결과, 실측치와 본 연구의 산출방법에 의한 교통정보, 로티스교통정보 및 차량번호판 인식시스템의 교통정보와의 비교 결과 제안된 교통정보형태의 타당성을 볼 수 있었다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.05a
• /
• pp.564-566
• /
• 2015

Red traffic light indicates a different meaning, the green one. Motorists and pedestrians in the crosswalk must stop or move in accordance with a signal light. However, the probability of an accident is high if you do not see or ignore these signals. In addition to the curved pedestrian crossing installed the announcement system using an infrared sensor is difficult. In this paper, we design and implement methods of detecting pedestrians using the camera. A camera installed on the pontoon walking up the pedestrian and the pedestrian detection range is set through the image. With the proposed system it is effective in detecting pedestrians in the crosswalk curved.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.9
• /
• pp.6214-6220
• /
• 2015

A track circuit has used stably more than 100 years for detecting train position, but solution of track circuit sort circuit incapacity due to a rust is necessary for side line in station yard, coast line and level crossing for conventional line in rural line. Domestically, Axle Counter System(ACS) has partially used for Hot Box System for high speed line and turnout for CBTC system. In contrast, most of countries has used ACS not only trunk line but also rural line and its application has increased for metro, electric car and industrial railway. In this paper, we has verified the operating status of ACS which installed with existing track circuit through log analsis to implement pilot application in mail track and turnout in station yard. And interface test with interlocking system has conducted at Obong shunting yard, as well as Cheongju station and has analyzed test result. Based on a test result, we made fail safe design, manufacturing skill and established system requirement specification for the smooth operation and maintenance.

• The KIPS Transactions:PartB
• /
• v.18B no.4
• /
• pp.201-212
• /
• 2011

In this paper, we suggest a system of detecting a vehicle with lane violation, which can detect the vehicle with lane violation, by using the feature point tracking. The whole algorism in the suggested system of detecting a vehicle with lane violation is composed of three stages such as feature extraction, register and tracking in feature for the tracking-targeted vehicle, and detecting a vehicle with lane violation. The feature is extracted from the morphological gradient image, which results in constructing robust detection system against shadows, weather conditions, head lights and illumination conditions without distinction day and night. The system shows excellent performance for the data captured at day time, night time, and rainy night time as much as 99.49% for positive recognition ratio and 0.51% for error ratio. Also the system is so fast as much as 91.34 frames per second in average that it may be possible for real-time processing.

• Information and Communications Magazine
• /
• v.32 no.12
• /
• pp.32-37
• /
• 2015

본 글에서는 철도교통의 안전성 향상을 위해 철도건널목의 지장물을 검지하는 기술을 소개한다. 철도건널목에 자동차나 보행자 등 열차운행에 지장을 줄 수 있는 물체가 존재하는지 확인하기 위하여 현재 레이저빔 방식의 검지장치를 사용하고 있으나 기술적 한계와 문제점을 보이고 있다. 이를 극복하기 위해 2차원 레이저스캐너 센서를 적용하여 새로운 지장물 검지 시스템을 설계하였으며, 관심구간에 존재하는 물체의 크기와 방향을 검지하는 알고리즘을 탑재하여 효과적인 지장물 인식이 가능하도록 하였다. 제작한 시작품을 실제 운영노선에 설치하여 현장시험을 수행하였다. 본 글에서는 개발된 기술을 설명하고 현장시험 결과를 소개하고자 한다.