• Journal of the Korean Wood Science and Technology
• /
• v.27 no.3
• /
• pp.39-50
• /
• 1999

This research was carried out to investigate the development of fire-retardancy treatment technology and performance evaluation of fire-retardant treated plywoods. Radiata pine, keruing, dillenia, calophyllum and terminalia veneers were treated by normal(conventional) pressure soak(NPS) and vacuum-pressure-soak(VPS) using 20% water solution of diammonium phosphate. Then, 4.8mm thick, 3ply plywoods were fabricated with combination of fire-retardant treated, untreated or water-immersion types and several composition types of radiata pine and keruing veneers, i,e. the uniform and the mixed types in species composition, and the homogenious and the alternate layer types in veneer treatment. In composed species, the retention and the treatment effects of fire-retardant chemicals III radiata pine was still greater than those of keruing. The effect of VPS treatment was larger than that of NPS treatment, however, adhesive bonding strength and bending strength of plywoods treated by these two methods were not necessarily lowered, compared to those of untreated plywood. And also, fire endurance performance of the urea melamine resin-bonded plywood was greater than that of the phenol resin-bonded plywood. In result, the appropriate combination in veneer species and layer as well as alternate fire-retardant treatments would be more efficiently available in service.

• Korean journal of applied entomology
• /
• v.16 no.4 s.33
• /
• pp.211-215
• /
• 1977

The Sporulation of Didymella bryomiae were observed under diurnal cycles of light/darkness of near ultraviolet light (NUV) and artificial daylight (ADL) and continous darkness in eight isolates growing on PDA and V-8 juice agar. Light stimulated pycindial and perithecial formation of this fungus on potato dextrose agar and V-8 juice agar. Sprulation was poor in darkness, but some isolates were able to produce pycnidia and perithecia in the absence of light. Perithecial formation was much better under artificial daylight (ADL) on V-8 juice agar than those grown under near ultraviolet light (NUV). In general, cultures grown on V-8 juice agar sporulated better than cultures grown on PDA under three setsof light condition. Most of the pycnidiospores obtained from each isolates of this fungus grown on PDA were non-septate and microtype, but macrotype of non-septate and uniseptate pycnidiospores were produced on V-8 juice agar. Pycnidiospore produced on V-8 juice agar were similar to those produced on the radicle of naturally infected seeds. The appearance of perithecia were quite distinctive from pycnidia. The mature perithecia were darker than pycnidia and whitish spore masses formed on the ostiole of perithecia.

• The Transactions of the Korea Information Processing Society
• /
• v.6 no.6
• /
• pp.1581-1589
• /
• 1999

In B-ISDN(Broadband Integrated Services Digital Networks), the efficient implementation of multicast function is very important since the demand for distributed type of service such as VOD(Video On Demand) system is expected to grow. In this paper, the multicast performance characteristics of fully-interconnected switch fabric used for our research is the proper architecture for a small-sized switch element, and it uses bit addressing method for addressing scheme and thus it is easy to implement multicast function without adding a function block. To incorporate the bursty nature of traffic in ATM networks, we used IBP(Interrupted Bernoulli Process) model as an input traffic model. We presented and analyzed the simulation results in terms of the multicast operation of the switch. Based. on this study, it its analyzed that congestion avoidance may be feasible if we use a proper traffic control scheme by finding an overload point due to multicast.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.19 no.2
• /
• pp.19-24
• /
• 2019

Digital technologies in the digital image field are developing and changing rapidly while creating various forms of media environments. In particular, broadcasting image-processing technologies provide more realistic images through the development of multimedia technology. Consequently, the needs of flat image quality have been nearly met, leading to technological saturation. Currently, flat images possess the advantages of popularity and freedom from visual fatigue over three-dimensional stereoscopic images. A complementary technology for flat images is the stereoscopic perception improvement technology. To examine correlations between stereoscopic perception and colour attributes for graphic images on flat displays, we have conducted experiments related to stereoscopic perception and analysed the results. In these experiments, the colour attributes of hue, value, and chroma were applied at different levels. Next, the factors that provide the highest stereoscopic perception and their interactions were analysed through analysis of variance. Finally, this study defines the significance of colour factors related to stereoscopic perception by analysing the experimental results, and proposes a colour adjustment method for improved stereoscopic perception in graphics image processing.

• Journal of the Korean Wood Science and Technology
• /
• v.46 no.1
• /
• pp.73-84
• /
• 2018

Recently, the importance of flame retardation treatment technology has been emphasized due to the increase in urban fire accidents and fire damage incidents caused by building exterior materials. Particularly, in the utilization of wood-based building materials, the flame retarding treatment technology is more importantly evaluated. An Intumescent system is one of the non-halogen flame retardant treatment technologies and is a system that realizes flame retardancy through foaming and carbonization layer formation. To apply the Intumescent system, composite material was prepared by using Ethylene vinyl acetate (EVA) as a matrix. To enhance the flame retardant properties of the Intumescent system, a nano-clay was applied together. Composite materials with Intumescent system and nano - clay technology were processed into sheet - like test specimens, and then a new structure of cross laminated timber with improved flame retardant properties was fabricated. In the evaluation of combustion characteristics of composite materials using Intumescent system, it was confirmed that the maximum heat emission was reduced efficiently. Depending on the structure attached to the surface, the CLT had two stages of combustion. Also, it was confirmed that the maximum calorific value decreased significantly during the deep burning process. These characteristics are expected to have a delayed combustion diffusion effect in the combustion process of CLT. In order to improve the performance, the flame retardation treatment technique for the surface veneer and the optimization technique of the application of the composite material are required. It is expected that it will be possible to develop a CLT structure with improved fire characteristics.

• Journal of agriculture & life science
• /
• v.53 no.3
• /
• pp.27-39
• /
• 2019

The purpose of this study was to investigate the effect of hot water treatment and pH corrected lime sulfur combination treatment on the fungicidal and bacterial disinfection effects and germination rate of organic lettuce seeds. Among the followers, Alternaria sp. was infected 53.3% and Aspergillus sp. and Cladosporium sp. Infected 14.5% and 5.4%, respectively. Bacteria were isolated only Pseudomonas sp., and infected with 16.5%. In order to investigate the effect of disinfection on the temperature of hot water (45℃, 50℃, 55℃ and 60℃). The seed germination rate sharply decreased with increasing temperature and treatment time. The germination effect and germination rate of the follower were highest when hot water treatment was carried out for 20 minutes in hot water at 50℃. In the case of combined treatment of 50℃ hot water for 10 min and 0.4% pH adjusted lime sulfur mixture, showed the highest sterilization effect and germination rate with 100% and 97.6%, respectively. The results of this study can contribute to the development of technology to sterilize not only seed surface but also fungi and bacteria inside of seed.

• Journal of Sericultural and Entomological Science
• /
• v.14 no.2
• /
• pp.81-92
• /
• 1972

Studies on Pathogenicity of Nosema bombycis Naegeli are summarized as follows: 1. The mortality of the parents, Jam 103 and Jam 104, is remarkbly higher than that of the hybrid, Jam 103$\times$Jam 104, whereas there is no difference in the mortality between the parents. 3. In the mortality of the pathogen-concentration, it is increased in order of the following concentrations inoculated, 10$^{8}$ , 10$^{7}$ , 10$^{8}$ and 10$^{5}$ /ml. 3. In the mortality of each instar, it is high in order of 5th, 4th, 3rd, and 2nd instar. 4. In the interaction between the mortalities of the varieties and the concentrations, 1) The mortality shows no differences between the parents and the hybrid in the high concentration of 10$^{8}$ /ml. 2) The mortality of the hybrid is lower than that of the parents in the low concentration of 10$^{5}$ /ml, whereas no difference is found between the parents. 3) The interaction appears at the same level in the middle concentration of 10$^{6}$ /ml to the parents and of 10$^{7}$ /ml to the hybrid. 5. It was pointed out that active immunity depends upon the volume of antigen injection, immunizing period, and injection intervals. In this experiment, it is noticed that the optimum volume of injection is above 20ml and D is the best one of the four treatment (A.B.C.D.). 6. The immune sera indicate such a 12,800 high titer in the indirect method can be obtained from the D immunizing method. Silkworm tissues and N. bombycis spores show self-fluorescence, but it is able to distinguish it from the F.I.T.C. by using the U.V. filter. 7. The midgut epithelium is examined to be the first site of the tissues which are penetrated into and multiplied by the inoculation of the pathogen per os.

• Economic and Environmental Geology
• /
• v.53 no.1
• /
• pp.87-98
• /
• 2020

The bird track fossil site in Haman Formation is divided into seven sedimental layers by the sedimentary structures, lithofacies and sequences. The bird tracks top on the highest layer, which includes ripple marks and suncracks. The layer has lithofacies with reddish grey siltstone and dark grey mudstone, alternately. As an analysis for the same rocks of the fossil site, physical properties show on mean values for 0.62% of absorption rate, 1.64% of porosity and 2.63 of specific gravity. Rock-forming minerals composed mainly of plagioclase, quartz, calcite, chlorite and mica. Meanwhile, we executed an experiments based on the petrography and weatherings to find a proper consolidants. In the experiments, the OH 100 reagent proved stable aspect and the lowest transition rate in terms of weight and chromaticity. Also, it showed the highest increase in ultrasonic velocity, improving the physical properties of the rocks. In the case of applying the OH 100 with antihygro, an swelling inhibitors on the sedimentary rocks, the chromaticity indicated an stable transition aspect. When it comes to the physical properties, the antihygro also decreases the porosity effectively. Thus, the most proper method for the fossil site of Haman Formation is to apply antihygro and OH 100 reagents since the rocks includes clay minerals that show swelling characteristics. However, this result is deduced from an indoor application experiments, leaving the necessity of verification how these reagents would affect the bird tracks site under the field condition.

• Science of Emotion and Sensibility
• /
• v.15 no.1
• /
• pp.141-148
• /
• 2012

This study investigated the structural coloration and fabric hand of the caustic reduced fabrics for emotional garment using structural color yarns, which was spun by 37 alternating nylon and polyester layers capable of producing basic colors using biomimetic technology. The colorations of the three kinds of structural color yarns were confirmed using multi angle spectro-photometer, and their triangular cross sections composed with 37 alternating nylon and polyester layers were measured using SEM and were discussed with layer length in relation with coloration and spinning conditions were also set up. The apparent color difference and reflectance of the three kinds of fabrics with different density and weave pattern were analysed as ranging from 400nm to 700nm. The optimum fabric structural design which is made by warp and weft densities(194ends/in ${\times}$ 105picks/in) and caustic reduction condition by $100^{\circ}C$ temperature and 60minutes with NaOH, 20g/l solution were decided through analysis of the mechanical properties and fabric hands of these three kinds of fabrics treated with 3 kinds of the caustic reduction conditions. And it was shown that the rate of caustic reduction was increased from 13% to 23% with increasing temperature and time of caustic reduction. The extensibility, bending rigidity and shear modulus of caustic reduction treated fabrics were decreased by treatment of caustic reduction, on the other hand fabric compressibility was increased. And it was shown that the hand value of specimen number one which was treated with temperature $100^{\circ}C$ and time 60minute was the best and the hand of this fabric was better than that of Morpho $fabric^{(R)}$ made by Teijin co. Japan.

• Journal of Korean Society of Forest Science
• /
• v.86 no.2
• /
• pp.177-185
• /
• 1997

The influences of fertilizer treatment and clones of five willows and one hybrid poplar on above ground and soil carbon (C) accumulations in a willow bioenergy plantation were studied. The aboveground and soil samples were collected in the winter of 1992 and 1993 from the previously established willow plantation at Tully, New York, U.S.A. in 1987. Half of the plots were fertilized annually with 336kg/ha N, 112kg/ha P, and 224kg/ha K. All trees were harvested annually. The most productive clone, willow clone SV1 with fertilization, accumulated 5.4 and 6.8 t/ha/yr aboveground C contents during the sixth(1992) and seventh(1993) growing seasons, respectively. The average percentage of C in bolewood, bolebark, and branches for the five willow clones and one hybrid poplar clone ranged from 51.1 to 57.5, from 54.0 to 55.4, and from 55.6 to 56.5, respectively, among all treatment combinations. Only tyro of the six clones(SA22 and SA2) responded significantly to the addition of fertilizer by increasing the amount of aboveground C accumulated for the 1992 sampling period(clone-by-fertilizer interaction). No fertilization effect, on aboveground C content, was noted for the 1993 sampling period. No significant fertilization effect on soil C accumulation for all soil sampling depths(0-10, 10-20, and 20-40cm) was found in 1992 and 1993 sampling years. Little clone effect on soil C content was found in 1992 and 1993 sampling years, except at 0-10cm soil depth in 1992. The significant clonal effect on soil C content at 0-10cm soil depth could be because of stone content variation rather than clonal effect. The significant clone-by-fertilizer treatment interaction observed requires that evaluation of response to fertilization by willows be made for each clone individually.