• The korean journal of orthodontics
• /
• v.38 no.2
• /
• pp.95-103
• /
• 2008

Objective: This study was performed to investigate the labio/buccal clinical crown curvatures of Korean permanent teeth and to obtain the curve-ratio data in an attempt to fabricate bracket bases fit for each individual Korean permanent tooth. Methods: Three-dimensional digital models were made from 30 sets of dental casts with normal anatomic structures. According to the FA points, horizontal and vertical reference planes were established and lines were drawn on the tooth surfaces in reference to these planes. The curvature was expressed as the coefficient of a quadratic equation. Lines mesial, distal, gingival and occlusal to the horizontal, vertical reference planes and the FA point were drawn. Results: The curvature measured for each line revealed that there are no significant differences between male and female, except for maxillary canines and maxillary second bicuspids (p > 0.05). There were notable differences in the mesio-distal or gingivo-occlusal curvatures among the mandibular lateral incisors, maxillary canines, maxillary and mandibular first and second bicuspids and first molars (p < 0.05). Conclusions: The labial & buccal crown curvatures of teeth in Korean normal occlusion were measured on the mesial and distal, gingival and occlusal sides respectively in this study. Based on these data, a SWA can be developed to fit the individual features of Korean tooth crowns.

• The korean journal of orthodontics
• /
• v.35 no.6 s.113
• /
• pp.409-419
• /
• 2005

Studies for diagnostic analysis using three-dimensional (3D) CT images are recently in progress and needs for 3D craniofacial analysis are increasing in the fields of orthodontics. It is especially essential to analyze the facial soft tissue after orthodontic treatment and orthognathic surgery. In this study 3D CT images of adults with normal occlusion were taken to analyze the facial soft tissue. Norms were obtained from CT images of adults with normal occlusion (12 males, 11 females) using a computer program named V works 4.0 program. 3D coordinate planes were established using soft tissue Nasion as the reference point and a total of 20 reproducible landmarks of facial soft tissue were obtained using the multiple reconstructive sectional images (axial, sagittal and coronal images) of the V works 4.0 program: soft tissue Nasion, Pronasale, Subnasale, Upper lip center, Lower lip center, soft tissue B, soft tissue Pogonion, soft tissue Menton, Endocanthion (Rt/Lt), Alare lateralis (Rt/Lt), Cheilion (Rt/Lt), soft tissue Gonion (Rt/Lt), Tragus (Rt/Lt), and Zygomatic point (Rt/Lt). According to the established landmarks and measuring method, the 3D CT images of adults with normal occlusion were measured and the normal positional measurements and their Net (${\delta}=\sqrt{{X^2}+{Y^2}+{Z^2}}$) values were obtained using V surgery program, In the linear measurement between landmarks, there was a significant difference between males and females except Na' -Sn and En(Rt)-En(Lt). The normal ranges of Na'-Zy, Na'-Ch and Na'-Go' (facial depth) were obtained, which was difficult to measure by two-dimensional (2D) cephalometric analysis and facial photographs. These data may be used as references for 3D diagnosis and treatment planning for patients with malocclusion and dentofacial deformity.

• The korean journal of orthodontics
• /
• v.35 no.4 s.111
• /
• pp.320-329
• /
• 2005

The three-dimensional (3D) changes of bone, soft tissue and the ratio of soft tissue to bony movement was investigated in 8 skeletal Class III patients treated by mandibular setback surgery. CT scans of each patient at pre- and post-operative states were taken. Each scan was segmented by a threshold value and registered to a universal three-dimensional coordinate system, consisting of an FH plane, a mid-sagittal plane, and a coronal plane defined by PNS. In the study, the grid parallel to the coronal plane was proposed for the comparison of the changes. The bone or soft tissue was intersected by the projected line from each point on the gird. The coordinate values of intersected point were measured and compared between the pre- and post-operative models. The facial surface changes after setback surgery occurred not only in the mandible, but also in the mouth corner region. The soft tissue changes of the mandibular area were measured relatively by the proportional ratios to the bone changes. The ratios at the mid-sagittal plane were $77\~102\%(p<0.05)$. The ratios at all other sagittal planes had similar patterns to the mid-sagittal plane, but with decreased values. And, the changes in the maxillary region were calculated as a ratio, relative to the movement of a point representing a mandibular movement. When B point was used as a representative point, the ratios were $14\~29\%$, and when Pog was used, the ratios were $17\~37\%(9<0.05)$. In case of the 83rd point of the grid, the ratios were $11\~22\%(p<0.05)$.

• The korean journal of orthodontics
• /
• v.37 no.3 s.122
• /
• pp.192-203
• /
• 2007

Objective: The aim of this study was assessment of the relationship between airway space and facial morphology in Class III children with nasal obstruction. Methods: For this study, 100 Class III children (50 boys and 50 girls) were chosen. All subjects were refered to ENT, due to nasal obstruction. Airway space measurements and facial morphology measurements were measured on lateral cephalometric radiograph. Pearson correlation analysis was used to assess the relationship between airway space and facial morphology Results: Ramal height, SNA, SNB, PFH, FHR and facial plane angle were positively related to upper PAS, and sum of saddle angle, articular angle, and genial angle, SN-GoGn, Y-axis to SN and FMA negatively related to upper PAS. Genial angle, FMA were positively related to lower PAS, and articular angle, facial depth, PFH and FHR negatively related to lower PAS. PCBL, ramal height, Mn. body length, Mn. body length to ACBL, facial depth, facial length, PFH and AFH were positively related to tonsil size. Sum of saddle angle, articular angle, genial angle, facial length, AFH, FMA and LFH were positively related to tongue gap, and IMPA and overbite was negatively related to tongue gap. Upper PAS, related to size of adenoid tissue, was mainly related to posterior facial dimension following a vertical growth pattern of face and mandibular rotation. Lower PAS and tonsil size, related to anterior-posterior tongue base position, were significantly related to each other. Lower PAS was related to growth pattern of mandible, and tonsil size was related to size of mandible and horizontal growth pattern of face. Tongue gap was related to anterior facial dimension following a vertical growth pattern of face. Conclusion: Significant relationship exists between airway space and facial morphology.

• Proceedings of the Korea Society of Information Technology Applications Conference
• /
• 2007.05a
• /
• pp.281-299
• /
• 2007

IS/IT 분야 실무자가 지니고 있어야 한다고 생각되는 지식과 전문 기술들을 '지식/능력 영역'과 '소프트웨어 전문 기술 영역'으로 구분하여 각각 세부 항목을 명세하였다. 그리고 분류된 두 영역에 대하여 IS/IT 분야 실무자가 생각하는 필요한 지식 및 전문 기술들의 중요도와 IS/IT 전공 교수가 생각하는 IS/IT 실무자에게 필요한 지식 및 전문 기술들의 중요도를 조사하여 두 그룹간의 인식차 비교를 시도하였다. 조사지역은 실무자는 충청지역 및 수도권 지역에 분포하는 SI 업체를 대상으로 이루어 졌다. IS/IT 실무자를 대상으로 한 조사는 실무자 본인의 일장에서 IS/IT 실무자가 갖추어야 된다고 판단되는 지식 및 전문 기술들의 중요도를 측정하였다. 그와 더불어 그들이 수행하는 IS 활동에 대하여 투자한 시간을 기준으로 군집분석을 실시하여 세가지 그룹으로 구분하여 실무자 전체와 세 그룹간의 비교가 가능하도록 조차되었다. 비교 결과, 지식/능력 영역에서는 IS 실무자들이 상대적으로 '하드웨어에 대한 지식', '특정 조직', '운영체제에 대한 지식'에 대해 더 높은 중요도를 부여하고 있는 것으로 나타났다. 소프트웨어 전문 기술 영역에서는 실무자보다 전공교수가 생각하는 중요도가 보편적으로 더 높게 나타났다. 전공 교수는 '프리젠테이션 도구', '객체지향 언어(C++, Java 등)'에 4점 대의 높은 점수를 주어 중요한 것이 무엇인가 하는 인지가 있는 것으로 보이나 실무자 그룹에서는 특별히 중요시 여기는 항목이 명확히 드러나지 않고 보편적인 값이 median 값 주변에 위치하고 있다. 이는 현재 실무자들이 빠르게 변화하고 있는 IS/IT 환경에서 본인의 경력경로 (career path)을 위해 무엇이 중요한 갓인지 아직 명확히 하고 있지 못하는 것으로도 해석이 가능하다. 자세한 비교/분석 및 해석은 현재 진행 중이며, 여러 흥미로운 해석이 가능할 것으로 기대 된다.합형 파괴가 증가하는 경향을 나타내었다. 이상의 결과로, 상아질 접착제의 접착단계/과정이 결합내구성에 영향을 미침을 알 수 있었다. 따라서 접착과정의 단순화가 반드시 접착에 효과적이라고 할 수 없다.는 저작 운동 잔에는 2군에서 Heliomolar가 Pyramid보다 변연적합도가 우수하였고 (p < 0.05) 그 외의 군에서는 유의차가 없었으며, 저작 운동 후에는 모든 군에서 재료간 유의차가 없었다. 각 부위별 변연적합도를 비교하면, 저작 운동 전 Pyramid에서는 교합면 변연에서는 4군이 2군에 비해 높은 변연적합도를 보였고 (p < 0.05), 인접면과 치은면에서는 군 간 유의차를 보이지 않았다. Heliomolar에서는 교합면 변연에서 2, 4군이 1군에 비해 높은 변연적합도를 보였고 (p < 0.05), 인접면과 치은면에서는 군간 유의차를 보이지 않았다. 저작 운동 후 Pyramid에서는 교합면 변연에서는 3군이 1, 2군에 비해 높은 변연적합도를 보였고 (p < 0.05), 인접면과 치은면에서는 군간 유의차를 보이지 않았다. Heliomolar에서는 교합면에서 2, 3, 4군이 1군에 비해 변연적합도가 높았으며 (p < 0.05), 인접면과 치은면에서는 군간 유의차를 보이지 않았다 이번 연구를 통하여 복합레진을 간헐적 광중합시킴으로써 변연적합도가 향상될 수 있음을 알 수 있었다.시장에 비해 주가가 비교적 안정적인 수준을 유지해 왔다고 볼 수 있다.36.4%)와 외식을 선호(29.1%)${\lrcorner}$ 하기 때문에 패스트푸드를 이용하게 된 것으로 응답 하였으며, 남 여 대학생간에는 유의한 차이(p<0.05)가 인정되었다. 응답자의 체형은 ${\ulcorner}$적당하다${\lrcorner}$고 응답한 경우가 가장 많이 이러한 음식을 즐겨 먹었으며(49.5%), 그 다음은 뚱뚱한 경우도 비교적 많이 먹고

• Restorative Dentistry and Endodontics
• /
• v.31 no.6
• /
• pp.427-436
• /
• 2006

The objective of this study was to investigate the effects of various occlusal loads on the stress distribution of the buccal cervical region of a normal maxillary second premolar, using a three dimensional fnite element analysis (3D FEA). After 3D FE modeling of maxillary second premolar, a static load of 500N of three load cases was applied. Stress analysis was performed using ANSYS (Swanson Analysis Systems, Inc., Houston, USA). The maximum principal stresses and minimum principal stresses were sampled at thirteen nodal points in the buccal cervical enamel for each four horizontal planes, 1.0 mm above CEJ, 0.5 mm above CEJ, CEJ, 0.5 mm under CEJ. The results were as follows 1. The peak stress was seen at the cervical enamel surface of the mesiobuccal line angle area, asymmetrically. 2. The values of compressive stresses were within the range of the failure stress of enamel. But the values of tensile stresses exceeded the range of the failure stress of enamel. 3. The tensile stresses from the perpendicular load at the buccal incline of palatal cusp may be shown to be the primary etiological factors of the NCCLs.

• The korean journal of orthodontics
• /
• v.30 no.2 s.79
• /
• pp.175-183
• /
• 2000

The purpose of this study was to identify the compensatory adaptation of dentoalveolar structure according to the various skeletal relation through the statistical correlation between the anteroposterior, vertical skeletal and dentoalveolar relation. For this study, the sample were consisted of 101 adult subjects (51male and 50 female, mean age; male 23.6 years, female 21.5 years) who had good occlusion with the range of normal overjet and overbite and acceptable Angle's class I molar relationship which had not been related orthodontically The results were as follows : 1. Even though acceptable normal occlusion, the range of measurements which represent anteroposterior, vertical skeletal relation and dentoalveolar relation were very wide. 2. Upper and lower incisor axis were significantly correlated with anteroposterior skeletal relation, which means the mote lingual inclination of upper anterior teeth and the more labial inclination of lower anterior teeth according to the more anterior position of mandible to the maxilla (P<0.01). 3. Upper and 1ower anterior alveolar bone height was statistically correlated with the lower anterior vertical skeletal height. 4. Upper and 1ower alveolar bone height were not correlated with anteroposterior skeletal relation (P>0.05). 5. The correlation between the incisor axis and vertical skeletal was more closely related in upper anterior teeth than the lower anterior teeth. To summarize the above results, even though acceptable normal occlusion, skeletal and dentoalveolar relation was very widely ranged, and there were close relationship between the anteroposterior skeletal relation and the inclination of upper and lower anterior teeth and between the vertical skeletal relation and upper and lower anterior alveolar bone height. These finding can be concluded as compensatory adaptation to the different skeletal relationship.

• The korean journal of orthodontics
• /
• v.36 no.1 s.114
• /
• pp.1-13
• /
• 2006

Three-dimensional (3-D) laser scans can provide a 3-D image of the face and it is efficient in examining specific structures of the craniofacial soft tissues. Due to the increasing concerns with the soft tissues and expansion of the treatment range, a need for 3-D soft tissue analysis has become urgent. Therefore, the purpose of this study was to evaluate the scanning error of the Vivid 900 (Minolta, Tokyo, Japan) 3-D laser scanner and Rapidform program (Inus Technology Inc., Seoul, Korea) and to evaluate the mean error and the magnification percentage of the image obtained from 3-D laser scans. In addition, soft tissue landmarks that are easy to designate and reproduce in 3-D images of normal, Class II and Class III malocclusion patients were obtained. The conclusions are as follows; scanning errors of the Vivid 900 3-D laser scanner using a manikin were 0.16 mm in the X axis, 0.15 mm in the Y axis, and 0.15 mm in the Z axis. In the comparison of actual measurements from the manikin and the 3-D image obtained from the Rapidform program, the mean error was 0.37 mm and the magnification was 0.66%. Except for the right soft tissue gonion from the 3-D image, errors of all soft tissue landmarks were within 2.0 mm. Glabella, soft tissue nasion, endocanthion, exocanthion, pronasale, subnasale, nasal alare, upper lip point, cheilion, lower lip point, soft tissue B point, soft tissue pogonion, soft tissue menton and preaurale had especially small errors. Therefore, the Rapidform program can be considered a clinically efficient tool to produce and measure 3-D images. The soft tissue landmarks proposed above are mostly anatomically important points which are also easily reproducible. These landmarks can be beneficial in 3-D diagnosis and analysis.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.48 no.1
• /
• pp.64-76
• /
• 2021

The purpose of this study is to evaluate the position of the mandibular foramen and location and morphological characteristics of the mandibular lingula using Cone-Beam Computed Tomography (CBCT). Mandibular CBCT images of children aged 6 - 16 years were collected. A total of 180 patients were divided into 3 groups, 6 - 7, 10 - 11 and 15 - 16 years, with 30 male and female patients per group. Either side of the ramus was analyzed. The shortest distances from the anterior, posterior, superior and inferior border of the ramus to the mandibular lingula were measured. The shortest distance between the mandibular lingula and the mandibular foramen was also measured. The vertical distance from the mandibular lingula and the mandibular foramen to the occlusal plane was measured. The shapes of the mandibular lingula was classified into 4 types according to the criteria. The distances of the mandibular lingula from the anteroposterior and vertical reference points of the ramus increased in all directions with age. The distance between the mandibular lingula and the mandibular foramen also increased with age. The location of the mandibular lingula and the mandibular foramen in relation to the occlusal plane moved upwards with age. The most common shape of the mandibular lingula was triangular, followed by nodular, truncated and assimilated, and there was no difference in the shape according to age. It is recommended that the horizontal insertion point of the anesthesia from the anterior border of the ramus increased to 17 mm, 18 mm, and 19 mm according to the age groups. It is also suggested that the vertical insertion point increased by 2 - 3 mm, 5 - 6 mm and 9 - 10 mm above the occlusal plane according to the age groups.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.34 no.4
• /
• pp.297-305
• /
• 2018

Purpose: This study aimed to analyze stress distribution and maximum von Mises stress generated in intracoronal restorations and in tooth structures of mandibular molars with various types of cavity designs and materials. Materials and Methods: Three-dimensional solid models of mandible molar such as O inlay cavity with composite and gold (OR-C, OG-C), MO inlay cavity with composite and gold (MR-C, MG-C), and minimal invasive cavity on occlusal and proximal surfaces (OR-M, MR-M) were designed. To simulate masticatory force, static axial load with total force of 200 N was applied on the tooth at 10 occlusal contact points. A finite element analysis was performed to predict stress distribution generated by occlusal loading. Results: Restorations with minimal cavity design generated significantly lower values of von Mises stress (OR-M model: 26.8 MPa; MR-M model: 72.7 MPa) compared to those with conventional cavity design (341.9 MPa to 397.2 MPa). In tooth structure, magnitudes of maximum von Mises stresses were similar among models with conventional design (372.8 - 412.9 MPa) and models with minimal cavity design (361.1 - 384.4 MPa). Conclusion: Minimal invasive models generated smaller maximum von Mises stresses within restorations. Within the enamel, similar maximum von Mises stresses were observed for models with minimal cavity design and those with conventional design.