• Journal of the korean academy of Pediatric Dentistry
• /
• v.37 no.3
• /
• pp.345-351
• /
• 2010

The purpose of this study is to compare microleakage and penetration depths of sealants applied in carious and sound fissures. Extracted premolars(n=80) were divided into 4 groups according to caries status. 1; sound, 2; stained, 3; initial caries, 4; enamel caries. Sealants were applied to the occlusal groove as per manufacturers' instructions, and specimens were thermocycled, stained, sectioned, and examined for microleakage and penetration ability. The results of the present study are as follow: 1. It showed significantly higher microleakage scores in group I than group Two, Three, Four(p<0.05), but no significant difference was found between group Two, Three, and IV(p>0.05). 2. It showed significantly higher penetration scores in group Four (p<0.05), followed by group One, Two, Three, but no significant difference was found between group One, Two, and Three(p>0.05). Based on the results of present study, when the borders of the fissure sealant are on carious enamel, a significantly higher microleakage must be expected. It is considered that depth of enamel caries in the fissure should be taken into account when applying a fissure sealant.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.45 no.1
• /
• pp.90-97
• /
• 2018

The purpose of this study was to evaluate the effect of fissurotomy on the penetration and microleakage of flowable resins for carious fissures. A total of 250 extracted premolars with early fissure caries were selected and divided into five groups according to the fissurotomy; no fissurotomy (n = 50), fissurotomy with $Fissurotomy^{(R)}$ original bur (n = 50), fissurotomy with $Fissurotomy^{(R)}$ Miro NTF bur (n = 50), fissurotomy with SF104R tapered diamond bur (n = 50), fissurotomy with 1/2 round carbide bur (n = 50). Two types of flowable resins ($UniFil^{(R)}Flow$, $Filtek^{(R)}Flow$) were used as sealing materials. All samples were sectioned and observed using a stereoscopic microscope after thermocycling and immersing in methylene blue solution. The adaptation of flowable resin to the fissure wall was observed using scanning electron microscopy. The penetration of flowable resin into the carious fissure was significantly increased by fissurotomy, which also decreased microleakage. Fissure preparation using different burs showed a significantly different in penetration, but did not show any difference in microleakage. $Unifil^{(R)}Flow$ showed better penetration than $Filtek^{(R)}Flow$, but there was no significant difference in microleakage. Fissurotomy can be used to increase the penetration of flowable resin into carious fissures and decrease microleakage.

• Restorative Dentistry and Endodontics
• /
• v.31 no.1
• /
• pp.20-29
• /
• 2006

The purpose of this study was to analyze the stress distribution aspect of unrestored and restored combined shape (wedge shape occulusally and saucer shape gingivally) class V cavity, which found frequently in clinical cases. A maxillary second permolar restored with a combined shape class V composite restorations were modeled using the three dimensional finite element method. Static occlusal load of 170 N was applied on lingual incline of buccal cusp at the angle of $45^{\circ}$ with the longitudinal axis of the tooth. And three dimensional finite element analysis was taken by ANSYS (Version 6.0, Swanson Analysis System Co., Houston, U.S.A) program which represent the stress distribution on unrestored and restored cavity wall and margin. The conclusions were as follows. 1. Compared to the unrestored cavity, Von Mises stress at the cementoenamel junction and line angle of the cavity base were reduced and in restored cavity. 2. Von Mises stress at the occlusal and cervical cavity margin and wall were increased in restored cavity in comparison with the unrestored cavity. 3. In the hybrid and hybrid/flowable composite resin restoration, Von Mises stress at the cementoenamel junction and line angle of the cavity base were reduced more than in the flowable restoration. 4. In the hybrid and hybrid/flowable composite resin restoration, Von Mises stress at the occlusal and cervical cavity margin and wall were increased more than in the flowable restoration.

• The Journal of Korean Academy of Prosthodontics
• /
• v.50 no.1
• /
• pp.29-35
• /
• 2012

Purpose: The purpose of this study was to analyze temperature change along the implant-bone interface induced by grinding the occlusal surface of implant gold prosthesis and to compare the temperature generated by grinding of prosthesis with different cooling methods. Materials and methods: The experimental gold prostheses were fabricated with dental gold alloy and castable abutment. The prostheses had 3 cylindrical protrusions on the occlusal surface with 1mm in height. Temperature was measured using 16 thermocouple wires attached to the implant fixture surface and the fixture was embedded in an acrylic resin block inside the $37^{\circ}C$ water bath. Cylinders were grinded for a period of 30 second with a low-speed handpiece with green stone point. One cylindrical protrusion was grinded without cooling, the second one was grinded with air blow, and the third one was grinded with water-spray. Results: The mean maximum temperature was measured more than $47^{\circ}C$ of the implant and the maximum temperature was measured at the cervical portion of the implant in the group without cooling. There was statistically significant difference between the group without cooling and the groups with cooling (P<.05). However, there was no significant difference at all portion of implant in the groups with cooling (P>.05). Conclusion: The results of this study support that the grinding of implant gold prosthesis without cooling may damage the peri-implant tissue. The continuous use of air blow and water-spray adjacent to prosthesis during the grinding of implant gold prosthesis may prove to be beneficial for cooling of the implant.

• The Journal of Korean Academy of Prosthodontics
• /
• v.52 no.1
• /
• pp.42-47
• /
• 2014

Decrease of occlusal vertical dimension (OVD) due to loss of teeth structure and destruction of the occlusal plane by severely worn dentition may cause cross bite or temporomandibular joint disorder by following change of facial feature or the loss of anterior guidance. Full mouth rehabilitation via an increase of the OVD can be considered to avoid this problem and proper evaluation of patient's OVD is essential. An 80 year old male visited for overall prosthodontic treatment, cross bite due to continuous wear and following decrease of the OVD were observed. We analyzed the existing occlusal relationship using the diagnostic cast, the radiographic evaluation and clinical test, and then proper increase of OVD was selected. The new OVD on diagnostic wax up was placed by the temporary restoration. After 3 months of observation period, final restoration with fixed partial dentures and implant overdenture were made. Throughout the follow-up period of 8 months, the aesthetic and functional improvement can be obtained.

• The Journal of Korean Academy of Prosthodontics
• /
• v.61 no.4
• /
• pp.284-292
• /
• 2023

Stable posterior occlusal support is crucial for adequate masticatory function and facial aesthetics. In elderly patients over the age of 65, masticatory ability has a significant impact on nutritional intake and overall health. This case report presents a prosthetic treatment of an elderly patient with edentulous maxilla and bilateral posterior edentulous mandible. The upper jaw was restored with a complete denture to establish an ideal occlusal plane, and the three-dimensional positions of the mandibular implants were determined accordingly. The implants were placed through computer-guided implant surgery and were immediately loaded with fixed provisional restorations. The implant-fixed zirconia final restorations were inserted in the lower posterior region, and the occlusal surface of posterior artificial teeth in the upper denture was substituted with cobalt-chrome alloy to resist occlusal wear. The patient's posterior occlusal support and masticatory function were promptly restored through this treatment process, and long-term stability against wear was also obtained.

• Proceedings of the Korean Information Science Society Conference
• /
• 1999.10b
• /
• pp.598-600
• /
• 1999

본 논문은 수공으로 이루어지는 치과 치료 및 보철물 제작을 3차원 컴퓨터 모델링을 하여 좀 더 정확하고 빠른 시간에 처리할 수 있는 시스템을 소개한다. 이 시스템은 기존 2차원 기반이 아닌 3차원 기반으로 설계되었으며, 구강의 석고 모형을 3차원으로 컴퓨터에 모델링한 후, 모델링 정보로부터 능선(ridge), 교두(crusp), 피트(pit), 열구(fissure), 변연(margin) 등과 같은 치아 특성 정보추출과 교합면 생성을 통하여 보철물, 예를 들어 Conus 내관과 외관을 제작한다. 해부학적으로 무수히 많은 변수를 갖고 있는 구강 구조에 대해 본 논문에서는 이들 일련의 과정에서 요구되는 컴퓨터 모델링의 주요 기술들을 제시한다.

• The Journal of the Korean dental association
• /
• v.19 no.2 s.141
• /
• pp.159-162
• /
• 1981

The author devised a simple technique for duplicating occlusal contour of natural teeth on the prepared abutments using hard stone index obtained from the study cast of natural teeth. Throughout this author devised method, the following advantages are studied. Firstly the dentist can obtain an ideal occlusal wax patterns which have arrived at the physiologic state through a long period of adjustment to various habits and functional movements. Secondly the construction procedure is simple, and thirdly it is easy to adjust wax pattern of nomal natural teeth which duplication is required.

• The korean journal of orthodontics
• /
• v.28 no.2 s.67
• /
• pp.255-268
• /
• 1998

This study was investigated to assess the difference of facial height and occlusal plane inclination between normal occlusion group and class II malocclusion group. The subjects consisted of 50 normal occlusion (male 25, female 25) and 50 class II(male 25, female 25) malocclusion patients. All subjects are adult. lateral cephalogram was taken with standard method traced, and digitized for each subjects. The computerized statiscal analysis was carried out with SPSS program. The results were as follows 1. In class II malocclusion group, variables significant different from normal occlusion group were as follows ; SN-FOP, FH-BOP, MP-BOP, AB-BOP, AB-FOP, Facial plane-BOP, FP-FOP 2. In class II malocclusion group, the posterior facial height -especially posterior lower facial height-was significantly smaller than normal occlusion group.(P<0.05) 3. In class II malocclusion group, the angles between occlusal plane and upper and lower incisor, the angle between upper molar and bisected occlusal plane were significantly larger than those of normal occlusion group. (P<0.05) 4. L1 to Mandibular plane (mm) was a unique factor of occlusal plane position that showed significant difference in class II malocclusion group. 5. The correlation between overbite and occlusal plane inclination existed in class II malocclusion group, but the correlation didn't exist in normal occlusion group.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.32 no.2
• /
• pp.229-235
• /
• 2005

A problem that affects children's dentitions is the harmful habit which is difficult to treat. Harmful habits for children are such as abnormal swallowing patterns, low/forward tongue rest posture problem, habitual open-lips resting posture, habitual mouth-breathing, excessive digital sucking habit and tongue thrusting. Tongue thrusting habits cause a bit of cranio-facial skeletal changes and a great deal of dental malocclusion such as anterior open bite. Anterior open bite causes masticatory, speech, and esthetic problems in the growing children and difficulties in diagnosis, treatment, and the prediction of its prognosis. The treatments of such abnormal behaviors involve orofacial myofunctional therapy and using of habit breaking appliance. The prognosis is not determined by the presence of severity of oral habit but the skeletal tendency of the patient. Usage of tongue crib resulted in not only the discontinuance of the habit but also improvement in overbite and overbite. This study showed that relatively successful results could be generated by using removable tongue crib and myofunctional therapy in the case of openbite related to tongue thrusting habit.