• Journal of Dental Rehabilitation and Applied Science
• /
• v.38 no.3
• /
• pp.138-149
• /
• 2022

The clinical applicability of ceramics can be increased by analyzing the causes of fractures after fracture testing of dental ceramics. Fractography to analyze the cause of fracture of dental ceramics is being widely applied with the development of imaging technologies such as scanning electron microscopy. Setting the experimental conditions is important for accurate interpretation. The fractured specimens should be stored and cleaned to avoid contamination, and metal pretreatment is required for better observation. Depending on the type of fracture, there are dimple rupture, cleavage, and decohesive rupture mainly observed in metals, and fatigue fractures and conchoidal fractures observed in ceramics. In order to reproduce fatigue fracture in the laboratory, which is the main cause of fracture of ceramics, a dynamic loading for observing slow crack growth is essential, and the load conditions and number of loads must be appropriately set. A typical characteristic of a fracture surface of ceramic is a hackle, and the causes of fracture vary depending on the shape of hackle. Fractography is a useful method for in-depth understanding of fractures of dental ceramics, so it is necessary to follow the exact experimental procedure and interpret the results with caution.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.35 no.1
• /
• pp.11-17
• /
• 2008

The purpose of this study was to investigate early histological changes and calcitonin gene-related peptide (CGRP) expression in the dental pulp of the rat after Er:YAG laser preparation. Occlusal cavities were prepared in the upper first molars using either Er:YAG laser and conventional bur. At 48 hours after cavity preparation, the teeth were processed for hematoxylin-eosin stain and CGRP immunohistochemistry. The results were as follows : 1. The cavity floor by Er:YAG laser preparation was more irregular shape compared with those by bur preparation and there are some cracks in the directions of dentinal tubules. 2. There were more inflammatory cell infiltration and disruption of odontoblast in the dental pulp by Er:YAG laser preparation in comparison with the dental pulp by bur preparation. 3. CGRP expression in the pulp tissue by both Er:YAG laser and bur preparations were increased and higher than in the normal pulp. The expression pattern of CGRP was more strong in the pulp by Er:YAG laser preparation. These results indicate that Er:YAG laser is useful in the operative dentistry such as caries removal and cavity preparation if properly applied.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.32 no.3
• /
• pp.149-157
• /
• 2016

Tooth preparation design is essential for successful laminate veneer treatment. Preservative tooth preparation limited on enamel, supra-margin advantageous for plaque control, and maintaining contact points known as a standard concept. However, the tooth preparation design has been the controversial issue. In biomechanical considerations, the incisal coverage should be decided on esthetic needs and necessity for the anterior guidance reconstruction. In occasion for sufficient enamel thickness, preparation can prolong to the palatal side but not recommended at palatal concavity. Elongation to contact point is selective option according to the cases. If an old resin restoration located at contact area, laminate veneer should cover over half area of that after surface treatment. The laminate veneer can be also selected at a partially discolored tooth root canal therapy (RCT) and at this occasion, the fiber-reinforced composite (FRC) posts are recommended.

• Journal of Periodontal and Implant Science
• /
• v.25 no.3
• /
• pp.741-755
• /
• 1995

Currently titanium is the material of choice for implants because of its biological acceptance. This high degree of biocompatibility is thought to result, in part, from the protective and stable oxide layer that presumably aids in the bonding of the extracellular matrix at the implant-tissue interface. Endosseous dental implants are interfaced with bone, connective tissue, and epithelium when implanted into the jaw bone. The soft tissue interface including connective tissue and epithelium is one of the most critical factors in the determination of implant maintenance and prognosis. For maintenance of failing or failed implants, it is essential to treat the implant fixture surface to remove bacterial endotoxins and make a surface tolerated by surrounding soft and hard tissues. In this study, the effect of mechanical treatment on titanium plasma sprayed implant on adhesiveness and proliferation of human gingival fibroblasts and changed surface characteristics were studied. titanium plasma sprayed discs manufactured by Friedrichsfeld company were treated with loaw speed stone bur, a rubber point and a jetpolisher. Its surface components were analyzed with Energy dispersive X-ray spectroscopy to evaluate whether the surface characteristics were altered or not. To observe the spreading pattern of the human gingival fibroblasts which attached to the all specimens author used the scanning electron microscope. The results were as follows : Pure titanium and plasma sprayed titanium, stone polished titanium showed titanium peak and small amout of aluminum, so there was no alteration on surface characteristics. Under the scanning electron microscopic examination in the initial attachment of human gingival fibroblast, there was a slight enhancement in pure titanium, stone polished titanium than plasma sprayed titanium. After 6 hours, the pure titanium and stone polished titanium showed human gingival fibroblasts were elongated and connected with numerous processes. Human gingival fibroblasts were more intimately attached on the pure titanium discs than on the other discs. The human gingival fibroblasts attached on the plasma sprayed titanium by thin and elongated processes. After 24 hours, the human gingival fibroblasts connected with each other via numerous processes and compeletly covered the pure titanium and stone polshed titanium discs. Human gingival fibroblasts had multiple point contacts with more long and thin lamellopodia and showed a little bare surface on plasma sprayed titanium discs.

• The korean journal of orthodontics
• /
• v.18 no.2
• /
• pp.421-433
• /
• 1988

The purpose of this study was to investigate the characteristics of craniofacial morphology in adult with crowded dentition. The craniofacial morphology associated with normal and crowded of mandibular dentition was studied in lateral cephalometric radiograph obtained from 145 subjects grouped 44 males and 40 females in normal group, 33 males and 28 females in crowded group. The conclusions were as follows: Means, standard deviations and facial polygons from measurements were obtained from normal and crowded groups. Palatal plane to SN, occlusal plans to SN, mandibular plane to SN, mandibular plane to palatal plane and gonial angle measurements of crowded group were significantly different from normal group and were larger than normal group. SNA, SNB measurements of crowded group were significantly different from normal group and were smaller than normal group. Significant differences were observed between normal group and crowded groups on the basis of $SN/{\underline{1}}$, PP/1, $MP/{\bar{1}}$, and compared with normal group, upper incisors of crowded group were inclined more labially, whereas lower incisors of crowded group were inclined more lingually. Posterior facial height and ramal height were shorter in males of crowded group than those of normal group. Posterior facial height, mandibular length and posterior cranial base length were shorter in females of crowded group than those of normal group. Anterior facial height was longer in females of crowded group than those of normal group.

• The korean journal of orthodontics
• /
• v.30 no.3 s.80
• /
• pp.297-306
• /
• 2000

Lateral cephalometric X-ray films in maximal intercuspation and maximal opening of 68 children were taken and analyzed to examine the pattern of condylar movement and to study the relationship between opening movement and morphologic factors of craniofacial skeleton. The results were as follows : 1. The mean value of maximal opening capacity was 47.1mm, condylar moving distance was 18.1mm, horizontal condyle movement was 17.5mm, vertical condyle movement was 3.8mm and condylar moving angle was $13.1^{\circ}$. 2. The maximal opening capacity had positive relationship with the length of anterior cranial base, mandible and maxillary complex and with posterior facial height and had negative relationship with articular angle, sagittal jaw relationship. 3. Vertical condyle movement and condylar moving angle had positive relationship with articular angle and had negative relationship with gonial angle. 4. Horizontal condyle movement and condylar moving distance had positive relationship with the length of maxillary complex.

• The korean journal of orthodontics
• /
• v.26 no.5 s.58
• /
• pp.601-611
• /
• 1996

Craniofacial growth pattern is an important diagnostic data in the course of orthodontic diagnosis and treatment planning ; it also has great influence in the establishment of occlusion as well as shaping and development of face. There have been many studies to classify different craniofacial growth patterns and attempts to predict growth patterns. This study aimed to correlate craniofacial growth pattern and symphysis morphology. 120 adult patients with age from 19 to 39 (mean age : 23.1) were chosen as subjects , using lateral cephalometric films. their anterior to posterior facial height ratios were calculated. They were divided into 3 groups - clockwise growth pattern with $56\%-62\%$(36subjects), counter-clockwise growth pattern group with $65\%$-80\%$(43subjects) and normal growth pattern group with $62\%-65\%$(41subjects). Symphysis morphology and Prominence evaluation in each subject were studied and the following conclusions were drawn : 1. In comparison of symphysis morphology between the sex groups, men showed large symphysis height and prominence. 2. Concerning the symphysis morphology, the clockwise growth pattern group showed larger height, H/D ratio and actual length but smaller depth, angle, effective length and E/A ratio compared to the counter -clockwise growth pattern group. 3. Those with smaller prominance of symphysis showed clockwise growth tendency and those with larger prominance showed counter-clockwise growth tendency.

• The Journal of Korean Academy of Prosthodontics
• /
• v.60 no.3
• /
• pp.276-282
• /
• 2022

Close communication between clinicians and dental technicians is an important factor in providing successful prostheses. The exchange of opinions with laboratories has mainly been in the form of written prescriptions and a photos, but it has been reported that information transmission may be limited. Currently, as digital technology-based prosthesis fabrication is common, 3D image objects can be stored on the web and can be easily viewed through a mobile web browser. In this article, we introduce cases where the design of the prosthesis was improved by designing the prosthesis using CAD software and reviewing the prosthesis designed with the clinical side through a web viewer. Through this protocol, it was possible to improve the occlusal surface and crown contour, the opposing teeth condition, the size of the gingival embrasure, and the shape of pontic. The process of sharing, discussing, and modifying the prosthesis design with the clinician and technician through a web viewer contributes to reflecting the diversity of oral conditions and individualized needs, thereby helping to make functional and esthetic prostheses.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.26 no.3
• /
• pp.492-498
• /
• 1999

Oculodentodigital syndrome(ODD) was first reported by Lohmann in 1920 and termed by Meyer Schwicketath, which they called "dysplasia oculo-dento-digitalis" in 1957. It is somewhat rare heritable disease. ODD is generally inherited in an autosomal dominant pattern with a complex phenotype. The characteristic features are : (1) unique facial features, (2) microphthalmos, (3) syndactyly and camptodactyly of 4th and 5th fingers, (4) osseous anomalies of the middle phalanges of 5th fingers and toes, (5) enamel hypoplasia, (6) dry lusterless hair. We found several occlusal wearing and yellow discoloration of succedaneous teeth, multiple caries lesions, premature loss and pulpal involvement of primary teeth with associated enamel abnormalities caused by generalized enamel hypoplasia in a fairly constant oral finding. Occasionally partial anodontia, microdontia and cleft lip and palate can be manifested. This case, a 9-year-old female with repaired bilateral syndactyly was referred to pediatric dental clinic, Pusan National University Hospital for evaluation of severe attrition of teeth and caries lesions. She had most of the above mentioned typical manifestations of the syndrome. Dental treatment including caries control, stainless steel crown were performed.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.36 no.2
• /
• pp.310-317
• /
• 2009

Dens evaginatus is a dental anomaly involving an extra cusp or tubercle that protrudes from the occlusal surface of the affected tooth. The prevalence of dens evaginatus is 1 to 4 percent, and dens evaginatus is observed most commonly in premolars. It can be worn or fractured easily, resulting in pulpal exposure, pulpal infection, loss of vitality, facial infection and osteomyelitis. Since the tooth frequently has the immature apex when the tubercle is fractured, there is difficulty in treatment. Although calcium hydroxide is widely used for pulp treatment of an immature permanent tooth, several alternatives have been suggested to reduce patient's appointments. Mineral trioxide aggregate is considered biocom-patible and has excellent marginal sealing ability. In addition, it can minimize patient's visits. In this case report, apexification with MTA was attempted on the immature premolars in patients with cellulitis patient, caused by pulp necrosis due to dens evaginatus. Favorable clinical and radiologic results were achieved. In one case, continued root formation was observed.