• Title/Summary/Keyword: 교통축

Search Result 155, Processing Time 0.025 seconds

Damage Cause Analysis of Concrete Sleepers for Sharp Curved Track on Urban Railway Bridge (도시철도 교량상 급곡선 자갈궤도용 콘크리트침목 손상원인 분석)

  • Choi, Jung-Youl;Shin, Tae-Hyoung;Chung, Jee-Seung
    • The Journal of the Convergence on Culture Technology
    • /
    • v.7 no.3
    • /
    • pp.517-522
    • /
    • 2021
  • In this study, the causes of damage to the concrete sleepers in a ballast track with under sleeper pads attached to the base of the sleepers installed in the sharp curved track(R=180m) of the urban railway bridge were analyzed. The damage types of concrete sleepers were investigated, and the correlation with track irregularity was reviewed. Also, stress generated in the concrete sleeper was reviewed through structural analysis. As a result, most of the cracks of the sleepers occurred in the section with severe track irregularity. In addition, as a result of the analysis, the stress generated in the track components and the sleepers was found to be reduce in the fastening system using the 4-anchor.

Impact of Fourth Industrial Revolution on Airport Management System: Moderator Effect of Convergence and Leadership (4차 산업혁명이 공항경영시스템에 미치는 영향 : 융합 및 리더십의 조절효과)

  • Lee, Yung-Kil;Baek, Jeong-Sun;Park, Sung-Sik
    • Journal of Advanced Navigation Technology
    • /
    • v.26 no.5
    • /
    • pp.289-303
    • /
    • 2022
  • The purpose of this study verify to influence the effect of the 4th industrial revolution recognized by airport operators on the airport management system and the moderator effects of convergence and leadership between these influence relationships. Data collected through a survey of airport operators using simple random sampling at six international airports in Korea. Data analysis performed using Structural Equation Modeling. The research results found that the 4th industrial revolution had a positive effect on the airport management system. Also, moderator effects of convergence and leadership found significant statistically. In this paper, we asserts that it should be reconstructed the airport management system as a system suitable for the era of the 4th industrial revolution. This paper provide theoretical data and directions for empirical research to airport researchers, and implications for airport enterprise managers and airport policy planners. The findings of this study are particularly helpful for international airports that have adopted the technologies of the Fourth Industrial Revolution.

Planning the New City Based on the Geomancy: A Case of the Design of the New Multi-functional Administrative City (NMAC) (경관풍수에 입각한 신도시의 개념적 설계 : 행정중심복합 예정도시를 사례로)

  • Seo, Tae-Yeol;Ock, Han-Suk
    • Journal of the Korean Geographical Society
    • /
    • v.40 no.5 s.110
    • /
    • pp.491-513
    • /
    • 2005
  • The Republic of Korea is planning to build the now Multi-functional Administrative city (NMAC). The purpose of this paper is to suggest the conceptual framework for this new city that relies on the Korean geomancy, oriental viewpoint on man and nature relationship, particularly in Korea. According to the Geomancy which could conceptualize the human-environment relationship in the site, the overall landscape image of the city could be symbolized by two flying crane with three Taegueks. In transforming the overall landscape image to urban form, two diamonds which means eternity and strength arises from the western spatial viewpoint, as means to protect and harmonize the human, land and mountain relationship in this site and the symbolic meaning of this site as generative and sacred place in Korean people's mind. On the one hand, through juxtaposing of the two diamonds a geometric structure shows up, on the other hand the main axis of the city could be established from two crane and three Taegueks. On the North-South axis from the core of the symbolic green axis, symbolic things will be located, and the administrative offices will be Placed on the East-West axis. Peripherals of the central axis also play a role in developing overall land use from image. The buildings and residents could be arranged and located according to undulations and this is based on the oriental theory of geomancy. We can build cultural amenities on the head part of the crane and on the core area.

Stabilization of Recurrent Medial Shoulder Luxation by Use of Three Bone Anchors in a Dog (재발성 내측 어깨 탈구를 보이는 개에서 본 앵커를 이용한 외과적 치료 증례)

  • Yoon, Hun-Young;Roh, Mi-Young;Jeong, Soon-Wuk
    • Journal of Veterinary Clinics
    • /
    • v.30 no.1
    • /
    • pp.45-48
    • /
    • 2013
  • A 12-year-old male poodle weighing 2.0 kg presented for evaluation of right thoracic limb lameness. The owner reported that the dog showed recurrent bilateral shoulder joint luxation after a car accident for a year. Recently, the left shoulder joint appeared well maintained, but right shoulder joint luxation was exacerbated. On physical examination, the dog showed non-weight bearing lameness on the right thoracic limb. Craniocaudal radiographic views revealed medial displacement of the right humerus. Mediolateral radiographic views revealed overlap of the glenoid cavity and humeral head. Muscle atrophy of the right thoracic limb, reduced biceps brachii muscle tendon tone, a tear of the medial glenohumeral ligament, and a rupture of the subscapularis tendon were identified intraoperatively. Transposition of the biceps muscle tendon was performed. However, at 7 days, there was evidence of right shoulder reluxation on radiographs. The second surgery was performed with two $2mm{\times}6mm$ cortical bone anchors and a $4mm{\times}6mm$ cancellous bone anchor placed in the cortical bone of the distal scapula and the cancellous bone of the proximal humerus respectively. Two scapular bone anchors were then connected with a humeral bone anchor using heavy nylon suture to minimize shoulder abduction range of motion. On radiographs right after surgery and 6 weeks after surgery, the affected limb revealed no evidence of medial shoulder luxation. At 6 months, no evidence of lameness was noted on the right thoracic limb.

The Strategic Research Approach for the Grand Plan of the Korean Peninsula Infrastructure (통일한반도 국토인프라 Grand Plan 연구 구상)

  • Lee, Bok-Nam
    • Land and Housing Review
    • /
    • v.6 no.2
    • /
    • pp.43-48
    • /
    • 2015
  • Right after president Keun-Hae Park's announcement at German Dresden on March 2014, both expectation and skepticism have been raised for the Korean unification. The unification would give a great chance for the economic prosperity in the positive sense. In the negative sense, it would only give a great burden to the Republic's financial status. Comparing the expectation of the unification, there are lack of structured preparation, duplicated and/or overlapped systematic approach, and even the national strategies are diffused. There are several individual research papers, analytical data and information, researches on the industry and technology. However most of the previous researches and findings are unstructured and lack of completeness. It is hard to find out the overall feature of the unification strategy. West German has compassed that it knew very few the reality of East German status. The Korean Government may know much less about North Korea's condition comparing to West German. Before the actual unification in the Korean peninsula, it needs the Grand Plan for the national infrastructure and land utilization of the Korean peninsula. During the development of the Grand Plan for the Korean peninsula, the Asian Global transportation network could be developed at the same time. The German's unification experience can give a great opportunity to the development of the Gran Plan. The data and information, and the previous researches should be classified and structured in a way of systematic arrangement. Since most of investment and budget for the unification come from the Korea, it would be very much beneficial for the Korean people. The openness and early exposures of the Grand Plan for the national infrastructure are considered as mandatory action.

Evaluation of Hot Mix Asphalt Properties using Complex Modifiers (복합개질제를 이용한 아스팔트 혼합물의 물성 평가)

  • Lee, Kwan-Ho;Kim, Seong-Kyum
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.19 no.5
    • /
    • pp.146-152
    • /
    • 2018
  • In this study, to improve the performance of asphalt mixtures for plastic deformation occurring mainly in Korea, complex modifiers were prepared by mixing powders and liquid type modifiers. The main constituents were powdery diatomaceous earth, mica and carbon black, and liquid type solid 70% SBR latex. The tensile strength ratios for the two asphalt mixtures used in the test were above 0.80 for the Ministry of Land Transportation (2017) asphalt mixture production and construction guidelines. The effects of increasing the tensile strength in the dry state was more than 14% when the composite modifier was added. The deformation rate per minute by the wheel tracking test load was an average of 0.07 to 0.147 for each mixture. The strain rate per minute was improved by the modifier, and the dynamic stability was improved by almost 100% from 295 to 590. In addition, the final settling was reduced from 11.38 mm to 9.57 mm. A plastic deformation test using the triaxial compression test showed that the amount of deformation entering the plastic deformation failure zone at the end of the second stage section and in the third stage plastic deformation section was 1.76 mm for the conventional mixture and 1.50 mm for the complex modifier mixture. The average slope of the complex modifier asphalt mixture mixed with the multi-functional modifier was 0.005 mm/sec. The plastic deformation rate is relatively small in the section where the road pavement exhibits stable common performance, i.e. the traffic load.

Study of the Operation of Actuated signal control Based on Vehicle Queue Length estimated by Deep Learning (딥러닝으로 추정한 차량대기길이 기반의 감응신호 연구)

  • Lee, Yong-Ju;Sim, Min-Gyeong;Kim, Yong-Man;Lee, Sang-Su;Lee, Cheol-Gi
    • The Journal of The Korea Institute of Intelligent Transport Systems
    • /
    • v.17 no.4
    • /
    • pp.54-62
    • /
    • 2018
  • As a part of realization of artificial intelligence signal(AI Signal), this study proposed an actuated signal algorithm based on vehicle queue length that estimates in real time by deep learning. In order to implement the algorithm, we built an API(COM Interface) to control the micro traffic simulator Vissim in the tensorflow that implements the deep learning model. In Vissim, when the link travel time and the traffic volume collected by signal cycle are transferred to the tensorflow, the vehicle queue length is estimated by the deep learning model. The signal time is calculated based on the vehicle queue length, and the simulation is performed by adjusting the signaling inside Vissim. The algorithm developed in this study is analyzed that the vehicle delay is reduced by about 5% compared to the current TOD mode. It is applied to only one intersection in the network and its effect is limited. Future study is proposed to expand the space such as corridor control or network control using this algorithm.

Development of Inspection Robot for Removing Snow on Stays of Cable-Stayed Bridge (사장교 케이블의 잔설 제거용 점검 로봇 개발)

  • Kim, Jaehwan;Seo, Dong-Woo;Jung, Kyu-San;Park, Ki-Tae
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.21 no.3
    • /
    • pp.246-252
    • /
    • 2020
  • Safety accidents have been reported due to falling accumulated snow from cables of cable-supported bridges. In addition to the direct damage caused by falling snow, secondary damage, such as traffic accidents, can occur. Various methods have been proposed to prevent these accidents, but there are still problems in safety and practicality. In this study, a cable robot type was selected as one of the active methods for removing accumulated snow on cables. An attempt was made to increase the climbing ability of the robot to improve the efficiency of snow removal. In addition, the available range of cable diameter for the robot can be adjusted flexibly to be applied to cables used in the field. A high-resolution camera was also installed to check the surface condition of the cable in real time to increase the utility, and be used as a cable inspection robot. A three-axis accelerometer and a tension conversion algorithm were added to measure the tension force of cables. To verify the performance, indoor and field experiments were conducted, and future improvements for the inspection robot were proposed.

Development of small constructed wetland for urban and roadside areas (도시 및 도로 조경공간을 활용한 소규모 인공습지 조성 기술)

  • Kang, Chang-Guk;Maniquiz, Marla C.;Son, Young-Gyu;Cho, Hye-Jin;Kim, Lee-Hyung
    • Journal of Wetlands Research
    • /
    • v.13 no.2
    • /
    • pp.231-242
    • /
    • 2011
  • Recently, the green spaces in the urban areas were greatly reduced due to urbanization and industrialization. As urban structures such as roads and buildings are built, the amount of impervious area within a watershed increases. High impervious surfaces are the common causes of high runoff volumes as the soil infiltration capacity decreases and the volume and rate of runoff increase thereby decreasing the groundwater recharge. These effects are causing many environmental problems, such as floods and droughts, climate change, heat island phenomenon, drying streams, etc. Most cities attempted to reduce sewer overflows by separating combined sewers, expanding treatment capacity or storage within the sewer system, or by replacing broken or decaying pipes. However, these practices can be enormously expensive than combined sewer overflows. Therefore, in order to improve these practices, alternative methods should be undertaken. A new approach termed as "Low Impact Development (LID)" technology is currently applied in developed countries around the world. The purpose of this study was to effectively manage runoff by adopting the LID techniques. Small Constructed Wetland(Horizontal Subsurface Flow, HSSF) Pilot-scale reactors were made in which monitoring and experiments were performed to investigate the efficiency of the system in removing pollutants from runoff. Based on the results of the Pilot-plant experiments, TSS, $COD_{Cr}$, TN, TP, Total Pb removal efficiency were 95, 82, 35, 91 and 57%, respectively. Most of the pollutants were reduced after passing the settling tank and the vertical filter media. The results of this study can contribute to the conservation of aquatic ecosystems and restoration of natural water cycle in the urban areas.

Manufacturing Industries and Policy Agenda of Goryeong County (고령군 제조업의 실태와 정책과제)

  • Lee, Chul-Woo
    • Journal of the Korean association of regional geographers
    • /
    • v.14 no.4
    • /
    • pp.290-308
    • /
    • 2008
  • The industrial development of Goryeong County was started by the operation of the Ssangrym Agro¬industrial complex in the 1980s. As of 2m3, there are 6 industrial complexes in Goryeong County which account for 80 percent of total employment and 67 percent of total production outPuts in local manufacturing. The local manufacturing industries grew steadily before the 1997 financial crisis which resulted in industrial decline and have shown again a growing tendency since 2000. In this period of growth, manufacturing outPuts are increased and the industrial structure are improved, while employment and value added are in stagnation. The major industrial agglomerations are based in Gaejin-Myun, Dasan-Myun and Ssangrym-Myun, all of which are those in which the agro-industrial complex is operated. More than half of local manufacturing finns are those which came to move in from other regions, looking for cheap labour forces, agglomeration of the related finns and the easy accessibility to transport and communication. However, such local advantages are increasingly losing due to the shortage of labour forces and the lack of industrial networks. Some policy agendas can be suggested as follows. First of all, industrial policy should attempt links with the building-up of the Daegu Technopolis and the up-grading of the local industrial structure towards the knowledge-based industries. Secondly, the local government should make efforts to establish the innovation supporting system for local firms and the industrial and residential basis.

  • PDF