• The Journal of the Korea Contents Association
• /
• v.18 no.7
• /
• pp.330-337
• /
• 2018

Recently, there has been a growing interest in user-centered smart city services. In this study, user behavior analysis was performed as a preliminary study for user - centered smart city service planning. In particular, we will use GIS based location analysis data and video ethonography methodology to derive smart city service direction and needs. In this study, the area of Daejeon Design District selected as the Smart City Test bed was selected as the survey area and the location analysis data of the traffic accident analysis system of the road traffic corporation and the fixed camera We observed user's behavior type and change with image data extracted through the technique. Location analysis data is classified according to the type of accident, and image data is classified into 11 subdivided types of user activities. The problems and specificities observed were analyzed. The user behavior characteristics investigated through this study are meaningful to provide a basis for suggesting user - centered smart city services in the future.

• Journal of the Institute of Convergence Signal Processing
• /
• v.12 no.2
• /
• pp.150-156
• /
• 2011

Smart Highway is a next generation highway that significantly improves a traffic safety, reduces incidence of traffic accidents, and supports intelligent and convenient driving environments so that drivers can drive at high speeds in safety. In order to implement smart highway, it is required to gather a large amount of data including conditions of a road and the status of vehicles, and other useful data. To provide situation information of highway, it has been gathered traffic information using optical sensors(CCTV, etc.). However, this technique has problems such as the problem of information gathering, lack of accuracy depending on weather conditions and limitation of maintenance. It needs radar system which has not effect on environmental change and algorithm processing technique in order to provide information for a safety driving to driver and car. In this paper, it is used radar with 9.4GHz to test performance of a road surface and developed radar system for detecting test. And we compared and analyzed a performance of data acquired from each radar through computer simulation.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.21 no.4
• /
• pp.50-61
• /
• 2022

Snow, rain, fog, and particulate matter interfere with the vehicle driver's vision, which causes a non-secure safety distance and an increase in speed deviation, causing repetitive large-scale traffic accidents. This study developed a road environment sensor capable of measuring 11 types of fog, snow, rain, temperature, humidity, direction of wind, speed of wind, Insolation, atmospheric pressure, fine particles, rainfall, etc. and compared the visibility measured by the infrared signal value of the development sensor. The relationship between the existing fog visibility sensor and the development sensor measurement was derived from data measured at a visibility of 500m or less that directly affects road safety.

• Journal of Korean Society of Transportation
• /
• v.27 no.4
• /
• pp.155-166
• /
• 2009

Road design safety assessment by existing tools and methods have normally been examined by expert judgements using design documents and on-site inspections. The existing methods, however, have two main problems such as insufficiency of objectiveness and inability to measure effects of accident countermeasures. This paper studies ways to develop a road safety assessment system through reviewing the IHSDM developed in USA. The crash prediction module of IHSDM calculate accident frequency and rate of roadway segments using accident prediction models and accident modification factors for safety evaluation. The methodology of evaluation and development of accident modification factors somewhat overcome the problems of the existing methods. In spite of these advantages, IHSDM could not relevantly reflect characteristics of domestic rural roadways since it overestimate the number of accidents and rate of korean rural roadways. Especially, IHSDM may not evaluate or consider land use patterns of Korean roadways, and futhermore, original environment on base conditions used to develop IHSDM may not be different from ours. The user requirements being developed for a road safety assessment system for Korean roadways include enhanced flexibility and diversity of data input-output processes.

• Korean Journal of Clinical Laboratory Science
• /
• v.47 no.4
• /
• pp.216-224
• /
• 2015

This study aims to identify the prevalence of sleep related disease in those who experienced car accidents caused by drowsy driving. To this end, a survey of usual sleep habits, polysomnography, and multiple sleep latency tests were conducted in 34 persons who experienced an accident after normal sleep (Group 1), 22 persons who experienced an accident after abnormal sleep (Group 2), and 17 persons who was proven to be normal as a result of polysomnography and had no accident (Group 3). In all, 192 persons responded to the preliminary survey and the results were compared and analyzed. Crossover analysis was conducted to test the homogeneity of statistical characteristics, and the physical characteristics by age were analyzed. In the survey of sleeping habits, there was a significance between groups in how often they woke up while asleep (p<0.01), how difficult it was to go back to sleep again after waking up from sleep (p<0.05), how early they woke up in the morning (p<0.05), how difficult it was to get up in the morning (p<0.05), how sleepy they felt in the daytime (p<0.01), and how tired they felt in the daytime (p<0.01). Furthermore, among 56 subjects who had an accident during drowsy driving, 94.6% (53 persons) were found to have sleep related diseases. This suggests that car accidents during drowsy driving is not simply caused by temporary lack of sleep but by sleep related diseases even when sleep is adequate, leading to car accidents. Therefore, this study is significant identifying the association between car accidents during drowsy driving and sleep related disorders. Furthermore, the data would be considered basic to prepare social measures against drowsy driving related to such sleep related disorders.

• Journal of Auto-vehicle Safety Association
• /
• v.12 no.4
• /
• pp.39-47
• /
• 2020

In this study, crash situations of representative bus crash types were elicited by analyzing a total of 1,416 bus repair record which were collected in 2018~2019. K-means clustering was used as a methodology for this study. Bus repair record contain the information of repair term, type of bus operation, responsibility of accident, weather condition, road surface condition, type of accident, other party, type of road and type of location for each data. Also, by checking collision parts of each bus repair record, each record was classified by types of collision regions. From this, 760 record are classified to frontal type, 363 record are classified to middle-frontal type, 374 record are classified to middle-rear type and 331 record are classified to rear type. As mentioned, k-means clustering was performed on each type of collision parts. As a result, this study analyzed the severity of bus crash based on actual bus accident data which are based on bus repair record not the crash data from the TAAS. Also, this study presented crash situation of representative bus crash types. It is expected that this study can be expanded to analyzing hydrogen bus crash and defining indicators of hydrogen bus safety.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.16 no.5
• /
• pp.96-108
• /
• 2017

The current collision warning and avoidance system(CWAS) is one of the representative Advanced Driver Assistance Systems (ADAS) that significantly contributes to improve the safety performance of a vehicle and mitigate the severity of an accident. However, current CWAS mainly have focused on preventing a forward collision in an uninterrupted flow, and the prevention performance near intersections and other various types of accident scenarios are not extensively studied. In this paper, the safety performance of Vision-Sensor (VS) and Radar-Sensor(RS) - based collision warning systems are evaluated near an intersection area with the data from Naturalistic Driving Study(NDS) of Second Strategic Highway Research Program(SHRP2). Based on the VS and RS data, we newly derived sixteen vehicle-to-vehicle accident scenarios near an intersection. Then, we evaluated the detection performance of VS and RS within the derived scenarios. The results showed that VS and RS can prevent an accident in limited situations due to their restrained field-of-view. With an accident prevention rate of 0.7, VS and RS can prevent an accident in five and four scenarios, respectively. For an efficient accident prevention, a different system that can detect vehicles'movement with longer range than VS and RS is required as well as an algorithm that can predict the future movement of other vehicles. In order to further improve the safety performance of CWAS near intersection areas, a communication-based collision warning system such as integration algorithm of data from infrastructure and in-vehicle sensor shall be developed.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.29 no.2
• /
• pp.188-196
• /
• 2023

Among marine accidents caused by bad weather, visibility restrictions caused by sea fog occurrence cause accidents such as ship strand and ship bottom damage, and at the same time involve casualties caused by accidents, which continue to occur every year. In addition, low visibility at sea is emerging as a social problem such as causing considerable inconvenience to islanders in using transportation as passenger ships are collectively delayed and controlled even if there are local differences between regions. Moreover, such measures are becoming more problematic as they cannot objectively quantify them due to regional deviations or different criteria for judging observations from person to person. Currently, the VTS of each port controls the operation of the ship if the visibility distance is less than 1km, and in this case, there is a limit to the evaluation of objective data collection to the extent that the visibility of sea fog depends on the visibility meter or visual observation. The government is building a marine weather signal sign and sea fog observation networks for sea fog detection and prediction as part of solving these obstacles to marine traffic safety, but the system for observing locally occurring sea fog is in a very insufficient practical situation. Accordingly, this paper examines domestic and foreign policy trends to solve social problems caused by low visibility at sea and provides basic data on the need for government support to ensure maritime traffic safety due to sea fog by factually investigating and analyzing social problems. Also, this aims to establish a more stable maritime traffic operation system by blocking marine safety risks that may ultimately arise from sea fog in advance.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.23 no.7
• /
• pp.775-782
• /
• 2017

The position of existing patrol ships has been decided according to subjective judgments, not purely by any reasonable or scientific criteria, because of a lack of access to marine accident positions. In this study, the optimal location of patrol ships is quantitatively determined based on historical marine accident data. The study area used included the coastal sea of Pohang in South Korea. In this study, a k-means clustering algorithm was used to derive the location of patrol ships, and then a Voronoi diagram was used to divide the region around each patrol ship. As a result, the average navigation distance for patrol ships was improved by 4.4 nautical miles, and the average arrival time was improved by 13.2 minutes per marine accident. Moreover, if the locations of patrol ships need to be changed flexibly, it will be possible to optimally arrange limited resources using the technique developed in this study to ensure a fast rescue.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.17 no.6
• /
• pp.153-172
• /
• 2018

Overloading of Commercial vehicles have been an important area of transportation as one of the main causes of pavement damage, bridge collapse, severe traffic accident, etc. In this study, we analyzed the effects of overweight prevention by analyzing overweight driving patterns and using weight sensors. First, we analyzed relevant literatures of overweight and surveyed the commercial weight sensors. Then we chose the typical type of overweight vehicles based of overweight enforcement data analysis. MEMs inclinometer weight sensor were installed to 10 test vehicles and data was collected by weight sensors and gps in real time. As a result of gross vehicle weight and axle weight analysis, it was found weight sensor could decrease overweight rate. However, since the number of samples of test vehicles is insufficient to represent the whole commercial vehicle, further studies are deemed possible through the extension test.