• Journal of Korean Society of Transportation
• /
• v.33 no.2
• /
• pp.182-191
• /
• 2015

The Korean government introduced an automated speed enforcement system (ASES), which uses traffic enforcement cameras, to counteract safety issues that are caused by speeding. As the information of the traffic enforcement camera locations is provided to the drivers via navigation systems and mobile applications in a timely manner, drivers can avoid enforcement by momentarily diminishing their speeds only near the camera locations. To prevent drivers' evasional behavior and improve the effectiveness of ASES, section control, which enforces speeding vehicles by measuring their average travel speeds over a stretch of road and checking against the speed limit, has been recently implemented. In this study, Section Speed Enforcement Zone and Comparison Zone are compared in terms of traffic stream characteristics under free flow conditions. To this end, loop detector data were obtained from the three study sites and analyzed. The study results demonstrated that drivers maintain their speeds below the speed limit over the enforcement section with a lower variance of speeds.

• Journal of Environmental Policy
• /
• v.11 no.3
• /
• pp.49-65
• /
• 2012

Road traffic noise is closely related to road traffic environment, including traffic volumes by type and travel speed. In this study, we stated some issues and analyzed the relationships between road traffic noise and traffic flow characteristics. First, in attempt to find the answer to the question "When does the loudest traffic noise occur?" we reviewed the issue in the terms of traffic flow. As a result of analyzing level of service through Korea Highway Traffic Noise model, the actual maximum noise occurred in level of service D rather than level of service E, on the capacity state. It shows that maximum noise would be most likely to occur right before and after the peak hours. Second, this paper was looking for the method of a more easy and accurate traffic speed estimation to predict traffic noise. This paper proposed sketch planning techniques of speed-volume curve by level of service on Korea Highway Capacity Manual. As a result of trend line modeling, it was judged that quadratic form is a suitable function, and coefficient of determination ($R^2$) was higher than 0.96, respectively.

• Journal of Korean Society of Transportation
• /
• v.19 no.6
• /
• pp.195-205
• /
• 2001

The objective of the paper is to analyze the traffic characteristics for freeway merging area. Freeway merging area is different from basic section due to ramp vehicles. Therefore, to understand the traffic characteristics of (leeway merging area, this study focused on two factors including critical time headway required in merging maneuver and maximum possible merging volume. In this paper, new model that adopts critical time headway instead of critical time gap in calculating the maximum possible merging volume based on probability function was developed In previous studies, for calculating the maximum possible merging volume, it was considered that merging vehicles could merge freely if a given time gap was greater than the critical time gap. Also, the critical time gap was used as the same value in all traffic flow conditions. But, a time gap required in merging maneuver could be changed, even to the same driver, because difference of relative speed varies in different traffic flow conditions. So, in some cases, the critical time gap could be insufficient value in merging maneuver. Therefore, in this study. a calculating procedure for critical time headway in all traffic flow conditions was presented. Also, the maximum possible merging volume and capacity for freeway merging area were calculated by using the previously found critical time headway.

• Journal of Korean Society of Transportation
• /
• v.29 no.3
• /
• pp.93-101
• /
• 2011

In 2008, Korea has observed total 215,822traffic accidents Although the number has decreased since then, the crash rate is still higher than those of other advanced countries. In particular, high rate of pedestrian accidents occurred on urban streets is recognized as a serious problem. The previous studies, however, are not entirely considerate of accident factors by accident type. Inspired by the fact, this study analyzes factors affecting traffic accident by accident type. Using the accident data collected on urban streets in Seodaemun-gu, this paper classifies the accidents into two groups (i.e., vehicle-vs-vehicle and vehicle-vs-person crashes), and analyzes relationships between severity and exogenous variables. For the analysis, Structural Equation Modeling (SEM) is employed to estimate relationships among exogenous factors of traffic accident by each type on urban streets. The resulting model reveals that roadway related factors are highly correlated with the severity of vehicle-vs-vehicle crashes whereas environment factors are with vehicle-vs-person crashes.

• International Journal of Highway Engineering
• /
• v.11 no.2
• /
• pp.217-228
• /
• 2009

Sections under the influence of merging in an uninterrupted facility create irregular interaction between vehicles, such as lane change, speed acceleration and deceleration because of the merging of ramp traffic flows which have traffic characteristics different from those of the main line. This causes a confused traffic flow phenomenon(turbulence), which is considered an unstable traffic characteristic between various continuous points in consideration of v conditions. In this study, in merge influence sections, detectors by lane-point were installed to create time and space-series -traffic data. The least significant difference(LSD), as the criteria for discriminating a significant speed change between points, was calculated to examine the turbulence. As a result, turbulence in merge influence section was found to change the zones of such occurrence and the seriousness levels according to traffic condition. Thus, the maximum merge influence section due to the turbulence was created in the traffic condition before congestion when traffic increases. According to characteristics of changes in speed, merge influence section was divided into upstream 100m$\sim$downstream 100m(a section of speed reduction), and downstream 100m$\sim$downstream 400m(a section of reduced speed maintenance and acceleration).

• Journal of Korean Society of Transportation
• /
• v.26 no.3
• /
• pp.85-95
• /
• 2008

The purpose of this study is to reduce a high speed driving, it is a large scale traffic accident as the most dangerous fact on the highway. So traffic accidents related to high speed driving, a number of automated speed enforcement system has been established up to now. At present automated speed enforcement system in Korea control overspeed vehicle only in the specific spot. Because the drivers generally recognize the previous stated fact. therefore, we need speed control by new system. it is necessary to establish the automated traffic enforcement system based on the travel time speed. In conclusion, we obtain the desired results about automated traffic enforcement system based on the travel time speed. it is important that the number of traffic accidents has decreased and try to secure the safety of traffic.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.8 no.1
• /
• pp.31-37
• /
• 2008

Traffic flow which is prescribed under previous traffic effect/access act is analyzed by traffic volume, V/C, mean speed on road and LOS on the intersection. These indexes based on analytical method can not consider stochastic characteristics of traffic flow. Moreover it is hard to analyze traffic flow visually in whole traffic effect area because only individual road and intersections are targeted. In this study, it is devised to show traffic flow analysis method within traffic effect area visually applying microscopic-simulation by car-following theory, and then based on this, effect analyze ways are studied according to space range plan, improvement measure establishment and etc. To execute this study, effect area is set up using V/C, and the change of traffic current around development area is analyzed using microscopic-simulation program.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.3
• /
• pp.1131-1142
• /
• 2013

This study aims to verify the applicability of TRANSIMS (TRansportion ANalysis SIMulation System) in interrupted traffic flow through calibration and validation process based on observation data; such as headway, traffic volume, speed, and travel time from Dalguberl Boulevard in Dae-gu metropolitan city. On this study, several micro-simulation parameters are derived from the calibration and validation process through performing a headway comparison and applying an ID back tracking methodology. As a result, it is figured out that actual circumstances of Korean roadway; for example, traffic volume per lane, speed, and travel time, can be applied on the TRANSIMS. Especially, it was possible to find out the influence of cell size parameter to traffic flow characteristic of simulation. However, it is hard to conclude that TRANSIMS is applicable to Korean roadway environment with studying particular target area. Therefore, additional studies; such as more case studies with various types of road, signal, and land use, will be required to localize TRANSIMS to Korea.

• Proceedings of the KOR-KST Conference
• /
• 2007.02a
• /
• pp.467-475
• /
• 2007

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2014.01a
• /
• pp.105-106
• /
• 2014

본 논문에서는 통행 시간의 측정 방법 중 하나인 CCTV를 활용한 주행 차량 조사법을 이용하여 교통량을 측정한다. 교통망의 서비스 수준을 측정하는 주요 기준인 통행 시간과 지체 시간에 대하여 알아본다. 신호등 간격이 넓어서 연속적인 교통류 특성을 갖는 곳에서 측정을 하도록 한다. 반대편의 교통류가 충분히 식별 가능한 구간이어야 하고, 구간의 끝부분에서는 유턴이 가능해야 한다. 이 방법은 측정차량의 운전수만 있으면 CCTV와 프로그램이 알아서 측정하고, 시간, 거리, 교통량을 기록할 수 있는 장비도 필요 없다.