• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.1D
• /
• pp.59-66
• /
• 2006

This study was to construct the linear density predictive models on the on-ramp junctions in urban freeway. From the analyses of the real-time traffic characteristic data, and the construction and verification of the linear density predictive models, the models showed a considerable explanatory power with the determination coefficients ($R^2$) of over 0.7 between the density and speed data. Also, they showed a considerably high correlativeness with the correlation coefficients (r) of over 0.8 between the calculated density data and the expected ones estimated by the models.

• Journal of Korean Society of Transportation
• /
• v.23 no.4 s.82
• /
• pp.71-79
• /
• 2005

Existing arterial link travel time estimation methods relying on either aggregate point-based or individual section-based traffic data have their inherent limitations. This paper demonstrates the utility of data fusion for improving arterial link travel time estimation. If the data describe traffic conditions, an operator wants to know whether the situations are going better or worse. In addition, some traffic information providing strategies require predictions of what would be the values of traffic variables during the next time period. In such situations, it is necessary to use a prediction algorithm in order to extract the average trends in traffic data or make short-term predictions of the control variables. In this research. a multi-step ahead prediction algorithm using Data fusion was developed to predict a link travel time. The algorithm performance were tested in terms of performance measures such as MAE (Mean Absolute Error), MARE(mean absolute relative error), RMSE (Root Mean Square Error), EC(equality coefficient). The performance of the proposed algorithm was superior to the current one-step ahead prediction algorithm.

• Journal of Korean Society of Transportation
• /
• v.25 no.6
• /
• pp.33-42
• /
• 2007

This research proposes strategies about providing detour route information and traffic management for flood disasters. Suggested strategies are based on prevention and preparation concepts including prediction, optimization, and simulation in order to minimize damage. Specifically, this study shows the possibility that average travel speed is increased by proper signal progression during downpours or heavy snowfalls. In addition, in order to protect the drivers and vehicles from dangerous situations, this study proposes a route guidance strategy based on variational inequalities such as flooding. However, other roads can have traffic congestion by the suggested strategies. Thus, this study also shows the possibility to solve traffic congestion of other roads in networks with emergency signal modes.

• Journal of Korean Society of Transportation
• /
• v.21 no.3
• /
• pp.97-106
• /
• 2003

When a route choice is done under uncertainty, a driver has some expectation of traffic conditions that will occur according to the route chosen. This study tries to build a framework in which we can observe the learning behavior of the drivers' expectations of the travel time under nonstationary environment. In order to investigate how drivers have their subjective expectations on traffic conditions in response to public information, a numerical experiment is carried out. We found that rational expectations(RE) formation about the route travel time can be expressed by the adaptive expectation model when the travel time changes in accordance with the nonstationary process which consists of permanent shock and transient shock. Also, we found that the adaptive parameter of the model converges to the fixed value corresponding to the route conditions.

• Journal of Korean Society of Transportation
• /
• v.13 no.3
• /
• pp.99-120
• /
• 1995

가속차선이 교통류의 운영상태와 안전에 기여하는 바는 벌써부터 인식되어 왔으나 이 변속차선이 유입형 연결로 접속부 전체의 운영에 미치는 영향을 수치화하거나 체계적으로 평가하기 위해 현장 자료를 바탕으로 한 실험적 연구는 진행되어 오지 못하엿다. 현재 널리 참고되고 있는 1985년 USHCM의 접속부 운영상태 분석 방법론은 단지 차선 1의 교통량을 예측하는 데 주안점을 두고 있는데 가속 차선의 길고 짧음에 따라 접속부 바로 전 차선 1의 교통량 분포가 크게 변화한다는 사실(많은 현장 관측을 통해 확인)은 고려하지 못하고 있다. 이는 접속부 운영 상태가 같은 교통량 조건하에서도 크게 차이가 나나다는 것을 뜻하며 가속차선의 존재를 무시한채 운영과 관련한 MOE를 도출하는 것이 서비스수준 산정 방법으로 충분한 것인가 하는 의문을 자연히 낳게 한다. 본 논문은 가속차선이 고속도로 연결로 접속부의 운영에 미치는 영향을 주로 다루고 있다. 가속차선의 독립적인 역할과 영향을 체계적으로 관찰하기 위해 미국내 여러 지역에서 8개의 고속도로 연결로접속부를 선택하고 각 지점에 접속부의 상하류 지역을 포함하는 2,000ft 구간내에 다섯대의 카메라를 설치, 지점별로 약 3시간 동안 자료를 수집하였다. 총 193개 자료수의 분석을 통해서 다중 회귀 모형을 구성하는 독립변수로 가속차선의 길이를 사용하는 것이 타당하다고 결론지었으며, 접속부 운영의 질, 특히 속도를 추정하기 위한 모형을 수립하였다. 본 연구를 통해 얻어진 관점과 방법론은 1994USHCM 고속도로 연결로 분석 방법론 설정에 일부분 반영되고 잇으며 특히 교통운영과 흐름의 방식에서 유사한 엇갈림 구간의 분석 방법과 일관성 있는 분석 체계 마련을 위해서 서비스수준 산정 절차 정립에 엇갈림 알고리즘을 활용하는 방안을 제시하였다.

• Journal of Korean Society of Transportation
• /
• v.27 no.1
• /
• pp.157-167
• /
• 2009

This study deals with the turn penalty functions in the urban transportation demand forecasting. The objectives are to develop the penalty functions of left-turn traffic in the case of signalized intersections, and to analyze the applicability of the functions to the traffic assignment models. This is based on the background that the existing models can not effectively account for the delays of left-turn traffic which is bigger than that of through traffic. In pursuing the above, this study gives particular attention to developing the penalty functions based on the degrees of saturation by simulation results of Transyt-7F, and analyzing the applicability of the functions by the case study of Cheongju. The major findings are the followings. First, two penalty functions developed according to the degrees of saturation, are evaluated to be all statistically significant. Second, the results that the above functions apply to the Cheongju network, are analyzed to be converging, though the iteration numbers increase. Third, the link volumes forecasted by turn penalty functions are evaluated to be better fitted to the observed data than those by the existing models. Finally, the differences of traffic volumes assigned by two functions, which are exponential and divided forms, are analyzed to be very small.

• Journal of Korean Society of Transportation
• /
• v.26 no.4
• /
• pp.111-121
• /
• 2008

Using variable speed limits (VSL) is a key strategy for preventing traffic accidents and alleviating traffic congestion. This study proposes an algorithm to operate VSLs on freeways for traffic safety. The proposed algorithm consists of two components based on accident likelihood estimation and analysis of safe stopping distance under various environmental conditions. A binary logistic regression technique is used for estimating accident likelihood. It is expected that the proposed algorithm would be successfully applied in practice in support of an integrated traffic and environmental condition monitoring system. Technical issues associated with the field implementation are also discussed.

• Journal of Korean Society of Transportation
• /
• v.27 no.2
• /
• pp.83-91
• /
• 2009

This paper aims to predict air passenger and air freight demands in the air routes between South and North Korea. The air demands will be fostered by the visitors of Pyeongyang and Baekdu Mountain, whose forecasts will be used for supplying the air traffic services necessary for the active exchange and cooperation between South and North Korea in the future. The authors use the tool of regression analysis under the assumption of epoch-making progress in demand for aviation in accordance with the exchange and cooperation scenario between South and North Korea. After predicting the total number of travelers through regression analysis, the authors applied the share of air passengers among total travelers in order to predict the number of air passengers. Finally, the number of flights of each airport and route were forecasted by including the air freight, estimated from the number of air passengers.

• Journal of Korean Society of Transportation
• /
• v.22 no.3 s.74
• /
• pp.109-125
• /
• 2004

In recent decades, microscopic simulation models have become powerful tools to analyze traffic flow on highways and to assist the investigation of level of service. The existing microscopic simulation models simulate an individual vehicle's speed based on a constant free-flow speed dominantly specified by users and driver's behavior models reflecting vehicle interactions, such as car following and lane changing. They set a single free-flow speed for a single vehicle on a given link and neglect to consider the effects of highway design elements to it in their internal simulation. Due to this, the existing models are limitted to provide with identical simulation results on both curved and tangent sections of highways. This paper presents a model developed to estimate the change of free-flow speeds based on highway design elements. Nine neural network models were trained based on the field data collected from seven different freeway curve sections and three different locations at each section to capture the percent changes of free-flow speeds: 100 m upstream of the point of curve (PC) and the middle of the curve. The model employing seven highway design elements as its input variables was selected as the best : radius of curve, length of curve, superelevation, the number of lanes, grade variations, and the approaching free-flow speed on 100 m upstream of PC. Tests showed that the free-flow speeds estimated by the proposed model were statistically identical to the ones from the field at 95% confidence level at each three different locations described above. The root mean square errors at the starting and the middle of curve section were 6.68 and 10.06, and the R-squares at these points were 0.77 and 0.65, respectively. It was concluded from the study that the proposed model would be one of the potential tools introducing the effects of highway design elements to free-flow speeds in simulation.

• Journal of Korean Society of Transportation
• /
• v.34 no.3
• /
• pp.234-247
• /
• 2016

As the necessity of the evaluation of environmentally-friendly traffic operations strategies becomes obvious, the characteristics of fuel consumption models should be comprehended in advance. This study selected three fuel consumption models developed in Korea and another three models widely used in North America, and compared their applicabilities. Specifically, the national institute of environmental research (NIER) drive modes and the VISSIM software were utilized to model various driving patterns, and their fuel consumptions were estimated using the fuel consumption models. Based on the results, all the models showed the similar results in the analysis of the most fuel efficient cruising speed. On the other hand, caution should be taken when using the KR-1 and KR-2 models in microscopic analyses because they are not sensitive to instantaneous power requirements of vehicles.