• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.39 no.6
• /
• pp.859-867
• /
• 2019

Severe weather conditions, such as heavy snowfall, rain, heatwave, etc., may affect travel behaviors of people and finally change traffic patterns in transportation networks. To deal with those changes and prevent any negative impacts on the transportation system, understanding those impacts of severe weather conditions on the travel patterns is one of the critical issues in the transportation fields. Hence, this study has focused on the impacts of a weather condition on travel patterns of public transportations, especially when a heavy snowfall which is one of the most critical weather conditions. First, this study has figured out the most significant weather condition affecting changes of public transport ridership using weather information, card data for public transportation, mobile phone data; and then, developed a decision-tree model to determine complex inter-relations between various factors such as socio-economic indicators, transportation-related information, etc. As a result, the trip generation of public transportations in Seoul during a heavy snowfall is mostly related to average access times to subway stations by walk and the number of available parking lots and spaces. Meanwhile, the trip attraction is more related to business and employment densities in that destination.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.3 no.3
• /
• pp.19-26
• /
• 1983

Through traffic utilization of left turn lane constitutes an unique traffic operation at an intersection. Consequently, due to the provision as of current practice, conventional methods which estimate traffic volume and intersection capacity by lane would not be valid for design of signal timings. Through traffic utilization factor of left turn lane is affected by left turn volume and signal timings. The primary purpose of this study is to compare the results from leading left turn green phasing scheme with those from previously studied lagging left turn green phasing scheme in terms of utilization factor and intersection capacity by various left turn volume and signal timings, and thereby optimum signal timing to maximize the capacity at given left turn volume. Leading left turn green phasing increases capacity by 10~15 % as compared with that for current lagging left turn green phasing scheme. The range of optimum cycle length for left turn volume about 150 vph is 180~200 second. This cycle length range and left turn interval are longer than those for the lagging left turn green phasing scheme.

• The Journal of the Acoustical Society of Korea
• /
• v.9 no.3
• /
• pp.5-10
• /
• 1990

This study was examined for traffic noise by platoon dispersion in relation to traffic flow till platoon reach steady driving condition after starting from stopline. Platoon dispersion factor was calculated and evaluated by the following input data : traffic volume, travel time, pass time.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2019.05a
• /
• pp.1-2
• /
• 2019

일반적인 해상교통 분석 방법은 대상 항만의 항적 데이터를 기반으로 데이터를 추출한 후 모델을 구축하며, 구축된 모델을 바탕으로 해상교통 현상을 재현하고 있지만, 이러한 방법은 항로 혹은 통항량 변동 등의 변화에 따른 교통류를 예측할 수 없어 그 활용에 제약이 많다. 본 논문에서는 기존의 해상교통 분석 사례를 통해 교통 특성 모델의 요소를 식별하고, 이를 동적인 해상교통 환경을 시뮬레이션 할 수 있는 에이전트 기반의 교통류 생성 기술 개발의 기초 자료로 활용하고자 한다.

• Tunnel and Underground Space
• /
• v.13 no.3
• /
• pp.235-243
• /
• 2003

Recent worldwide trends show that tunnel length is getting longer, and the demand for longitudinal ventilation system with jet-fans in highway tunnels has also increased mainly due to the economic reasons. Improvements in vehicle engine subsequently reduced required ventilation rate(Qreq) which is the decisive factor in choosing the optimal ventilation system. Qreq contour map is a graph that defines the relationship among tunnel length, grade and required ventilation rate. It is important to understand the variation of Qreq in order to evaluate the characteristics of ventilation system with jet fans. Therefore this study aims at studying a graphical method for determining the characteristics of jet-fm ventilation system using Qreq contour map. Also, this study focuses on traffic composition on local highways.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.9 no.4
• /
• pp.68-79
• /
• 2010

Weather like rain, strong wind or snowfall may make the road condition deteriorated and sometimes induce traffic accidents, which lead to severe traffic congestion, thereby travelers may change their destinations elsewhere. Although origin-destination trip information is required to analyze transportation planning in urban area, there are little researches on the relationship between weather condition and travel patterns. This paper investigates the characteristics of travel patterns on expressway in snowing days of 1998-2008. We compare the normal travel patterns with those of snowing days by the travel distance for each vehicle type. Results show that traffic volume and travel distance have been reduced in snowing days as we expect, and also show different travel patterns for weekday and weekend.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.14 no.6
• /
• pp.21-36
• /
• 2015

These days Automated Vehicle(AV) has been receiving attention as a fundamental solution to resolve the various transportation problems and various researches related to the benefits of AV have been done. However, previous researches mainly analyzed the effects in the virtual network. The purpose of this research is to predict and to find out the benefits by introducing the Automated Vehicle to present road traffic system. Thus, the study analyzes the traffic-flow changes of Gyeongbu freeway Seoul-Singal basic section which is planned for setting the test-bed. The results show that Automated Vehicle can have negative effects on the traffic-flow in low volume of LOS A and B. However, the average speed increases and the traffic density decreases in more than LOS C, the traffic volume increase. Therefore, the introduction of Automated Vehicle achieves positive effect on various transportation problems such as the traffic congestion.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.26 no.7
• /
• pp.759-766
• /
• 2020

In recent years, the maritime traffic environment has been changing in various ways, and the traffic volume has been increasing constantly. Accordingly, the requirements for maritime traffic analysis have become diversified. To this end, traffic characteristics must first be analyzed using vessel trajectory data. However, as the conventional method is mostly manual, it requires a considerable amount of time and effort, and errors may occur during data processing. In addition, ensuring the reliability of the analysis results is difficult, because this method considers the subjective opinion of analysts. Therefore, in this paper, we propose an automated method of traffic network generation for maritime traffic analysis. In the experiment, spatiotemporal features are analyzed using data collected at Mokpo Harbor over six months. The proposed method can automatically generate a traffic network reflecting the traffic characteristics of the experimental area. In addition, it can be applied to a large amount of trajectory data. Finally, as the spatiotemporal characteristics can be analyzed using the traffic network, the proposed method is expected to be used in various maritime traffic analyses.

• International Journal of Highway Engineering
• /
• v.11 no.3
• /
• pp.121-128
• /
• 2009

This study has proposed the signal operating system to use both semi-actuated signal control and pedestrian push-button as a way to make up for the problems of 3 leg intersections which are operated inefficiently in the signal operation, one of the methods of traffic operations. In case of the semi-actuated signal control, it can reduce delay inside the intersection by serving to uncongested traffic on the main road where there is not much traffic volume on the secondary road and push-button signal can reduce unnecessary waiting time it could happen to vehicles by operating it though there is no pedestrian. Quantitative analysis was tried regarding the average delay reduction per vehicle using VISSIM, microscopic simulation program regarding how much effect it has compared with the existing signal control system and semi-actuated signal control system when the above two advantages are collected. The field test was performed for one three-leg intersection of Incheon. According to respectively signal control method pedestrian traffic changed and executed a sensitivity analysis. The result which compares the average delay time per a vehicle of scenarios, the signal control method of using the pedestrian push-button system in comparison with the fixed signal control method showed to decrease effect of a minimum 3.7 second (10%), a maximum 5.8 second (16%). When the pedestrian traffic volume was 20% or less of the measurement traffic volume, The signal control method of using the pedestrian push-button system appeared to be more efficient the semi-actuated signal control with object intersection.

• Journal of Korean Society of Transportation
• /
• v.29 no.5
• /
• pp.157-167
• /
• 2011

Many problems, such as unexpected delay and collision with pedestrians or vehicles, occur generally at signalized intersections where bicycle users are frequently involved. These problems have hindered bicycle users from riding bicycles on urban highways. The aim of this study is to suggest proper traffic signal operation methods for safe and convenient highway crossing of bicycles. Three types of crossing methods at signalized intersections are proposed and analyzed: (1) indirect left turn, (2) direct left turn on an exclusive bicycle lane, and (3) direct left turn on a bicycle box. The VISSIM simulation tests were conducted based on fifty-four operation scenarios prepared by varying vehicle and bicycle traffic volumes. Both delay and the number of stops are used as the measures of effectiveness in the analysis. The results from the three-legged signalized intersections suggested that (1) the indirect left turn is appropriate when vehicle demand is high while bicycle demand is not, (2) direct left turn on an exclusive bicycle lane is appropriate when both vehicle and bicycle demands are high, and (3) direct left turn on a bicycle box is appropriate when both vehicle and bicycle demands are light.