• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.2
• /
• pp.711-718
• /
• 2013

Traffic pavement markings are one of primary transportation facilities that provide drivers with various road information directly. Thus, a clear understanding of traffic pavement markings is utmost important to improve traffic safety as well as to establish a proper traffic culture. However, no past studies examined drivers' understanding of traffic pavement markings in Korea. Hence, this study investigated drivers' understanding of traffic pavement markings through an elaborated administrated survey, and analyzed the relationship between various drivers' characteristics and understanding regarding pavement marking via cross-classification table and logistic model. The analysis results show that drivers have limited understanding regarding the purpose of the markings. Specifically, the average understanding of pavement markings is 57.41%: the lowest understanding is 25.88% for yield pavement marking, and the highest understanding is 91.18% for advanced pedestrian crosswalk pavement marking. This study also revealed that the understanding of some pavement markings are somewhat influenced by user group such as drivers with suspended or revoked driver licenses, but the overall understanding of pavement markings are not significantly affected by drivers' characteristics such as gender and driving experiences at ${\alpha}$=0.05. Thus, it might be desirable for policy makers to establish pavement marking-related policies for overall drivers rather than specific drivers.

• Proceedings of the KOR-KST Conference
• /
• 1998.10a
• /
• pp.342-351
• /
• 1998

노면표시는 운전자에게 시선유도와 각종 규제 및 지시에 대한 정보를 제공함으로써 교통안전 및 소통에 도움을 주는 시설로써 주야간의 시인성 확보가 중요하며 이를 위해서는 반사화가 필요하다. 노면표시의 반사성능은 유리알 (Glass Bead)의 함량 및 종류, 용융온도, 도료의 색도등 각 영향인자에 의해 결정되지만 현재는 시공법 및 관련 연구의 미흡으로 현행기준의 최하수준을 상회하는 정도로 제공되고 있다. 따라서 본 연구에서는 노면표시의 시공에 관계되는 각 요인중 반사성능가 내구성에 영향을 미치는 주요인자 및 반사성능을 최적화하기 위한 인자별 최적조합을 도출하였다. 연구결과 유리알 살포량이 중량비로 25%-30%, 용융시 온도가 $188^{\circ}C$$\pm$$10^{\circ}C$일 때 노면표면시의 반사성능이 최적화됨을 밝혀내었다. 또한 유리알의 품질개선과 함께 황색 노면표시의 재귀반사 휘도계수 기준을 현재 기준보다 상향조정할 필요성이 있음을 제안하였다.

• Korean Journal of Construction Engineering and Management
• /
• v.7 no.6
• /
• pp.79-89
• /
• 2006

Current removing process is labor intensive and time consuming, employing a conventional grinding type manual machine. From a social and economic point of views, these kinds of manual tasks bring about social inconvenience and economic loss including traffic jam and high labor costs. The objective of the study was to develop and evaluate a road stripe removal equipment using water jet technology. The following shows the results. First, It was analyzed that the obtainable productivity from the equipment developed in the study is 280% compared to the current equipment. In this study, it was also calculated the Benefit/Cost Ratio and the result showed that the ratio is 3.28, so it is expected that the equipment can produce great benefits for the relevant companies. Second, an analysis was also conducted on the traffic congestion cost, and the equipment could save about \2,550 million per day compared to the conventional equipment. Therefore, it is analyzed that the economic viability of the equipment is sufficient.

• Journal of Korean Society of Transportation
• /
• v.34 no.3
• /
• pp.248-262
• /
• 2016

The study documents the analysis on characters and symbols shown in the pavement markings in the perspective of mathematics educators. The purpose of this study is to propose a pavement marking method that can enhance readability from the driver's eye position. To this end, this study analyzed the figure of the pavement markings that can be actually recognized by the projective geometry perspective. As a result, it proposed alternatives to the current pavement markings by introducing the concept of the compression ratio. Results of the study are as follows. First, the rule was established to obtain the compression ratio. If the observation of two viewing angles are x and y, then the compression ratio S is ${\sin}y/{\cos}\(\frac{x-y}{2}\)$. Second, we presented two alternatives to the pavement marking method for the displayed information. One is a method for improving the pavement markings in terms of the compression ratio, the other is a method by varying vertical length of the pavement markings while holding its width constant. Based on the outcomes from this study, a mathematical analysis can be further studied for the perception of speed according to the types of pavement marking line.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.34 no.1
• /
• pp.185-194
• /
• 2014

This study investigates the methodology to evaluate the quantified performance of pavement markings and traffic guide signs using digital images. This methodology is significant to attempt to quantify their performance without large brightness photometer at the nighttime and bad weather. The retroreflective performance of pavement markings are evaluated through the contrast of gray levels of pavements and markings in collected digital images under the case of rain, dampness, and dryness. In addition, the appraisal of retroreflective performance of traffic guide signs are implemented through the comparison between interior illuminated and the existing retroreflective traffic guide signs using the contrast of luminance extracted from the value of RGB of backgrounds and legends in collected digital images according to geometric design, driving lanes, and the distance between the car and the sign. As a result, the retroreflective performance of pavement markings deteriorates about 3.5 times and 2 times under the case of rain and dampness respectively than dryness. Also, the performance of the existing traffic guide signs is significantly influenced by geometric design, driving lanes, and the distance, otherwise interior illuminated traffic guide signs. This methodology can be utilized to construct objective information of performance of traffic safety facilities to select appropriate position of expensive high reflective pavement markings and interior illuminated traffic guide signs considering diverse weather and geometric design.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.2D
• /
• pp.245-253
• /
• 2009

Road facility is the most fundamental infrastructure for traffic and various information for smooth traffic is included in road surfaces. Various information included in road surfaces should be often removed and reinstalled by partial damage and aging. In addition, the existing road surface information should be removed in order to mark new information as traffic information changes. The existing road surface removal method suing grinders and torches had problems such as dangerous working equipment and workers' direct exposure to cars. In addition, although water-jet system using super high-pressure water was used to remove road surface in order of improvement of traditional method, there are another problems such as limitations according to water-tanks and water frost on the road surfaces after work. Therefore, this study analyzes and suggests systems to develop prototype after analyzing dry ice blaster in order to improve the current road surface removal methods. In addition, the study analyzes the possibility of introduction of dry ice blaster through a test for proposing an automatized equipment for new road surface mark removal considering environment and work efficiency, and compare traditional method with introduced dry ice blaster for operating cost.

• Proceedings of the Korea Contents Association Conference
• /
• 2017.05a
• /
• pp.205-206
• /
• 2017

교통사고나 안전사고로 인한 중증 피해자를 사망으로부터 지켜내기 위해서는 앰뷸런스가 병원으로까지 환자를 이송하는 "골든타임(Golden time)"이 중요하다. 본 연구는 사람들에게 미리 "라이프 라인(Life Line)"을 시각적으로 알려줌으로써, 복잡한 도로에서 응급상황이 왔을 때 자연스럽게 앰뷸런스의 길을 터 주어 빠른 시간 안에 환자를 병원까지 이송하도록 하는 응급도로 표시를 연구하였다. 현재 설치되어 있는 도로 노면표시 중 기존차량에 관한 노면표시를 살펴보고 응급차량 관련 새로운 노면표시 디자인의 가이드 라인을 제시하였다.

• Korean Journal of Construction Engineering and Management
• /
• v.7 no.5
• /
• pp.149-158
• /
• 2006

Current removing process is labor intensive and time consuming, employing a conventional grinding type manual machine. This manual tasks trigger various dangers such as unexpected traffic accidents or explosions of propane gas used for finalizing removing process, leading to health damage and environment pollution by dusts and noxious gases. Accordingly, it is necessity for the development of new alternative equipment. In this paper, we have developed a prototype equipment for road stripe removing made up with a high-pressure water-jet system as a mobile type system. The following shows the results. First, an analysis of the current road stripe removal process showed that it can be divided into a) preparation, b) removal and c) ground finishing. It also showed that the b) removal process requires equipment which can cover the whole process. Second, the study compared between the productivity of the developed equipment and conventional methods, and it obtained 280% productivity improvement compared to the conventional equipment.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.37 no.5
• /
• pp.815-825
• /
• 2017

Visibility of lane marking is impaired at night or in the rain, which thereby threatens traffic safety. Recently, various studies and technologies have been developed to improve lane marking visibility, such as the extension of lane marking life expectancy (up to 1.5 times), improvement of lane marking equipment productivity, improvement of lane marking visibility by applying phosphorescent material mixed paint. Cost-benefit analysis was performed with considering various benefit items that can be expected. About 45% of traffic accidents would be prevented by improving lane marking visibility. Additionally, accident reduction benefit and traffic congestion reduction benefit were calculated as much as 246 billion KRW per year and 12 billion KRW per year, respectively, by reducing repaint cycle due to enhanced durability. 45 billion KRW per year is expected to reduced with improved lane detection performance of autonomous vehicle. Meanwhile, total increased cost when introducing phosphorescent material mixed paint to 91,195km of nationwide road is identified as 1922 billion KRW per year. However, economic feasibility could not be secured with 0.16 of cost-benefit ratio when applied to the road network as a whole. In case of "Accident Hot Spot" analyzing section window (400m), one or more fatality or two or more injured (one or more injured in case of less than 2 lanes per direction) per year were caused by pavement marking related accident, economic feasibility was secured. In detail, 3.91 of cost-benefit ratio is estimated with comparison of the installation cost for 5,697 of accident hot spot and accident reduction benefit. Some limitations and future research agenda have also been discussed.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.36 no.4
• /
• pp.685-694
• /
• 2016

Visibility of lane marking is impaired at night, or in case of rain, and thereby threatens traffic safety. Recently, various studies and technology have been developed to improve lane marking visibility, such as the extension of lane marking life expectancy (up to 1.5 times), improvement of lane marking equipment, improvement of lane marking visibility (32.7%) by applying phosphorescent material mixed paint, and expressway lane design standards alternative (length 6m, gap 12m, width 13cm: 27.8% of painted surface are reduced) adoption with ergonomic analysis. In this study, a set of cost-benefit analyses was performed for the cases where such techniques were applied. Based on the literature review, 26.9% of traffic accidents would be prevented by improving lane marking visibility by 32.7%; accident reduction benefit was calculated as much as 12.5 billion KRW. Meanwhile, total increased cost when introducing phosphorescent material mixed paint and lane design standards alternative is calculated as 30.6 billion KRW. However, economic feasibility could not be secured with 0.41 of cost-benefit ratio when applied to the expressway network as a whole. Additionally, cost-benefit (B/C) analysis was applied to each of the top 20 night accident hot spots and the results of B/C ratios were between 0.67 and 4.20, showing that 11 out of 20 spot sections of expressway can have economic feasibility. This results indicate, with this kind of pavement marking applied to accident hot spots in rural expressway, better visibility and economic feasibility can be guaranteed through traffic accident reduction. Some limitations and future research agenda have also been discussed.