• Journal of Navigation and Port Research
• /
• v.27 no.1
• /
• pp.97-102
• /
• 2003

Wire ropes are used in a myriad of various industrial applications such as elevator, mine hoist, construction machinery, lift, and suspension bridge. Especially, the wire rope of crane is important component to container transfer. If it happens wire rope failures during the operation, it may lead to safety accident, economic loss by productivity decline and so on. To solve this problem, we developed remote wire rope fault detecting system, and this system is consisted of 3 parts that portable fault detecting part, signal processing part and remote monitoring part. All detected signal has external noise or disturbance according to circumstances. So, we applied to discrete wavelet transform to extract a signal from noisy data. It is verified that the detecting system by de-noising has good efficiency for inspecting faults of wire ropes in service. As a result, by developing this system, container terminal could reduce expense because of extension fo wire ropes exchange period and could competitive power. Also, this system is possible to apply in several field such as elevator, lift and so on.

• Journal of Bio-Environment Control
• /
• v.20 no.4
• /
• pp.333-340
• /
• 2011

This study was conducted on the effect of plant growth retardants (PGRs) on growth of potted Ardisia pusilla and Ardisia pusilla var. variegata grown for a short term in an ebb and flow system. Plants were planted in 10 cm plastic pots, containing a mixture of peat moss and perlite (1 : 1, v/v) on 30 June 2005 and were grown until 23 Sep. 2005. The PGRs used were 50, 200, 350, 500 $mg{\cdot}L^{-1}$ daminozide (B- 9), 10, 40, 70, 100 $mg{\cdot}L^{-1}$ paclobutrazol (Boundy), and 5, 15, 25, 35 $mg{\cdot}L^{-1}$ ethephon (Florel). On every irrigation, the nutrient solution containing PGRs was supplied at a 2 cm depth and was kept for 15~20 minutes. The surplus nutrient solution was drained back into the tank for next irrigations. In both cultivars, paclobutrazol gave the most pronounced effect in inhibition of stretchiness. Ardisia pusilla, which was pinched just before initiation of paclobutrazol treatment, resulted in the greatest inhibition of shoot elongation. Daminozide treatments above 200 $mg{\cdot}L^{-1}$ also gave reduction of shoot length. However, ethephon treatments gave no dwarfing effect in Ardisia pusilla. Inhibition of stretchiness was observed even in the lowest concentration treatments. Among the PGRs, paclobutrazol was the most effective in suppressing plant stretchiness.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.20 no.2
• /
• pp.110-121
• /
• 2016

In the decision-making, such as selection of structure, construction method, or time and scheme of maintenance, the evaluation of life-cycle cost(LCC) is of great importance. The maintenance cost occupy a large portion of the LCC of the railway track as well as the initial construction cost. Futhermore, the proportion of the maintenance cost is much higher in the ballasted track. Thus, the importance of the LCC evaluation is higher than in any other engineering structures. In this study, a LCC model that can consider various design parameters such as the type of track structure, annual traffic volume, axle load, train speed, and proportion of curve sections and engineering structures has been developed. Fundamental data for calculating costs also have been presented. Based on the model and data proposed, the trends in the variation of LCC according to the design parameters were examined and the most important design parameters in the LCC analysis of railway track were investigated. The results show that the proportion of renewal and operational costs is much higher in the ballasted track than in the concrete track, and the annual traffic volume and ballast taming period are most significant factors on the LCC of the ballasted track. On the contrary, it is revealed that the proportion of the initial construction costs in the concrete track is much higher, and the LCC of the concrete track is less sensitive to the traffic volume, train speed, and axle load.

• Korean Journal of Plant Tissue Culture
• /
• v.27 no.3
• /
• pp.203-211
• /
• 2000

In this study to produce large-scale scopolamine we were examined in the tumor calli of Datura metel L. induced by Agrobacterium tumefaciens $Ery{101}$. The growth and scopolamine contents of tumor calli were higher under light condition than in dark. The optimum condition of growth and scopolamine production were fluence rate of 16 $\mu$mol $m^{-2}s^{-1}$, spectra of red light region and 16 hour light periods on 50 mL SH liquid medium in 4 weeks culture. To increase of the scopolamine contents in tumor calli, the optimum concentration of nitrogen source were 1.8 mM NH$_4$+ and 40 mM NO$_3$. The optimum elicitor concentration for production of scopolamine were 10 mg/L chitosan and 15 mg/L yeast extract. The effect of precursors were good at the concentration of 0.2 mM tropine and 0.3 mM tropic acid, respectively. In order to increase of growth and scopolamine contents. we induced mutant from Datura metel L. tumor callus. Mutants of tumor calli were obtained by 3 Krad, 4 Krad and 6 Krad of ${60}^Cor-ray$. Among them, 3 Krad tumor callus was excellent on the growth and teratoma induction. The 4 Krad tumor callus was negligible for both growth and teratoma induction. But the 6 Krad tumor callus was the best in growth and teratoma induction. The formation of the mutant calli can be enhanced through hormonal combination of 1 mg/L 2,4-dichlorophenoxyacetic acid and 0.5 mg/L benzyladenine. We carry out selection mutant tumor calli for high content tropane alkaloid and suspension cultures for scopolamine production.

• Fire Science and Engineering
• /
• v.33 no.2
• /
• pp.114-123
• /
• 2019

The paper relates to a study on the changes in performance of insulation sheath resulting from accelerated degradation of IV and HIV insulated wire. To assume insulation degradation of IV and HIV insulated wire, accelerated life tests using Arrhenius equation were conducted among accelerated life test models, and experimental samples of 0 year, 10 years, 20 years, 30 years, and 40 years in equivalent life were produced. Whereas the maximum tensile load were increased as accelerated degradation of IV and HIV insulated wire progressed, elongation percentage, rupture time, and flexibility of insulated wires were found to be gradually reduced. According to the additional surface analysis results for the insulated wires per equivalent life using a scanning electron microscope, mechanical properties of the insulator were observed to be reduced as insulation degradation resulting from aging progressed since phenomena such as formation of crystalline structures and perforation, etc. occurred on the sample surface with progression of accelerated degradation. Consequently, institutional replacement of insulated wires and preparation of repair times considering performance degradation of the insulator installed inside buildings are considered necessary in order to prevent in advance the risks of electrical fire resulting from degradation in insulation performance.

• Journal of Environmental Impact Assessment
• /
• v.27 no.6
• /
• pp.595-603
• /
• 2018

This study was conducted to understand the growth of attached microbial community in small and medium streams of Gyeonggi-do and the removal efficiency of fluoride with changes in growth. The sites monitoring were carried out for 12 weeks at the P1 and P2(P1 is the point where the discharge water flows. P2 is the downstream point of about 2 km flow), and investigated the water quality and the biomass analysis of the attached microbial community. The growth of the attached microbial community increased up to the 7th investigation, and it was observed that detachment phenomenon occurred. Influencing factors about growth of the attached microbial community were flow rate, velocity, and organic material(T-N & T-P). Meanwhile, fluoride content of attached microbial community also tended to increase until the 7th investigation, and decrease from the 8th. It is assumed that fluoride content has also be reduced with the detachment phenomenon of the attached microbial community. It is expected that this will contribute to the evaluation and management of the use of attached microbial community as a means of stream management. The application of techniques using the attached microbial community should include basic investigation of factors that may affect the growth of the attached microbial community and replacement of the attachment plate according to the time of removal.

• Cross-Cultural Studies
• /
• v.42
• /
• pp.165-203
• /
• 2016

This study attempted to reconsider the existing viewpoint on the history of Pansori transmission and suggested a new viewpoint on lostPansori transmission. Untill now, lost seven songs have been criticized for failure in Pansory's transmission history because it ceased to satirize negativity of abnormal character without creating a bearer of new value goals in the new age this paper resulted in another conclusion which extends Pansori history's process to modern times in the point of succession and duration of Pansori esthetics. Currently the above reason creats a problem ofcomplete nonmention that confront Pansori's twelve songs which does not apply to lost seven songs. If the evaluation standard of literary history used for lost seven songs is applied to inherited five songs, The inherited five songs also failed in the esthetic cultural history of present times. To resolve this issue, this study suggested a new viewpoint to replace the existing viewpoint that label Pansori's history as a historical structure consisting of success of inherited five songs and failure of lost seven songs repetitive replacement cycle of float and flow. This study provided constructive on lost Pansory of premodern times and presented entire Pansori as a flowing state. This paper futher identified the stages of decline the lost seven songs since the 20thcentury but sets the stage or finding a new qualitative possibility. This new theory was suggested through extant aspects of the movie that was a reproduction of in the present media age.

• Journal of Conservation Science
• /
• v.37 no.2
• /
• pp.154-166
• /
• 2021

The royal seal, in either gold or jade, is used to symbolize Joseon's royal family, and it is made up of a Bonu (a handle), Bosin (a body), Bomun (a letter inscribed on the seal), and Bosu (a string attached to the seal). The Bosu was designed to enhance the seal's dignity and facilitate convenient handling. Bosu consists of Kkeun-mog and Bangwool-sul (decorated with gilt paper), which are made of Bangwool, Bangwool-mog, and Sul. In this study, the form survey, color, material, and composition of 318 Bosu pieces from the Joseon Dynasty and Korean Empire produced from 1441 to 1928 were analyzed. As time passed, the strings on the seals became longer and thinner. Bangwool-mog disappeared from the mid-1800s, and a ring appeared at the end of the Sul. Most of the colors used were scarlet, but orange and purple were also identified. Although most of the Bosu are silk, five Bosu from the 1900s and one Bosu from the 1740s (likely replaced in the 1900s) are estimated to be rayon. The gilt paper's main chemical components used to decorate the Bangwool-sul vary according to age. Until the mid-1800s, gold (Au) was used for the Sul and Bangwool, but since the mid-1800s, gold (Au) and brass (Cu-Zn) were used for Sul and Bangwool, respectively, and then brass (Cu-Zn) was used for Sul and Bangwool. While the Bosu was a seal accessory, it can be used to identify changes in the manufacturing techniques and materials of the period.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.26 no.6
• /
• pp.93-101
• /
• 2022

RC Slab bridges in Korea account for more than 70% of the total bridges for more than 20 years of service. As the number of aging structures increases, the importance of safety diagnosis and maintenance of structures increases. For highway bridges, cracks are a main cause of deck deterioration, which is very closely related to the decrease in bridge durability and service life. In addition, the damage rate of expansion joints and bearings accounts for approximately 73% higher than that of major members. Therefore, this study defined damage scenarios combined with devices damages and deck deterioration. The stress distribution and maximum stress on the deck were then evaluated using design vehicle load and daily temperature gradient for single and combined damage scenarios. Furthermore, this study performed damage-spread analysis and predicted condition ratings according to a deck deterioration model generated from the inspection and diagnosis history data of cracks. The heterogeneous damages combined with the member damages of expansion joints and bearings increased the rate of crack area and damage spread, which accelerated the time to reach the condition rating of C. Therefore, damage to bridge members requires proper and prompt repair and replacement, and otherwise it can cause the damage to bridge deck and the spread of the damage.

• Journal of radiological science and technology
• /
• v.31 no.1
• /
• pp.55-60
• /
• 2008

Purpose: This study is to decide a quality control and calibration period of LCD display devices used for reading diagnostic images. Materias and Methods: The assessment test of 20 flat panel LCD color display devices used for reading diagnostic images were performed based on AAPM TG 18 protocol over the total six sessions at one month intervals from three months after primary calibration, in terms of geometric distortion, reflection test, luminance response evaluation, luminance uniformity, resolution, noise, veiling glare and chromaticity test. Results: The results of geometric distortion, reflection test, luminance uniformity, resolution, noise, veiling glare and chromaticity test were within the criteria recommended by AAPM TG 18, except for luminance response evaluation. In the measured luminance deviation of luminance response evaluation, 4(25%) of 20 display devices were passed a criterion from four months after calibration, and 11 (55%) were passed from eight months. Also in the contrast response of the luminance response evaluation, 1(5%) display device was passed a criterion from four months after calibration, and 3(15%) were passed from eight months. Conclusion: Considering the passing deviation after calibration, the time required and a manpower, the quality control and calibration period of LCD display devices used for reading diagnostic images should be a three months and six months after calibration.