• Journal of Korean Society for Quality Management
• /
• v.34 no.4
• /
• pp.93-101
• /
• 2006

Robust parameter design is an off-line production technique for reducing variation and improving the quality of products and processes by using product arrays. However, the use of the product arrays usually requires a large number of runs. To overcome the drawback of the product array, the combined array can be used. Also optimizing multiple responses is increasingly important in industry. Using simultaneous optimization measures, we can deal with the multiple response case. In this paper we compare the simultaneous optimization using the Taguchi's product array with using the combined array. And models possible to set on combined arrays are also investigated and compared with the cases of product arrays.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.41 no.8
• /
• pp.119-124
• /
• 2004

In this paper, we are designed and fabricated circular polarization microstrip patch antenna of 5［GH］z bandwidth for the wireless LAN and the ISM. We are proposed new structure that removed the section which intersected at a right angle and were composed to four separated slots. The antenna of proposed structure could solve parasitic elements from intersected in a right angle and weak coupling efficiency from asymmetry between feed line and a slot. The proposed cross slots antenna is easily impedance matching and increased impedance bandwidth. Also this is increased efficiency and a bandwidth of antenna and reduce back lobe of radiation pattern. We designed 2${\times}$2 array antenna of 5［GHz］ band. It took impedance bandwidth 280［MHz］(VSWR < 1.5) and gam 12.5［dBi］

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.5
• /
• pp.853-859
• /
• 2007

This paper presents a microstrip patch array antenna having transmission feed and reception feed for satellite communication in the Ku band. In this paper, the element of the patch array antenna is a three-stacked structure consisting of one radiation patch and two parasitic patches for high gain and wide bandwidth characteristics. To obtain higher gain, the unit elements are expanded into a $1{\times}8$ may using a mixture of series and parallel feeds. The proposed antenna has horizontal polarization for the Rx band and vertical polarization for the Tx band. To verify the practicality of this antenna, we fabricated a three-stacked patch array antenna and measured its performance. The gain of the array antenna in the Rx and Tx bands exceeds 17 and 18 dBi, respectively. The impedance bandwidth is over 10 % in both bands. The cross-polarization level is below -25 dB, and the sidelobe level is below -9.4 dB.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2009.05a
• /
• pp.51.2-51.2
• /
• 2009

본 실험에서는 레이저 간섭 리소그래피를 이용한 2차원 나노 패턴을 형성하였고, 수열합성법을 이용하여 90 도에서 ZnO 나노 기둥을 ZnO/Si 기판 상에 제작 하였다. ZnO 버퍼층은 스퍼터를 이용하여 200도, Ar 분위기에서 증착 하였으며, 레이저 간섭 리소그래피를 이용하여 두 번의 노광을 통해 2차원 나노 패턴을 형성하였다. 먼저, 최적화된 포토레지스트를 ZnO/Si 기판 위에 도포하고, 2500rpm에서 30초간 스핀코팅 한 후, 첫번째 노광을 실시 하였고, ZnO/Si 기판을 회전시켜 첫번째 노광과 교차 시킨 다음 두 번째 노광을 통해 교차하는 부분만 현상되도록 하였다. 기판의 회전 및 기판과 입사 레이저 사이의 각도를 조절하여 제작된 나노 패턴의 종류는 square lattice, centered rectangular lattice, oblique lattice, hexagonal lattice, rectangular lattice, 5가지로, 2차원의 모든 격자를 제작 하였다. 저온 수열합성법에서는 Na citrate를 형상제어제 (surfactant ions)로 사용하여 ZnO 나노 기둥을 형성하였다. $NH_4OH$를 이용하여 용액의 pH를 조절하였고, Zn nitrate hexahydrate를 Zn의 원료 물질로 사용하였다. 2차원 나노 패턴의 3차원 형태는 Atomic force microscopy (AFM, Veeco instruments, USA)를 이용하여 접촉 모드에서 관찰하였고, ZnO 나노 구조는 주사 전자 현미경 (FE-SEM, Model: JSM-6701F, Tokyo, Japan) 를 통하여 분석 하였다. 나노 패턴의 AFM 분석 결과 ZnO/Si 기판상에 포토레지스트가 주기적인 배열을 가지는 것을 확인하였고, ZnO/Si 기판상에 포토레지스트가 완전히 현상된 부분이 일정한 배열을 가지는 것을 확인하였다. 포토레지스트가 현상되어 기판의 표면이 드러난 부분의 크기는 약 250nm로 측정되었다. ZnO 나노 구조의 FE-SEM 분석 결과, 각각의 나노 구조가 나노패턴 중 완전히 현상된 부분만을 통하여 성장되었다는 것을 확인하였고, 형상 제어제로 사용된 Na citrate의 첨가 여부에 따라 나노 구조의 모양이 변화되었다는 것을 알 수 있었다. Na citrate 가 첨가된 나노 기둥의 경우 약 500nm의 길이를 가지는 하나의 기둥 형태로 성장하였다는 것을 확인하였다.

• The Journal of Korean Academy of Prosthodontics
• /
• v.57 no.1
• /
• pp.31-36
• /
• 2019

As the number of elderly population increases, the proportion of edentulous patients is increasing, and the demand for traditional dentures will also increase. Arranging the artificial teeth according to the relationship and shape of the upper and lower alveolar ridge is an important factor increasing the stability of the denture. This case is a 79 year old female patient who wishes to make denture covered by national health insurance for psychological and economical reasons. With the alveolar bone severely atrophic, the dental CAD software was used for accurate diagnosis and the posterior teeth were arranged in a cross bite according to the interalveolar crest line angle by the program. After completion, the denture showed adequate stability and maintenance in periodic examinations and treatment, and the patient also expressed high satisfaction.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.12
• /
• pp.1316-1324
• /
• 2009

In this paper, cross-aperture coupled microstrip circular polarization antenna is proposed for 5.8 GHz WLAN(Wireless Local Area Network). A single antenna consists of square patch and slots are located in series feed line with $\lambda_g$/4 phase different which make current direction maximum and minimum repeatedly to generate RHCP(Right Handed Circularly Polarization). We are proposed new structure that removed the section which intersected at a right angle and were composed to four separated slots. The proposed cross slots reduce back lobe of radiation pattern and improve antenna gain. Impedance bandwidth of the manufactured $2\times2$ array antenna is from 5.67 to 5.95 GHz and the maximum radiation gain is 10.59 dBi.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.37 no.1
• /
• pp.53-59
• /
• 2000

We propose a modified nonlinear fiber optic interferometer which can serve to generate binary optical pulse sequences for CDMA networks, and to decode them. In one arm cross-phase modulation between a CW signal and a counter- or copropagating high-power pulse takes place in sequences of segment connected via VDM couplers. Preliminary experimental results on code generation as well as autocorrelation and crosscorrelation are presented, using Sagnac interferometer. As we expected, the experimental results show that the outputs of the interferometer device are not summed simply on the basis of power, but the sin-squared version of it. Arbitrary codes can in principle be implemented.

• The Journal of Korean Academy of Prosthodontics
• /
• v.57 no.3
• /
• pp.304-311
• /
• 2019

After the teeth were extracted, maxillary and mandibular alveolar ridges show the opposite resorption pattern and as a result, the mandibular arch is enlarged than maxillary arch relatively. In this situation, we should evaluate both alveolar ridge relationship and arrange the artificial teeth properly for stability of removable prosthesis. This case is a 77 years old male patient who wishes to make removable prosthesis and has atrophic alveolar ridge. By use of model scanner and CAD software, the angle between interalveolar crest line and occlusal plane was easily measured. Depending on the measurement, the artificial teeth are arranged in unilateral cross bite and after completion, patient was satisfied with the denture which showed proper stability, retention, support.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.10 no.3
• /
• pp.113-122
• /
• 2007

The rapid growth of aerial survey and remote sensing technology has enabled the rapid acquisition of very large amounts of geographic data, which should be analyzed using real-time visualization technology. The level of detail(LOD) algorithm is one of the most important elements for realizing real-time visualization. We chose the triangulated irregular network (TIN) method to generate normalized digital elevation model(DEM) data. First, we generated TIN data using contour lines obtained from a two-dimensional(2D) digital map and created a 2D grid array fitting the size of the area. Then, we generated normalized DEM data by calculating the intersection points between the TIN data and the points on the 2D grid array. We used constrained Delaunay triangulation(CDT) and ray-triangle intersection algorithms to calculate the intersection points between the TIN data and the points on the 2D grid array in each step. In addition, we simulated a three-dimensional(3D) terrain model based on normalized DEM data with real-time visualization using a Microsoft Visual C++ 6.0 program in the DirectX API library and a quad-tree LOD algorithm.

• Journal of Korean Ophthalmic Optics Society
• /
• v.14 no.4
• /
• pp.77-81
• /
• 2009

Purpose: To study the change of fixation disparity and accommodation as fusion contrast is deteriorated. Methods: 16 subjects who had above 20/20 and stereopsis took part. Monocular and binocular refraction were done with Zeiss Polatest Classic whereas the critical angle for stereopsis was done with TNO. A computer programmed with Random-Dot stereogram and vernier test managed a precise change of the fusion contrast and exposure time. Results: The fixation disparity was influenced by reduction of fusion contrast and had tendancy to exophoria (p=0.0004), especially it is considerably higher when uncrossed disparity was shown to exophoric subjects. Although accommodation was not influenced by a change of fusion contrast (p=0.803), vernier acuity was influenced (p=0.0000). Conclusions: Exophoric trend arose as the fusion contrast was reduced, nevertheless there was no accommadative change.