• Journal of Aerospace System Engineering
• /
• v.13 no.1
• /
• pp.47-53
• /
• 2019

To improve an aerodynamic characteristic of the eVOTL aircraft, Korea Aerospace Research Institute (KARI) performed a validity test of the cross-rotating propeller technology. First, CFD analysis was carried out and an idea of the cross-rotating propeller to imply on a multi-copter confirmed with a commerce pitch control multi-copter that has two different blades, 0.11 and 0.21 m. After verifying the idea, a multi-copter with about 3 kg maximum take-off weight (MTOW) was custom designed to complete a ground test to measure thrust and noise. The test was performed with 15 and 22 in. propellers at the identical tip speed. The test results show that the 22 in. propeller with the cross-rotating technology required about 30 % less power and reduced 3~5 dB aerodynamic noise as compared to 15 in. propeller without cross-rotating.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.2D
• /
• pp.209-215
• /
• 2011

Roundabout has circular traffic island in the intersection center and is kind of intersection where the automobile bypass circular traffic island. In Korea, the provisional Roundabouts Design Guidelines were published in 2004 by MLTM (Ministry of Land, Transport and Maritime Affairs). This guideline did not discussed domestic traffic circumstance. It just only introduced foreign instances and their guidelines. In addition, the recent National Competitiveness roundabouts as part of the green growth has been concentrated on the interest. In this paper, 90 degree of the 4-legged roundabout was compared with 72 degree, 45 degree, and 30 degree 5-legged roundabouts by micro simulation VISSIM. As a result of analysis, average travel time is decreased when the inscribed circle diameter become bigger the roundabout. 5-legged roundabout until 2,000 volume per hour evaluated to be similar effect at 90 degree of 4-legged roundabout.

• Journal of Korean Society of Transportation
• /
• v.27 no.1
• /
• pp.53-62
• /
• 2009

The purposes of the study is to comparatively analyze the applicability of roundabout to the diamond interchange. In pursuing the above, this study give the particular attentions to comparing the performances of roundabout with those of TWSC and signalized intersection based on the aaSIDRA software. The main study results are as follows. First, when the entering traffic volumes(ETV) are more than 480pcph, the single-lane roundabout is analyzed to be more effective than 4-leged unsignalized intersection and when ETV are $480{\sim}1,880pcph$, double-lane roundabout is analyzed to be more effective than 4-legged intersection Second, when ETV are more than 980pcph at the single-lane intersection and $1,600{\sim}3,680pcph$ at the double-lane intersection, roundabout is analyzed to be more effective than other 3-legged intersections. In summary, when the roundabout installs at the interchange, it is important to consider the range of ETV.

• International Journal of Highway Engineering
• /
• v.9 no.4
• /
• pp.105-116
• /
• 2007

A ROUNDABOUT is more effective way to improve safety and prevent delays than signal intersection. ROUNDABOUT has been known highly safe treatment that could be used as a method to reduce conflicts between vehicles, to reduce travel speed in inner or approach of intersection, and to have no speed difference between drivers than intersection. In this study, the effective analysis on the installation of ROUNDABOUT was carried out using computer-based simulation tool VISSIM, in order to evaluate performance and safety of ROUNDABOUT and develope a warrant. In conclusion, the results indicated that there was remarkable increase of Y-intersection capacity and decrese of delay, and improvement of traffic safety. Finally, A nice feature of this study is to firstly attempt to use microscopic simulator to evaluate the effectiveness of ROUNDABOUT and suggest a passible operation boundary.

• International Journal of Highway Engineering
• /
• v.12 no.4
• /
• pp.79-86
• /
• 2010

This study deals with the roundabout installed at the diamond interchange. The goal is to analyze the relative effectiveness of roundabout to signalized intersection. In pursuing the above, this study gives the particular attentions to comparing the performances using VISSIM software. The main results analyzed are as follows. First, the single and double roundabouts are analyzed to have the rapid change of delay in the case of total entering vehicles of more than 2,400pcph for directional rate 10:5:5, 2,800pcph for 10:8:2, and 4,400pcph for 10:2:8. Second, the roundabouts are evaluated to be more effective than signalized intersection in the case of total entering vehicles of less than 4,000pcph for directional rate 10:5:5, and 4,400pcph for 10:2:8. In the case of directional rate 10:8:2, double roundabout of total entering vehicles less than 5,600pcph is analyzed to be more effective than signalized intersection. Finally, the performance of double roundabout is analyzed to be very similar to that of single roundabout in the case of total entering vehicles less than 4,400pcph. However, the double roundabout is evaluated to be more effective than single in the case of total entering vehicles more than 4,400pcph.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.20 no.5
• /
• pp.45-58
• /
• 2021

It is generally known that a two-lane roundabout has some problems in safety such as increasing conflicts, typically merging and diverging conflicts and conflicts between entering traffic and exiting as well as turning traffic. To solve these problems, a turbo-roundabout had been developed and has successfully brought safer and more efficient operation in other countries. In this study, micro simulations using VISSIM were conducted to investigate the maximum value of service traffic volume. It was found that operation of turbo-roundabouts was influenced by traffic volume for each turning traffic, and the maximum values of traffic volume were values between 2,400 and 2,800 vehicles per hour as rates of traffic volume for each turning traffic. Typically, turbo-roundabouts have limited to operate in conditions with more than 30% for left-turning traffic volume.

• Journal of Korean Society of Transportation
• /
• v.31 no.6
• /
• pp.43-52
• /
• 2013

A roundabout is a form of circular intersection in which traffic travels counterclockwise around a central island and in which entering traffic must yield to circulating traffic. It has been known that a roundabout provides substantially better operational and safety characteristics than other intersections including rotaries. Recently, a roundabout has started to be constructed due to its efficiency, safety, and other advantages of a roundabout comparing other intersections in Korea. However, there has been no guideline to be used to decide appropriate intersection types considering given conditions of the intersections. To solve this problem, the guideline with traffic volume to choose the suitable intersection types was developed based on analysis results using the SIDRA software which is generally used to analyze operational effects of roundabouts. It was found that a roundabout is more efficient than signalized intersection when the traffic volume is between 125 and 450 veh/h on one lane road and roundabout is not recommended when there are more than 30% left turn traffic. The optimal traffic volume provided in this research will be usefully used in planing and designing roundabouts in Korea.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.8 no.2
• /
• pp.27-35
• /
• 2009

The roundabout was developed in the United Kingdom to rectify problems associated with these traffic circles. In 1966, the United Kingdom adopted a mandatory "give-way" rule at alt circular intersections, which required entering traffic to give way, or yield, to circulating traffic. However, the roundabout used in United States or Europe do not common use in Korea. The purposes of the study is to comparatively analyze the effectiveness of roundabout. In pursuing the above, this study designs the scenarios which can reflect the directional traffic volumes, and analyzes the average control delay of roundabout and 4-leg signalized intersection by SIDRA. The main study results are as follows. First, when the entering traffic volume are less than 2,000pcph, the single-lane roundabout is analyzed to be more effective than 4-leg signalized intersection. Second, when the entering traffic volume are less than 3,200pcph, the double-lane roundabout is evaluated to be more effective than 4-leg signalized intersection. Third, which is installed left and right turn lane at intersection, area for the roundabout is analyzed to be less than that for general intersection area.

• Proceedings of the KOR-KST Conference
• /
• 1999.10a
• /
• pp.315-320
• /
• 1999

교차로 좌회전 이동류에 대해 곡선반경의 확보여부는 용량 및 안전성측면에 많은 영향을 주게 된다. 죄회전 곡선반경의 결정은 설계기준차량의 회전궤적에 따라 결정되며 곡선반경의 모양은 원곡선의 형태를 유지하는 것이 바람직한 형태로 제시되고 있다. 교차로 설게시 곡선반경의 확보방안으로 정지선을 후퇴시키는 방안을 제시함으로서 좌회전 이동류에 대해 용량 및 안전성을 개선할 수 있도록 하였다.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.15 no.4
• /
• pp.54-67
• /
• 2016

All roundabouts are designed based on "Roundabout Design Guideline, Ministry of Land and Transportation, 2014" in Korea. The guideline also provides the traffic volume criteria to convert from signalized intersections to roundabouts. While the criteria are based on capacity of roundabouts, left-turn ratio and the number of lane on approaches are not considered to calculate the capacity of roundabouts. Therefore it is difficult to apply the traffic volume criteria in the real world. In this study, we studied the impact of left-turn ratio and the number of lane on approaches into capacity of roundabouts using micro-simulation. It was found that the capacity of roundabouts is changed according to left-turn ratio and the number of lane on approaches.