• Proceedings of the Korean Vacuum Society Conference
• /
• 1999.07a
• /
• pp.174-174
• /
• 1999

Pt(001)의 깨끗한 표면은 재배열된 (5x20) 또는 (nxn) 구조를 갖는다. 이러한 재배열된 구조는 소？의 가스를 흡착에 대해서도 (1x1)구조로 다시 재배열되는 재배열인 쉽게 풀리는 준안정적 재배열 구조를 갖는 표면이다. Pt(100) 표면 위에 Ni과 같은 금속을 흡착시키는 경우도 동일하게 표면의 장력을 해소시켜 (1x1) 표면을 만든다. Pt와 Ni과 같은 덩어리 상태에서 Pt와 Ni가 질서있게 교차되어 배열되는 합금이 쉽게 이루어지는 물질들로 잘 알려져 있고, 이 합금은 Pt나 Ni와 동일한 규칙적인 fcc 구조를 갖는다. 따라서 Pt(100) 표면 위에 Ni를 흡착시키는 것은 Nm/Cu(100)과 같은 표면합금이나 Mn/Ag(1000에서 보이는 2층으로 된 표면 합금과 같은 표면 근방에 국한된 질서있는 표면 합금의 가능성이 있다. 또한 Ni/Pt(100)은 Ni과 Pt가 3대 1의 비로 조합될 때 나타나는 Ni3Pt의 층별구조인 표면에 Ni가 채워져 있고, 다음 층에 Ni와 Pt가 50%씩 질서 있게 섞여 있는 형태의 구조 즉 표면 밑 합금이 나타날 수 있는 가능성이 있는 물질계라는 점에서 관심을 갖게 한다. 본 연구는 LEED를 이용하여 Ni/Pt(100) 박막의 층별구조를 확인하고자 한다. PtNi 합금은 ATA(average t-matirx approximation)을 이용한 LEED 분석이 잘 적용되는 물질계로 알려져 있고, 본 연구는 ATA를 적용한 LEED I/V 분석을 통하여 Ni가 성장된 Pt(100) 표면의층별 농도비와 층별 구조를 구하고자 한다. 실험은 기본 압력이 3x10-11torr인 챔버에서 이루어졌으며, 증착시 압력은 5x10 torr이고, 증착은 열증발 방법을 이용하였다. Ni가 증착됨에 따라 (nxn) 재배열 표면에 기인한 extra spot들의 세기는 점차 감소하고 특정 증착량 이상에서부터 이 (nxn)의 spot들이 사라지고 깨끗한 (1x1) 패턴이 나타난다. 계속되는 증착량의 증가에 대해서도 이 (1x1) 형태는 유지되며, 표면의 질서에 따르는 c(2x20 패턴은 보이지 않았다. (1x1) LEED spot를 보임에도 불구하고 덩어리 절단 형태의 구조를 기반으로 한 LEED I/V 분석으로는 잘 맞출수 없었다. 이것은 Ni가 일정 이상 흡착된 경우 그 구조가 덩어리 절단 형태의 fcc(100) 구조와 벗어난 구조를 가지는 것으로 보인다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.24 no.6
• /
• pp.586-594
• /
• 2013

This paper proposes a new coupling element of microwave slot coupler for designing waveguide slot array which can reduce the effect of undesired higher order mode coupling between coupling and radiating slots in the branch waveguide. The proposed device is composed of a centered longitudinal shunt-series coupling slot at the center of broad wall shared by two crossed rectangular waveguides and an asymmetric compound iris that excites the coupling slot. We first have obtained scattering parameters for the proposed coupler by use of EM S/W tool HFSS and then extracted the parameters of T- network equivalent circuit for the coupling slot. We also have analyzed the resonant properties such as resonant length and normalized admittance by changing the geometrical dimensions. The measured results for the fabricated coupler with short-circuited block ${\lambda}_g/4$ away from the coupling slot are well agreed with the simulated ones.

• Geophysics and Geophysical Exploration
• /
• v.1 no.2
• /
• pp.92-100
• /
• 1998

Array CSAMT surveys were conducted in two areas where it was not easy to identify the presence of faults only with geological survey because of thick overburden. The purpose of these surveys were to locate the faults and to delineate the deep resistivity structures around the faults. The steep dip lineaments having high contrast in resistivity laterally and the low resistive zones having some width in the resistivity sections were interpreted as faults and fracture zones associated with faults, respectively, The good applicability of array CSAMT to the investigation of fault was recognized owing to the agreement between the interpretation results of array CSAMT and the conclusive evidences collected by the following geological survey. The evidences includes the recent exposure of fault and the trajectory of fault evidences of the survey line. A comparison of the applicabilities of array CSAMT method and the resistivity method using dipole-dipole array was presented with the results of both methods along a same traverse line.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.49 no.7
• /
• pp.23-29
• /
• 2012

The LC-based digitally controlled oscillator (LC-DCO), a key component of the all digital phase locked loop (ADPLL), is designed using $0.18{\mu}m$ RFCMOS process with 1.8 V supply. The NMOS core with double cross-coupled pair is chosen to realize wide tuning range, and the PMOS varactor pair that has small capacitance of a few aF and the capacitive degeneration technique to shrink the capacitive element are adopted to obtain the high frequency resolution. Also, the noise filtering technique is used to improve phase noise performance. Measurement results show the center frequency of 2.7 GHz, the tuning range of 2.5 GHz and the high frequency resolution of 2.9 kHz ~7.1 kHz. Also the fine tuning range and the current consumption of the core could be controlled by using the array of PMOS transistors using current biasing. The current consumption is between 17 mA and 26 mA at 1.8V supply voltage. The proposed DCO could be used widely in various communication system.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.27 no.12
• /
• pp.1112-1115
• /
• 2016

Global Positioning System(GPS) is a useful system used in both civilian and military applications. However, the signal of GPS is susceptible to jamming attacks due to low receive sensitivity, since the signals come from the satellite located at over 20,000 km above the earth. In this paper, we have conducted a preceding research on a non-Foster matching circuit that efficiently matches an electrically ultra-small GPS antenna. Electrically Small Antennas(ESAs) are inefficient radiators and are difficult to match in wideband due to extremely high quality factor. In order to match small GPS antenna in wideband, a non-Foster matching circuit for a small GPS antenna was designed. A negative impedance converter circuit consisting of Linvill's cross-coupled pair transistors was fabricated and its stability was verified by the time-domain stability analysis. In addition, anechoic chamber measurements show that the non-Foster matching circuit for small GPS antenna can lead bore-sight gain improvement by more than 17 dB.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.11
• /
• pp.1659-1666
• /
• 2010

In this study, a new type of wire-woven cellular metal named WBD(wire-woven bulk diamond) was developed. Like WBK(wire-woven bulk Kagome), WBD is composed of helically formed wires; WBK was introduced a few years ago, and its mechanical, thermal properties, and engineering applications have been extensively investigated. The number of wires that pass by one another at each cross point in WBD is four, whereas that in WBK is three. The mechanical behavior of WBD subjected to compression was investigated and the results were compared to those for WBK. For a given slenderness ratio the density and yield strength of WBD were about twice as high as those for WBK, but elastic stiffness of WBD was not that higher than that for WBK.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.46 no.5
• /
• pp.37-43
• /
• 2009

Streaming video service over wireless and mobile communication networks has received significant interests from both academia and industry recently. Specifically, mobile WiMAX (IEEE 802.16e) is capable of providing high data rate and flexible Quality of Service (QoS) mechanisms, supporting mobile streaming very attractive. However, we need to note that streaming videos can be partially deteriorated in their macroblocks and/or slices owing to errors on OFDMA subcarriers, as we consider that compressed video sequence is generally sensitive to the error-prone channel status of the wireless and mobile network. In this paper, we introduce an OFDMA subcarrier-adaptive mobile streaming server based on cross-layer design. This streaming server system is substantially efficient to reduce the deterioration of streaming video transferred on the subcarriers of low power strength without any modifications of the existing schedulers, packet ordering/reassembly, and subcarrier allocation strategies in the base station.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.41 no.7
• /
• pp.81-88
• /
• 2004

In case of mechanical down tilting, a horizontal pattern is distorted and beam width widens whenincreasing tilt angle, which causes an expansion of hand off region and burden base station equipment. In contrast, electrical down tilting has advantage that horizontal HPBW is kept constant with down tilting. In this paper, based on a phased array technology, dual polarized base station antenna with electrical down tilting was developed at 800MHz band. The antenna has down tilting range of 0$^{\circ}$ to 14$^{\circ}$, and 15㏈i gain. We use stacked microstrip patch as a radiated element and apply balanced feed technique to improve isolation between ports and discrimination of cross polarization. The effect of electrical down tilting was verified by field test.

• The Journal of the Acoustical Society of Korea
• /
• v.24 no.5
• /
• pp.294-300
• /
• 2005

Generally, traditional approaches to track the target position are to estimate ranges and bearings by 2-D MUSIC (MUltiple 519na1 Classification) method. and to associate estimates of 2-D MUSIC made at different time points with the right targets by JPDA (Joint Probabilistic Data Association) filter in the near field. However, the disadvantages of these approaches are that these have the data association Problem in tracking multiple targets. and that these require the heavy computational load in estimating a 2-D range/bearing spectrum. In case multiple targets are adjacent. the tracking performance degrades seriously because the estimate of each target's Position has a large error. In this paper, we proposed a new tracking algorithm using Position innovations extracted from the senor output covariance matrix in the near field. The proposed algorithm is demonstrated by the computer simulations dealing with the tracking of multiple closing and crossing targets.

• The Journal of the Acoustical Society of Korea
• /
• v.35 no.2
• /
• pp.102-109
• /
• 2016

This paper proposes a noise suppression method through SNR (Singal-to Noise Ratio) estimation in the two microphone array environment of close spacing. The conventional method uses a noise suppression method for a gain function obtained through the SNR estimation based on coherence function from full band. However, this method cause performance decreased by the noise damage that affects all the feature vector component. So, we propose a noise suppression method that allocates a frequency domain signal into N constant multi frequency band and each frequency band gets a gain function through SNR estimation based on coherence function. Performance evaluation of the proposed method is shown by comparison with PESQ (Perceptual Evaluation of Speech Quality) value which is an objective quality evaluation method provided by the ITU-T (International Telecommunications Union Telecommunication).