• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2012.05a
• /
• pp.315-316
• /
• 2012

전기도금법으로 제조한 $Ni-TiO_2$ 복합체에 교반 속도가 전류효율에 미치는 영향을 연구하였다. 교반은 공기를 불어넣은 공기교반과 자석막대를 회전시킨 자석교반으로 나누어 실시하였다. 교반 속도는 공기교반의 경우에는 0.5, 1.0, 1.5 L/min, 자석교반의 경우에는 100, 200, 300, 400, 500 rpm으로 변화시켜 $Ni-TiO_2$ 복합체의 전류효율과 순수 니켈의 전류효율 변화를 관찰하였다. 순수 니켈의 경우 전류효율이 두 종류의 교반 방식 모두, 속도가 높아질수록 다소 감소하였으나, 그 폭이 크지 않았다. 반면, $Ni-TiO_2$ 복합체의 경우에는 교반 속도가 높아지면, 전류효율이 급격히 감소하였다. 특히, 공기교반의 경우에는 1.0L/min에서 1.5L/min으로 교반속도가 증가하면 전류효율이 크게 감소하였다.

• Journal of Korean Society of Environmental Engineers
• /
• v.38 no.3
• /
• pp.150-153
• /
• 2016

This study evaluates the efficacy of titanium tetrachloride ($TiCl_4$) on phosphorus (P) removal in synthetic wastewater. Jar test experiments were performed at various $TiCl_4$ concentration (0.25-0.59 mM), and intensities of slow (30-60 rpm) and rapid (100-250 rpm) mixings to determine the conditions at which P removal was most efficient. The P-removal efficiency was highest (about 99%) at $TiCl_4$ concentration $([TiCl_4])=0.39mM$ with rapid-mixing intensity=100 rpm and slow-mixing intensity=30 rpm. The slow-mixing intensity was more sensitive than the rapid-mixing intensity to the P removal efficiency when [$TiCl_4$] was low ($0.25{\leq}[TiCl_4]{\leq}0.27mM$).

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.34 no.3
• /
• pp.51-59
• /
• 2006

The physical characteristics of autonomic microcapsules manufactured with various agitation speeds in a stirred tank were observed experimentally by a particle size analyzer and an optical microscope. The flow characteristics in a stirred tank were also investigated through a 3-dimensional numerical simulation to understand the manufacturing process of autonomic microcapsules. According to the results, we found that the agitation speed was the important factor to determine the sizes of microcapsules. The impeller-induced flow allowed the jet and tip-vortex pair components in the mixed fluid of a stirred tank. The vorticity around the blades in the impeller was increased as increasing the agitation speed. In addition, the size of autonomic microcapsules was strongly affected on the small scale mixing pattern such as a tip-vortex pair.

• Resources Recycling
• /
• v.27 no.1
• /
• pp.45-54
• /
• 2018

This study aimed to investigate the effects of mechanical factors such as agitation speed and air rate in fly ash flotation. Specifically, we used thermal power plant fly ash with unburned carbon content of 3.4 to 3.7%. The effect of pH, agitation speed, collector dosage, and frother dosage - the key factors of froth flotation - showed unburned carbon recovery and unburned carbon content of 63% and 34%, respectively, when the dosage of safflower oil used as collector was 800 g/ton, pH was 7, agitation speed was 1,200 rpm, and frother dosage was 400 g/ton. The SEM/EDS analysis of fly ash in that case indicated that the spherical fly ash particles lowered the unburned carbon content as they floated with the air bubbles without being dissolved in the unburned carbon or settled in the ore solution. The other experiment of changing the mechanical factors such as agitation speed and air rate resulted in unburned carbon recovery and unburned carbon content of 74% and 67%, respectively, at air rate of 8 L/min and agitation speed of 900 rpm. The recovery and unburned carbon content increased as the low agitation speed and additional air injection decreased the strength of the eddy current in the ore solution and consequently prevented the floating of fine fly ash particles with unburned carbon. In addition, the recovery rate and unburned carbon increased further to 80% and 70%, respectively, showing the best performance when the agitation speed and air rate were lowered to 800 rpm and 6 L/min, respectively.

• Proceedings of the KWS Conference
• /
• 2010.05a
• /
• pp.64-64
• /
• 2010

최근 그린 친환경, 지구온난화방지와 환경 부하물질저감, 기기 고효율화, 연비향상 등의 관점에서 항공기, 자동차 등 운송기계와 휴대용 전자제품 등 경량화가 요구되는 분야에서 경량합금의 사용이 급증하고 있다. 특히, 경량합금 중 가장 가벼운 마그네슘 합금은 최근 주목을 받고 있는 금속재료이다. 그러나 마그네슘합금은 알루미늄합금과는 달리 상온 성형성 및 접합성이 양호하지 않은 관계로 판재를 이용한 구조부품의 제작을 위해서는 많은 연구가 필요하다. 이러한 관점에서 본 연구는 마그네슘합금 판재의 마찰 교반 점용접을 시도하였다. CNC 밀링머신을 사용하여 프로브의 회전 및 삽입 속도에 변화를 주어 접합 특성을 평가하였고, 각 변수의 영향을 조사하였다. 적외선 열화상기와 로드셀을 사용하여 마찰 교반 점용접 중에 발생하는 교반부 온도와 접합부에 가해지는 수직부가하중의 거동을 측정하였다. 마찰 교반 점용접 후, 시험편의 접합 상태와 접합부 단면 관찰을 통해 접합 상태를 조사하였다. 그리고 인장전단 실험을 실시하여 마찰 교반 점용접된 시혐편의 접합강도를 평가하였고, 파단된 시험편의 파면을 관찰하였다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.10
• /
• pp.1347-1353
• /
• 2011

Friction stir welding (FSW) method has extensively been used in manufacturing methods because of the several advantages over conventional welding methods, such as better mechanical properties, reduced occurrence of joining defects, high material saving, and low production time, etc. The aim of this paper is to review the optimal FSW conditions using the previous experimental results and is to investigate the fatigue crack growth rate in three different zones, WM, HAZ and BM for FSWed Al7075-T651 aluminum plates. As far as our experiments are concerned, the optimal conditions are obtained as rotation speed, 800rpm and travelling speed, 0.5mm/sec. The fatigue crack growth rate showed strong dependency on three different zones WM, HAZ and BM, and crack driving force.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.28 no.4
• /
• pp.69-75
• /
• 2020

This study was conducted to improve the solid-liquid separation efficiency of clarifiers. To do so, the study did a bio-flocculation experiment simply by controlling the stirring speed (rpm) and baffle angle of a clarifier on a lab scale, but without using a coagulant. For the purpose of the experiment, the feed wall of a clarifier was so improved that a baffle could be installed on the clarifier. Then, it was ensured to change its stirring speed (to 0.0rpm, 0.6rpm, and 1.2rpm), with the angle fixed at 10°. As a result, it was found that concentration efficiency increased by 2.0%, and effluent removal efficiency (SS concentration) by 7.8%, at a stirring speed of 0.6ppm. This indicates the bio-coagulation efficiency of sludge increased with changing stirring speeds. Then, the baffle angle of the sedimentation unit was changed to analyze how the changed baffle angle would affect the sedimentation of sludge. As a result, it was found that the compression of sludge interface was very effective at a baffle angle of 20°. It is hoped that these experimental findings will be useful in improving the sedimentation efficiency of circular clarifiers.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.9 no.2
• /
• pp.191-196
• /
• 1999

Effects of agitation and heating rate on crystallinity, size distribution and mean size of $\alpha$-$SiO_2$powder prepared hydrothermally were investigated. $\alpha$-$SiO_2$crystalline powder, in mean particle size of 1~3.2 $\mu\textrm{m}$, was obtained at $350^{\circ}C$ using KOH as a mineralized for a 3 h reaction. Experimental results showed that particle size became smaller as the rate of agitation increased if it was introduced from the beginning of reaction, however, crystallinity was reduced at the low rate of agitation and it was became enhanced at above 150 r/min. Particle size became larger if agitation was introduced at any time during the reaction rather than introduced from the beginning of reaction. It was also found that particle size became smaller if heating rate was reduced, while the rate of agitation kept constant.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2002.09a
• /
• pp.319-322
• /
• 2002

그라우팅으로 지반 개량된 조간대 퇴적층의 지층구조를 규명하기 위한 방법으로 전기비저항탐사, 굴절법 탄성파탐사, 지하레이더탐사를 실시하였다. 연구대상 지반의 10m 전후 심도에서 해수의 영향을 받는 수평의 저비저항대가 발달하며, 저비저항대는 모래가 우세한 지층에 해당한다. 지반의 탄성파 속도는 1~3km/sec의 범위로 조간대의 미고결 퇴적층과 비교할 때 매우 높은 속도에 보여준다. 지반의 높은 속도는 지반 개량의 효과로 판단된다. 지하레이더탐사에서 퇴적층의 구성 물질에 따라 교반 정도가 달지는데 모래층은 퇴적물과 주입제의 교반이 잘 이루어져 불규칙한 반사면으로 나타나며, 점토층은 교반이 불량하여 개량된 부분은 주상으로 관찰된다. 물리탐사의 결과와 시추조사를 대비할 때 지반 개량은 기반암까지 시행되었으며, 양호한 암반을 지시하는 고비저항대와 고속도층은 내륙으로 갈수록 깊은 심도를 보여준다. 이것은 지반 개량 이전의 기반암 심도와는 상반되는 것으로 지반 개량의 효과는 해안방면의 지층에서 잘 나타난다.

• Applied Chemistry for Engineering
• /
• v.4 no.3
• /
• pp.537-543
• /
• 1993

The effect of agitation on liquid-liquid dispersion was investigated in an immisible liquid phase(n-hexane/water) system. Four different types of six-bladed turbine impellers were used: a flat blade, two screen blades and a solid edged 60 mesh screen blade. We found that the extent of dispersion of organic phase and power consumption of agitator were decreased in the order of flat, solid edged, 60 mesh, and 40 mesh blades at same agitation speed. And the minimum agitation speed for complete dispersion of organic phase was increased with increasing volume fraction of organic phase. Also, mean diameter of liquid droplets of dispersed phase was decreased with increasing agitation speed and it was increased in the order of solid edged, flat, 60 mesh, and 40 mesh screen blades at same agitation speed. At complete dispersion, the minimum power consumption was not vary significantly with impeller blade types, but the solid edged screen blade impeller gave the smallest and uniform sizes of liquid droplets, and it had a good performance for liquid-liquid dispersion. In this condition, Power number was not affected by Reynolds number and it was constant in turbulent flow region, and Sauter mean diameter($d_{32}$) of liquid droplets was expressed as a function of volume fraction of organic phase(${\phi}$) and Weber number($N_{We}$) as follows: $d_{32}/D=a(1+b{\phi})N_{We}{^{-0.6}}$.