• Journal of Korea Multimedia Society
• /
• v.16 no.7
• /
• pp.852-861
• /
• 2013

When users use medical volume rendering applications, selecting specific region of volume data and observing the region by magnification is a common process.As the wood-grain artifact is arise from the magnified image, the jittered sampling technique has been used to remove the problem. However, the jittered sampling leads to some noise along the volume edge. In this research, we reveal the reason of the noise, and present a solution. To remove the wood-grain artifact without the noise, we propose the empty space jittering and the sampling alignment method. Using these methods, we can produce high quality volume rendering images without noticeable time consuming.

• Journal of the Korean Geotechnical Society
• /
• v.17 no.4
• /
• pp.259-267
• /
• 2001

실내시험으로 구한 점토의 공학적 성질은 샘플링, 운반, 저장, 그리고 성형과정 동안에 발생하는 시료의 교란으로 인해 원지반의 성질과 다르게 측정된다. 본 연구에서는 양산점토에 대한 삼축압축시험($CK_{o}$ UC) 결과를 이용하여 샘플링 방법에 따른 교란의 정도를 평가하였다. 실험에 사용된 시료는 76mm 튜브샘플러, 76mm 피스톤샘플러, 블록샘플러로 채취되었으며, 시료의 교란정도를 평가하기 위해 각 시료에서 측정된 체적변형률, 비배수 전단강도, Secant Youngs modulus, 그리고 파괴시 간극수압계수를 비교하였다. 시료의 교란정도를 평가하는 것 이외에도 SHANSEP 방법을 이용하여 수행한 $CK_{o}$ U 삼축압축시험 결과를 이용하여 양산점토에 대한 정규화 전단강도($C_{u}$ /$\sigma$$_{vc}$ )와 OCR 관계를 규명하였다. 또, 피에조콘 관입시험, 딜라토메타 시험, 그리고 현장 베인시험결과를 이용하여 구한 양산점토의 비배수 전단강도를 삼축압축시험 결과와 비교하였다.

• KIPE Magazine
• /
• v.8 no.6
• /
• pp.46-48
• /
• 2003

• 제어로봇시스템학회:학술대회논문집
• /
• 1987.10b
• /
• pp.537-540
• /
• 1987

항공기가 평형상태로 비행하는 도중 돌풍과 같은 외부교란을 만난 교란상태운동은 선형화된 미분방정식으로 표현되며 비교적 짧은 비행시간동안의 비행은 선형시 불변계가 된다. 돌풍은 Gauss-Markov확률과정으로 모델링 되며, 항공기가 돌풍을 만난 교란상태운동은 시스템론적으로 보면 백색잡음이 성형필터를 거쳐 계에 입력되는 것과 같다. 초기의 설계방법은 고전적인 주파수영역에서의 해석방법을 사용하였으나 1960년대에 최적제어이론이 도입되면서 평가함수를 사용하여 원하는 비행특성을 얻는 방법을 사용하게 되었다. 그 후 계에 입력되는 외란과 측정시의 잡음으로 인한 불확실한 측정량으로부터 최적상태변수의 추정을 위해 필터링이론을 도입한 확률제어이론을 적용하여 자동조종장치를 설계하게 되었다. 이때까지는 연속제어계로 설계되었으며 그 후 측정신호를 샘플링하여 연속제어계와 등가의 이산제어계를 사용한 자동조종장치가 등장하였으며 이 경우 설계기법으로는 연속제어계를 사용하고 실현시킬 때는 디지털컴퓨터를 사용하였다. 이는 제어하는 동안 계의 계수와 제어법칙을 바꾸어 줄 수 있는 이산제어계의 장점을 이용하지 못하므로 처음부터 계를 등가의 이산계로 보고 제어계를 설계하는 방법이 도입되었다. 이 때 샘플링간격의 결정과 Quantization 영향이 설계시 고려되어야 한다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2017.05a
• /
• pp.302-307
• /
• 2017

본 연구에서 퇴사량조사 실적 및 유량-유사량 관측 자료, 상 하류 수위-유량 자료를 보유하고 있는 B 저수지를 대상으로 3차원 수치모형을 이용하여 저수지 퇴사분포를 분석해 보았다. 또한 수치모형의 검증을 위하여 저수지내 6개 지점에 대한 시추 샘플링을 통해 퇴적토의 깊이를 측정하였다. 퇴적토 샘플링시 시료의 교란을 방지하기 위하여 동일지점에서 2회 샘플링 작업을 수행하였다. 샘플링 시료는 원지반과 퇴적지반의 구분을 위하여 시료분석 이전에 각 단면별 깊이를 측정하였으며, 시료는 각 단면별로 물리적 특성시험을 통해 압밀도를 측정하여 퇴적토의 깊이를 산정하고 수치모형시 검증 자료로 사용하였다. 본 연구에서는 3차원 수리해석과 함께 유사의 이송, 침식, 퇴적현상을 연동하여 모의 가능한 Delft3D 모형을 이용하여 B 저수지에 대한 유사 이송모의를 수행하였다. 모의 결과 저수지의 하폭이 넓어지는 지형 및 만곡부 인근에서 퇴적이 진행되는 결과를 보였으며, 퇴적토 시료와 비교한 결과 퇴적토 깊이는 일부 차이가 있었으나, 퇴적분포 양상은 유사한 결과를 보였다.

• Journal of the Korean Geotechnical Society
• /
• v.23 no.12
• /
• pp.33-42
• /
• 2007

The assessment of shear wave velocity($V_s$) in soft soils is extremely difficult due to the soil disturbances during sampling and field access. After a ring type field $V_s$ probe(FVP) has been developed, it has been applied at the southern coastal area of the Korean peninsular. This study presents the upgraded FVP "blade type FVP", which minimizes soil disturbance during penetration. Design concerns of the blade type FVP include the tip shape, soil disturbance, transducers, protection of the cables, and the electromagnetic coupling between transducers and cables. The cross-talking between cables is removed by grouping and extra grounding of the cables. The shear wave velocity of the FVP is simply calculated by using the travel distance and the first arrival time. The large calibration chamber tests are carried out to investigate the disturbance effect due to the penetration of FVP blade and the validity of the shear waves measured by the FVP. The blade type FVP is tested in soils up to 30m in depth. The shear wave velocity is measured every 10cm. This study suggests that the upgraded blade type FVP may be an effective device for measuring the shear wave velocity with minimized soil disturbance in the field.

• Journal of the Korea Society of Computer and Information
• /
• v.16 no.3
• /
• pp.141-147
• /
• 2011

This paper proposes an efficient two-stage fault prediction algorithm for fault detection and diagnosis of induction motors. In the first phase, we use a linear predictive coding (LPC) method to extract fault patterns. In the second phase, we use a dynamic time warping (DTW) method to match fault patterns. Experiment results using eight vibration data, which were collected from an induction motor of normal fault states with sampling frequency of 8 kHz and sampling time of 2.2 second, showed that our proposed fault prediction algorithm provides about 45% better accuracy than a conventional fault diagnosis algorithm. In addition, we implemented and tested the proposed fault prediction algorithm on a testbed system including TI's TMS320F2812 DSP that we developed.

• Journal of the Korean Geotechnical Society
• /
• v.23 no.12
• /
• pp.95-107
• /
• 2007

This study describes compressive characteristics of marine clay at southwestern coast in Korea by large block and piston samples. Through the analysis of disturbance effect and various consolidation test, consolidation result shows that volumetric strain from large block samples is lower than piston samples and compression index of large block samples is larger than piston samples value. We suggest new empirical equation of compression index by the effect of compression index following sampling method. If consolidation settlement is presumed using empirical equation of compression index, the resort will be more reasonable in predicting settlement than that obtained by the decision of compressibility characteristics from piston samples.

• Journal of Korean Society of Forest Science
• /
• v.106 no.2
• /
• pp.204-212
• /
• 2017

Soil disturbance caused by timber harvesting is widely recognized as a potential threat to forest utilization. The degree and extent of soil disturbance is believed to vary with respect to harvesting methods and logging machines. This study has conducted to assess the degree of soil disturbance associated with ground-based cut-to-length (GC) and cable yarding with whole tree (CW) harvesting methods. Soil disturbance was classified using a visual assessment of harvest unit. The properties of soils in different disturbance levels were also evaluated to understand the influence of timber harvesting on soil structure with soil core sampling method. The deep disturbance and soil compaction were observed in sites by 48% and 23% through harvesting areas for GC and CW logging methods, respectively. The results showed that logging machine and number of machine passage had significant influences on soil bulk density and porosity. Soil disturbance types such as rutted, slash cover, and compact were influenced by equipment travel trends in a GC method.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.8
• /
• pp.776-783
• /
• 2011

In modern warfare, jamming for neutralizing the enemy electronic equipments is as important as destroying them by common weapon systems. Noise jamming is a base technique of EA(Electronic Attack) and it is one of the effective jamming techniques. Noise jamming is effective regardless of enemy electronic equipment receiver types. For increasing jamming efficiency using the same output power, noise jamming bandwidth has to be similar to target receiver's bandwidth. Radar jamming source like DRFM(Digital Radio Frequency Memory) requires noise bandwidth changing immediately for time sharing multiple jamming. In this paper, we developed bandwidth changable noise jamming signal for phase sampling type DRFM and do simulation using Matlab for showing the jamming signal output.