• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.13 no.4
• /
• pp.227-237
• /
• 1993

This paper dealt with numerical analysis of sand drain considering the smear effect around drain wells and discontinuous deformation behavior due to difference in rigidity between drain materials and adjacent clayey soils. Biot's equation was selected as governing equation coupled with MODCAM (Modified Cam-clay) model or EVP(Elasto-Viscoplastic) model as constitutive equation. The validity as well as the accuracy of the method developed by author was checked by comparing the proposed method with those by Siriwardane and Ghaboussi using joint element. The FEM analysis developed in this study was applied to both 2-dimensional model foundation and actual foundation. the result of which proved to be satisfactory.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2016.05a
• /
• pp.480-480
• /
• 2016

에코톱은 생태학적 지휘체계(Niche)와 서식처(Habitat)가 결합된 환경을 의미하며 도면에서 최소한의 단위로 일반적인 구성요소의 상태, 잠재자연식생, 잠재생태계 기능으로 균일하게 분류가 가능한 요소로서 천이단계 또는 토지이용이 서로 다른 패치들로 이루진 생태공간을 의미한다. 따라서 에코톱과 비오톱은 식물과 동물의 특정 군집에 요구되는 서식공간의 개념에서는 의미가 같지만 비오톱은 서식공간의 일부분 또는 한 개 이상의 생물이 서식가능한 공간의 개념으로 사용된다. 현재 네덜란드, 스페인을 포함한 유럽국가에서는 에코톱분류를 통한 하천을 관리하는 방안을 제시하고 있으며 이에 대한 많은 연구가 진행되고 있다. 본 연구에서는 만경강 중류 소양천 합류점에서 전주천 합류점까지 약 3.5km 구간의 제외지포함 제내지 1km 폭을 대상으로 1918년 고지도 토지피복을 분류하고, 1948년 해방이전 항공사진, 2003년 2014년 항공사진을 활용한 에코톱을 분류하여 이에 대한 에코톱 다양성지수를 추이분석하여 하천으로부터 떨어진 거리 별 에코톱다양성지수 변화를 분석하였다. 분석결과 과거 제방축조 이전인 1918년 에코톱 다양성 지수는 하천으로부터 멀어질수록 안정적으로 감소하였으나 1948년 이후의 하천은 제내지에서부터 지수값이 급격히 감소한 것을 알 수 있었다. 이는 1948년 이후의 만경강은 과거 1918년 하천에 비해 구하도 공간이 농경지 증가, 보설치 등으로 인한 인위적 교란에 의한 감소로 분석되어지며 에코톱다양성과 밀접한 연관이 있는 생물종다양성 역시 감소하였음을 유추할 수 있다.

• Journal of the Korean Geotechnical Society
• /
• v.28 no.3
• /
• pp.45-54
• /
• 2012

Various geosynthetics are widely applied to civil structures and waste landfill site for reinforcement and water resistance. The use of geosynthetics inevitably involves the coupled behaviors of different materials which include large displacement and strain-softening behaviors, etc. In this study, the effect of chemical element in the leachate on the interface shear strength under the cyclic loading condition was analyzed. The Multi-purpose Interface Apparatus (M-PIA) has been modified and cyclic direct shear tests have been performed. The submerging period of each specimen is 200 days. Additionally, the Field-Emission Scanning Electronic Microscopy (FIB) analysis has been also performed to induce the reason of the variation of disturbance function and verify the hypothesis on the decay-proof ability of geosynthetics. Consequently, the charateristics of chemical degradation of geosynthetic-soil interface are verified and the variation of the disturbance function is mainly caused by the different type of soil mineral decay, based on the FIB results.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.34 no.9
• /
• pp.67-75
• /
• 2006

A fully nonlinear model accounting for swirling effect has been applied in analyzing the dynamic response for a classical swirl injector. The current work applied highly accurate Boundary Element Methods (BEMs) in assessing its static and dynamic characteristics. On the basis of moving surface treatment method and surface instability study, which are obtained from the previous static characteristics analysis in pressure-swirl injectors, this work was expanded for analyzing the dynamics of a classical swirl injector. The dynamic response through injector components for disturbed inflow condition was investigated. The modified code was validated from comparison with the theoretical result for a typical swirl injector. Clearly the simulated result shows the interesting characteristics of swirl injectors to provide either amplification or damping of the input disturbance through each component. These results give promise in applying the current model to nonlinear dynamic characteristics of swirl injectors.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.223-223
• /
• 2023

토양수분은 지표면과 지하 영역 사이에 존재하는 수분 및 열에너지의 분배를 제어하거나, 토양 영양분, 식물 성장 및 미생물 활동과 같은 다양한 환경 과정에 영향을 미치는 핵심 구성요소이다. 토양수분은 생태수문학 및 생지화학적 역학, 저수지 관리, 가뭄 및 홍수의 경고, 토양 수분 변화에 따른 작물 수확량 등을 이해하는 데 매우 중요한 역할을 한다. 따라서, 토양 수분의 정확한 측정은 필수적이며, 이러한 필요성에 따라 중력 측정법, 장력 측정법, 전기 저항법 및 시간-주파수 영역반사측정법 등의 다양한 측정 방법들이 다년간 개발되어 사용되었다. 다만, 앞선 방법들은 철저한 실험을 통해 높은 정확성을 확보하였지만, 토양 교란이 발생하는 단점이 존재하며 실험 현장 토양의 물리적, 생물학적, 그리고 화학적 특성의 보존은 매우 어려운 한계점을 가지고 있다. 따라서, 이러한 단점을 극복하기 위해, 본 연구에서는 레일리파를 이용한 비접촉식 비교란 토양수분 센서 개발을 목표로 한다. 모래, 실트, 점토와 같은 세 가지 특징적인 토양 유형에 따른 파동을 측정하고, 측정된 파동으로부터 토양 수분을 추정하기 위해 기존에 개발된 시간-주파수 방법을 활용하여 토양수분을 함께 측정하였다. 비접촉 파동신호를 토양수분으로 변환하기 위하여, fully convolutional network을 개발하였다. 개발한 모델의 결과 검증은 RMSE(Root Mean Square Error)를 활용하여 검증하였으며, 모래, 실트, 점토에서 각각 0.0131, 0.0021, 0.0034 m³ m^-3으로 상대적으로 높은 정확성을 보였다. 즉, 본 연구에서 제시한 누출 레일리파를 사용한 비교란-비접촉 토양수분 측정 방법으로, 토양을 교란하지 않고 토양수분을 측정 할 수 있는 높은 가능성을 제시하였다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.4A
• /
• pp.621-637
• /
• 2006

Although the approaches implementing strut-tie models are the valuable tools for designing discontinuity regions of structural concrete, the approaches of the current design codes have to be improved for the design of structural concrete subjected to complex loading and geometrical conditions because of the uncertainties in the selection of strut-tie model, in the use of an indeterminate strut-tie model, and in the effective strengths of struts and nodal zones. To improve the uncertainties, a grid struttie model approach is proposed in this study. The proposed approach, allowing to perform a consistent and effective design of structural concrete, employs an initial grid strut-tie model in which various load combinations can be considered. In addition, the approach performs an automatic selection of an optimal strut-tie model by evaluating the capacities of struts and ties using a simple optimization algorithm. The validity and effectiveness of the proposed approach is verified by conducting the analysis of the four reinforced concrete deep beams tested to failure and the design of shearwalls with two openings.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.3A
• /
• pp.411-419
• /
• 2006

In this study, a new approach employing 3-dimensional strut-tie models for analysis and design of 3-dimensional structural concrete with disturbed regions that are not properly occupied by current design codes is proposed. In addition, a computer graphics program for the practical application of the approach is developed. The approach adopts a grid strut-tie model to exclude the subjectivity in the selection of strut-tie model and evaluates the effective strength of concrete strut by considering the 3-dimensional failure criteria of concrete and the deviation angles between the struts and compressive principal stress trajectories. To verify the appropriateness of the approach, nine pile caps tested to failure are analyzed and a bridge pier is designed. The analysis and design results are compared with those obtained by several different methods.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2004.11a
• /
• pp.143-148
• /
• 2004

The numerical analysis of the hard disk drive slider is presented. The pressure distribution was calculated using the finite element method. The generalized Reynolds equation was applied in order to include the gas rarefaction effect. The balance of the air bearing force and preload force was considered. The characteristics of the small vibrations near the equilibrium were studied using the perturbation method. Triangular mesh with variable element size was employed to model the two-rail slider. The flying height, pitching angle, rolling angle, stiffness and damping of the two-rail slider were calculated for radial position changing from the inner radius to the outer radius and for a wide range of the slider crown values. It was found that the flying height, pitching angle and rolling angle were increased with radial position while the stiffness and damping coefficients were decreased. The higher values of crown resulted in increased flying height, pitching angle and damping and decreased stiffness.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2022.06a
• /
• pp.412-414
• /
• 2022

Global Navigation Satellite Systems (GNSSs)을 이용한 위치정보 서비스가 다양해짐에 따라, 전파 교란 및 기만에 대한 GNSSs의 취약성에 대한 우려도 점점 커지고 있다. 이에 미국, 러시아, 유럽 등 자체적으로 GNSS를 보유하고 운영하고 있는 국가조차도 GNSS의 취약성을 보완할 수 있는 부가적인 항법시스템을 개발하고 있다. 그 중 현재 운영 중인 Medium Frequency (MF) 주파수 대역의 신호를 이용하여 Differential GNSS (DGNSS) 정보를 전달하는 인프라를 활용하여 항법 신호를 송출하는 Ranging Mode (R-Mode) 시스템이 유럽과 한국을 중심으로 개발 중에 있다. 하지만 MF 주파수 대역의 신호는 일몰 이후에 전리층 일부가 소멸되면서 상위 전리층에서 신호가 반사되어 지표면에서 강한 세기로 수신되는 특성을 갖고 있다. 이런 특성은 지표를 통해 전파하는 원 신호를 수신하는 과정에 큰 오차요소로 작용할 수 있다. 본 논문에서는 현재 송출되고 있는 R-Mode 신호의 야간 특성을 분석하고자 한다. 현재 충주, 어청도 DGNSS 기준국에서 송출하고 있는 R-Mode 신호를 다양한 안테나 종류로 수신해보고, 항법 시스템의 정밀도 성능에 악영향을 줄 수 있는 특성에 대한 보완방법을 모색하였다.

• Journal of the Society of Naval Architects of Korea
• /
• v.30 no.1
• /
• pp.65-72
• /
• 1993

A numerical method for nonlinear free-surface-wave problem is developed in this paper. The final goal of this study is to simulate the towing tank experiment of a ship model and to partially replace the experiment by the numerical model. The exact problem in the scope of potential flow theory is formulated by a variational principle based on the classical Hamilton's principle. A localized finite element method is used in the present numerical computations which made use of the following two notable steps. The first step is an efficient treatment of the numerical radiation condition by using the intermediate nonlinear-to-linear transition buffer subdomain between the fully nonlinear and linear subdomains. The second is the use of a modal analysis in the final stage of the solution procedures, which enables us to reduce the computation time drastically. With these improvements the present method can treat a much larger computational domain than that was possible previously. A pressure patch on the free surface was chosen as an example. From the present computed results we could investigate the effect of nonlinearity on the down-stream wave pattern more clearly than others, because much larger computational domain was treated. We found, specifically, the widening of the Kelvin angle and the increase of the wave numbers and the magnitude of wave profiles.