• Title/Summary/Keyword: 광PCB

Search Result 8, Processing Time 0.028 seconds

V+Tech 전기-광PCB 기술 - 전기-광PCB 기술이 고속.고화질 전송 시대를 연다

  • 전자부품연구원
    • Venture DIGEST
    • /
    • no.1 s.126
    • /
    • pp.16-18
    • /
    • 2009
  • 구리는 가라. 빛을 통한 신호 전송이 PCB에서도 구현된다.' 구리가 아닌 광 회로를 통해 신호를 전달할 수 있는 광PCB 기술이 한창 개발되고 있다. 광PCB의 전송속도인 2.5Gbps보다 수십 배 빠른 속도를 구현함으로써 고속 데이터 전송 및 처리를 필요로 하는 컴퓨터, 휴대폰, 게임기 등 각종 첨단 분야에 폭넓게 응용되고 있다. 초고속 스피드 시대를 열어 갈 전기-광PCB 기술을 소개한다.

  • PDF

Study on electrical property of solder bump using conductive epoxy (전도성 에폭시를 이용한 솔더 범프의 전기적 특성 연구)

  • Cha, Doo-Yeol;Kang, Min-Suk;Kim, Sung-Tae;Cho, Se-Jun;Chang, Sung-Pil
    • Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
    • /
    • 2008.06a
    • /
    • pp.164-165
    • /
    • 2008
  • 현재의 소자간 연결을 위해 사용되는 금속배선 PCB의 한계로 인해 보다 고속/대용량의 광PCB가 크게 각광받고 있다. 본 논문에서는 광PCB와 소자간의 전기적 연결을 위해 사용되는 솔더 범프를 전도성 에폭시를 사용하여 마이크로 머시닝 공정을 통해 구현하고 제작된 솔더 범프의 I-V 특성을 살펴보았다. 제작된 100 um $\times$ 100 um $\times$ 25 um 와 300 um $\times$ 300 um $\times$ 25 um 의 샘플에서 각각 30 m$\Omega$과 90m$\Omega$의 전기저항을 얻을 수 있었다. 이를 통해 향후 센서및 엑츄에이터 시스템과 광 MEMS 등의 여러 분야에서 전도성 에폭시 솔더 범프를 이용하여 우수한 성능의 플립칩 본딩을 구현할 수 있을 것이다.

  • PDF

국내업계소식

  • Korea Electronics Association
    • Journal of Korean Electronics
    • /
    • v.23 no.12
    • /
    • pp.47-54
    • /
    • 2003
  • PDF

광소자 제작용 레이저 묘화 시스템 개발

  • 김정민;조성학;이응숙
    • Proceedings of the Korean Society of Precision Engineering Conference
    • /
    • 2004.05a
    • /
    • pp.123-123
    • /
    • 2004
  • 최근에 급속히 성장하고 있는 광통신, 전자, 생명산업 등의 발전에 있어서 주목할 만한 경향중의 하나는 제품의 소형화 및 집적화라고 할 것이다. 현재 제조되고 있는 초정밀 미세 가공 부품 및 제조시스템은 반도체 공정에 기반을 두고 생산되고 있다. 반도체 공정은 기본적으로 웨이퍼 규모의 소형제품 제조에 최적화 되도록 제조시스템이 설계 및 제작되어 있다 그리고 광통신 분야에 사용되는 광기능성 소자는 벌크형 광부품 및 광섬유형 광부품 기술에서 평면 광도파로형(PLC) 광부품으로 발전되고 향후 평면 광도파로형 부품은 집적화되어 광IC화로 발전하고 있다.(중략)

  • PDF

Study on Low Temperature Bonding Technology for Optical PCB with Polymer Intermediate Layers (광PCB를 위한 폴리머 저온 접합기술 연구)

  • Cha, Doo-Yeol;Lee, Jai-Hyuk;Chang, Sung-Pil
    • Journal of the Korean Institute of Electrical and Electronic Material Engineers
    • /
    • v.23 no.1
    • /
    • pp.29-33
    • /
    • 2010
  • As the demands for the higher data transmission speed and capacity as well as integration density grow throughout the network, much works have being done in order to integrate the Electrical PCB with Optical PCB. However, one of the most troublesome problems in the commercial bonding process is to need the high temperature for the bonding. Due to the high temperature bonding process, lots of side problems are followed such as warpage and crack, etc. In this paper, we tried to develop the new bonding technology with low temperature around $100^{\circ}C$. As a result of this study, the PCB bonding technology with high bonding strength is demonstrated with the value of bonding strength from 7 to 8 MPa at the temperature of $100^{\circ}C$.

A Study on the design and fabrication of Pluggable Lens for Optical PCB Interconnection (광 PCB 접속용 플러거블 렌즈의 설계 및 제작 연구)

  • Kim, Jung Hoon;Lee, Tae Ho;Kim, Dong Min;Jeong, Myung Yung
    • Journal of the Microelectronics and Packaging Society
    • /
    • v.21 no.1
    • /
    • pp.25-29
    • /
    • 2014
  • In this study, an optical PCB was proposed which can overcome the limitations of the conventional PCB, and a new structure with pluggable lens was considered for a high-efficient passive alignment. The structure was a lens-added optical waveguide for the improvement of misalignment between the lens and the waveguide in the alignment. Also, as it had a barrier-type structure to prevent the surface damage of the lens by desorption, the high-efficient passive alignment can be realized. The structure was designed by optimizing the simulation and the fabrication process of the pluggable lens structure was conducted using the repetitive photolithography and the thermal reflow. The optical waveguide with the lens-integrated pluggable interconnection was fabricated by the imprint process using the polydimethylsiloxane(PDMS) replica mold. Therefore, we confirmed the possibility of pluggable lens-added optical waveguide structure fabrication for high-efficient passive alignment.