• Environmental engineer
• /
• s.323
• /
• pp.86-95
• /
• 2013

본 발명은 해수의 담수화 장치에 관한 것으로, 해수를 증기와 온수로 변환하도록 태양열을 이용하여 상기 해수를 가열하는 가열기와, 상기 가열기에 의해 변환된 상기 증기와 상기 온수를 분리하는 분리기를 포함하며, 상기 가열기는, 오목한 곡면을 갖는 반원통 형상으로 마련되고, 상기 반원통 형상의 길이방향을 따라 위치하는 다수의 초점을 향하여 내면으로 조사된 태양광을 반사하는 반사렌즈 및 상기 반사렌즈에 의해 반사된 상기 태양광의 열 에너지에 의해 상기 해수를 가열하도록, 상기 반사렌즈의 초점이 위치하는 길이방향의 지점을 따라 상기 해수가 흐를 수 있도록 형성되는 유로관을 포함하는 것을 특징으로 한다.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.14 no.3
• /
• pp.43-49
• /
• 2014

This paper presents a theoretical study of transmission performance for an optical duobinary transmitter employed a Mach-Zehnder modulator and a electrical low pass filter at 40Gbps optical communication links. It depends on the bandwidth of the low pass filter in the transmitter, the optical filter and the filter in the receiver. Also, each filter affected to the various parts of the optical power spectrum. By optimizing the bandwidth of each filter, we could control the side robes and the ripples and improve the dispersion tolerance of the transmission system.

• Photonics industry news
• /
• s.9
• /
• pp.38-43
• /
• 2002

본지에서는 한국과학기술정보연구원(KISTI)의 자료 협조를 받아 광산업과 관련된 해외 신기술 동향을 소개하고 있습니다.

• Korean Journal of Optics and Photonics
• /
• v.20 no.1
• /
• pp.57-60
• /
• 2009

We consider introducing an optical thin film to the light guiding wall of a pixel in order to enhance the light guiding efficiency of a CMOS image sensor. Simulating the reflectance as a function of the incidence angle using the Essential Macleod program, we find that the range of total internal reflection is greatly increased for several materials. Particularly when air is chosen as the thin film material, the critical angle of total internal reflection could be shifted to about 50 degrees.

• Proceedings of the KIEE Conference
• /
• 2000.07c
• /
• pp.2266-2268
• /
• 2000

본 논문에서는 스캐닝 미러의 일종으로, 광저장 장치의 픽업헤드용으로 미세회전을 하면서 레이저 빔을 편향시키는 용도로 사용되는 미러를 제작하고 구동실험을 하였다. 제작된 미러의 크기는 $2400{\times}2400{\times}64{\mu}m^3$이고, 빔 스프링은 $500{\times}9.6{\times}64{\mu}m^3$이다. 니켈 전해 도금으로 29${\mu}m$ 높이의 구동 전극을 제작하였고(세가지 모델: 공기통로가 없는 전극, 공기통로와 간격이 각각 200${\mu}m$인 전극, 공기통로와 간격이 각각 100${\mu}m$인 전극), 미러판과 전극을 조립하여(미러판과 전극 사이의 간격은 각각 29${\mu}m$, 26${\mu}m$, 26${\mu}m$) 구동실험을 하였다. 공진 주파수의 계산간은 576Hz, 측정값은 3개의 미러에서 모두 568Hz이었다. 전극과 미러판의 간격이 최대 접근거리 18${\mu}m$가 되도록 미세 회전을 시켰을 때, 공기통로가 없는 전극에서는 공진 주파수가 524Hz, 공기통로가 200${\mu}m$인 전극에서는 544Hz로 각각 감쇠되었고, 공기통로가 100${\mu}m$인 전극에서는 그대로 568Hz이었다.

• Journal of the Korean Society for Precision Engineering
• /
• v.26 no.11
• /
• pp.12-19
• /
• 2009

• Journal of Sensor Science and Technology
• /
• v.4 no.4
• /
• pp.41-46
• /
• 1995

Sensor system which can detect a flowing cell is designed and fabricated by semiconductor processing and EDM(Electro-chemical Discharge drilling Method). Two methods are used in this paper; 1) optical method which measures the trasmitted light through the cell passage between transmitter and receiver, 2) impedance method which measures impedance change between electrodes, when cell flows in the cell passage. Experimental result using tabaco leaves shows that the ouput value by optical method is 0.2V to 0.7V, and the output by impedance method is 0.2V to 2V, which is bigger, but it includes an avoidable noises.

• Progress in Medical Physics
• /
• v.24 no.3
• /
• pp.183-190
• /
• 2013

Recently, the photoacoustic imaging system has been widely and intensively developed, and has been shown the possibility of diagnosis for early stage cancer. In this study, we developed a photoacoustic tomography imaging system with a commercial ultra sound device and a linear array probe. A tube phantom and a chicken breast phantom was made for the possibility of a system as a breast cancer detection. A moving average filter and a band pass filter with 3~6 MHz bandwidth were developed for background noise elimination before delay-and-sum beamforming algorithm was used for image reconstruction. As a result, we showed that some signal processing procedure before beamforming was effective for the photoacoustic image reconstruction.

• Korean Journal of Optics and Photonics
• /
• v.16 no.3
• /
• pp.266-274
• /
• 2005

We have designed photonic crystal based bandpass filters whose characteristics are suitable for WDM communication system. The filters consist of coupled point defect resonators in two-dimensional photonic crystal. The frequency response of coupled resonators has been analyzed by the coupling of modes in time, from which the design parameters for the coupled resonator filters have been extracted. For the appropriate choice of the design parameters, each resonator is treated as a lumped L-C resonance circuit, and from the analogy between the equivalent circuit and the standard L-C filter circuits, the design parameters are simply determined from the table for general filter circuit design. Based on the determined design parameters, a photonic crystal based filter has been designed and its performance has been calculated using the finite-difference time-domain method. The designed filter shows a pass band of 50GHz and 0.5 dB in-band ripple, which is suitable for typical WDM communication systems with 100GHz channel spacing.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.30 no.7 s.250
• /
• pp.765-772
• /
• 2006

Much research efforts have been made on the equal channel angular pressing (ECAP) which produces ultra-fine grains. Along with the experiments, the finite element method has been widely employed to investigate the deformation behavior of specimen during ECAP and the effect of process parameters of ECAP. In this paper, sectional shape change has been investigated during ECAP with the pure-Zr, Zr-702 by using three-dimensional finite element analysis. The results have been compared with experimental results.