• Tunnel and Underground Space
• /
• v.20 no.5
• /
• pp.344-351
• /
• 2010

Slip along a frictional fracture can be approached as initiation and propagation of a mode II crack along its own plane. Fracture mechanics theories predict that under pure mode II loading initiation will occur when the energy release rate of the fracture attains a critical value ($G_{IIC}$), which is generally taken as a material property. For the past few years the rock mechanics group at Purdue University has investigated experimentally the dependence of $G_{IIC}$ on normal stress and on the frictional characteristics of a fracture. A number of experiments has been conducted first on acrylic, a material that, using photoelastic methods, allows visualization of the stress field ahead of the fracture tip; and later on gypsum, a rock model material with relatively low unconfined compression strength. The experimental investigation has been expanded to include other frictional materials with higher unconfined compression strength. Direct shear tests have been conducted on specimens made with cement paste. New observations together with previous experiments indicate that $G_{IIC}$ can only be considered a material property when the peak friction angle of the discontinuity is similar to the residual friction angle; otherwise the critical energy release rate increases with normal stress.

• Journal of the Korean Society of Radiology
• /
• v.16 no.4
• /
• pp.365-371
• /
• 2022

In order to obtain excellent spatial resolution in the PET detector, when the detector module is designed using very small scintillation pixels, overlap occurs at the edges and corners of the scintillation pixel array in the flood image. By using a light guide, the occurrence of overlap can be reduced. In this study, after using a scintillator of 0.8 mm × 0.8 mm × 20 mm to form a 14 × 14 array, 3 mm × 3 mm SiPM pixels are combined with 4 × 4 photosensor to reduce the occurrence of overlap. The optimal thickness of the light guide used for this purpose was derived. Quantitative evaluation was performed based on scintillation pixel images of edges and corners where overlap occurs mainly in the acquired flood image. Quantitative evaluation was calculated through the interval and full width at half maximum between scintillation pixel images, and when a light guide with a thickness of 2 mm was used, the best image was obtained with a k value of 2.60. In addition, as a result of measuring the energy resolution through the energy spectrum, the light guide with a thickness of 2 mm showed the best result at 28.5%. If a 2 mm light guide is used, it is considered that the best flood image and energy resolution with minimal overlap can be obtained.

• Journal of Sensor Science and Technology
• /
• v.8 no.1
• /
• pp.10-15
• /
• 1999

White emission thin film electroluminescent device was fabricated using ZnS for phosphor layer and BST ferroelectric thin film for insulating layer. For fabrication conditions of BST thin film, stoichiometry of target was $Ba_{0.5}Sr_{0.5}TiO_3$, substrate temperature was $400^{\circ}C$, working pressure was 30 mTorr, and A:$O_2$ ratio was 9:1. At this time, dielectric constant was 209 at 1kHz frequency. For phosphor layer ZnS:Mn, ZnS:Tb, and ZnS:Ag were used. Mixing rates of activators were respectively 0.8, 0.8, and 1 wt%. Total thickness of phosphor tapers was 500 nm, thickness of lower insulating layer was 200 nm, and thickness of upper insulating layer was 400 nm. In this conditions, luminescence threshold voltage of thin film electroluminescent device was $95\;V_{rms}$, maximum brightness was $3,000\;cd/m^2$ at $150\;V_{rms}$. Luminescence spectrum peak was observed at region of blue(450 nm), green(550 nm), and red(600 nm).

• Korean Journal of Optics and Photonics
• /
• v.24 no.1
• /
• pp.39-44
• /
• 2013

In this study, we assessed the hydrophilic characteristics of the surface of toughened glass used in smartphones by investigating the optical properties and contact angle characteristics of the plasma device. In this study, the characteristics were different depending on the partial pressure of the gas, input voltage, and degree of ionization of argon gas. In this study, the surface of the toughened glass became more hydrophilic, as indicated by contact angle and light spectrum, after plasma treatment than before the treatment.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.412-412
• /
• 2012

갈륨비소(GaAs)는 수직공진표면방출레이저, 발광다이오드, 태양전지 등과 같은 광전소자에 널리 사용되는 물질이다. 그러나 높은 굴절률을 갖는 갈륨비소는 표면에서 30% 이상의 반사율을 갖기 때문에 광손실로 인해 소자의 성능이 저하된다. 따라서 표면 Fresnel 반사율을 낮출 수 있는 효율적인 반사방지막이 필요하다. 최근, 열적 불일치, 물질 선택, 접착력 저하의 단점을 가지고 있는 기존 다중박막을 대체하는 생체모방 서브파장 나노구조가 활발히 연구되고 있다. 이러한 구조는 공기(air)부터 갈륨비소까지 선형적인 유효굴절률 분포를 갖는 유효 단일박막과도 같기 때문에 소자 표면에서의 광손실을 줄일 수 있다. 더욱이, 자연계의 나방의 각막과 나비의 눈의 구조 형태를 모방한 반도체 생체모방 복합 눈(compound eye)은, 즉 마이크로 렌즈모양과 서브파장 나노격자구조의 복합적 형태, 표면에서 우수한 반사방지 특성을 나타낸다. 본 연구에서는, 포토리소그래피와 유도결합플라즈마 식각법을 이용하여 GaAs 기판 표면에 마이크로 렌즈 모양의 패턴을 형성한 후, 스핀코팅을 이용하여 나노 크기를 갖는 실리카 구를 도포하여 건식 식각함으로써 복합 눈 구조를 갖는 갈륨비소 반사방지막을 제작하였다. 제작된 샘플의 표면 및 식각 형상은 전자현미경(scanning electron microscope)을 사용하여 관찰하였으며, UV-vis-NIR spectrophotometer를 사용하여 반사율을 측정하였다.

• Journal of the Korean Chemical Society
• /
• v.50 no.6
• /
• pp.471-476
• /
• 2006

series of Ca1-xSrxS:Ce phosphors were synthesized by solid-state reactions. The Ca1-xSrxS:Ce phosphors have a strong absorption in region from 430 nm to 470 nm. The emission peaks of CaS:Ce are located at 510 nm and 570 nm. The partial replacement of Ca by Sr in Ca1-xSrxS:Ce causes a blue shift of emission wavelengths. The Ca1-xSrxS:Ce can be used as bluish green and yellow emitting phosphors for white light emitting diodes (LEDs) pumped by the blue LED. We reported the optical properties of Ca1-xSrxS:Ce phosphors for application in phosphor converted white LEDs.

• Proceedings of the KSME Conference
• /
• 2004.11a
• /
• pp.1146-1151
• /
• 2004

Measurements of OH chemiluminescence in an atmospheric pressure, laboratory-scale dump combustor at equivalence ratios ranging from 0.63 to 0.89 were reported. The signal from the first electronically excited state of OH to ground state was detected through a band-pass filter with an ICCD. The objectives of this study are two: One is to see the effects of equivalence ratio on global heat release rate and local Rayleigh index distribution. To get the local Rayleigh index distribution, the line-of-sight images were inverted by tomographic method, such as Abel de-convolution. Another aim is to investigate the validity of using OH chemiluminescence acquired with an ICCD as a qualitative measure of local heat release. For constant inlet velocity and temperature, the overall intensities of OH emission acquired at different equivalence ratio showed periodic and higher value at high equivalence ratio. OH intensity averaged over one period of pressure increased exponentially with equivalence ratio. Local Rayleigh index distribution clearly showed the region of amplifying or damping the combustion instability as equivalence ratio increased. It could provide an information/insights on active control such as secondary fuel injection. Finally, local heat release rate derived from reconstructed OH images were presented for typical locations.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.31 no.5
• /
• pp.500-507
• /
• 2011

Acoustic emission(AE) signals during the polymerization shrinkage of composite resin subjected to the LED light exposure were detected through a wave guide method and a direct sensor attachment method. For PMMA, human tooth, stainless steel substrate, data of AE hits and amplitudes were compared. For the test using the wave guide, AE amplitudes decreased because of the attenuant wave. However, AE hits and 1st peak frequency distribution were not different according to the sensor attachments. Through the experiments, wave guide could be used for a nondestructive evaluation of the marginal disintegrative fracture of dental restoration.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.474-474
• /
• 2013

PDMS는 미세패턴을 위해 소프트 리소그래피 널리 활용되어질 뿐만 아니라, 재질이 투명하고 탄성과 강한 내구성을 갖고 있어 유연한 광학 및 전자소자에 이용될 수 있다. 최근에는, 이러한 PDMS를 서브파장구조(subwavelength grating structure)를 형성하거나 텍스쳐(texture)표면구조를 이용한 효과적인 반사방지막(antireflection coating)기판을 제작하여 태양전지 및 디스플레이 소자의 성능을 발전시키는 연구가 활발히 진행되고 있다. 한편, 수열합성법(hydrothermal method)이나 전기화학증착법(electrodeposition method)으로 비교적 간단한 공정을 통해서 다양한 기판위에 산화아연(ZnO) 나노막대(nanorod)를 수직정렬로 성장시킬 수 있는데, 이러한 구조는 반사방지특성의 유효 굴절률 분포(effective refractive index profile)를 갖고 있기 때문에 LED나 태양전지에 성능을 개선할 수 있다. 이에 본 연구에서는 수열합성법을 통해 성장된 수직 정렬된 산화아연 나노막대를 이용한 PDMS 표면의 미세패턴 형성하여 광학적 특성을 분석하였다. 실험을 위해, 스퍼터링을 통해서 산화아연 시드층을 형성한 후, 질산아연헥사수화물과 헥사메틸렌테트라민을 수용액에 담가두어 산화아연 나노막대를 성장시켰으며, PDMS의 베이스와 경화제의 질량비를 10：1으로 용액을 준비하여 수직 정렬된 산화아연 나노막대 표면을 casting method으로 코팅하여 열경화 처리하였다. 제작된 샘플의 형태, 구조 광특성을 관찰하기 위해서 전계방출형전자현미경, X선 회절 분석기, 분광 광도계를 이용하였다.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.22 no.2
• /
• pp.216-222
• /
• 2013

A solar power generator is usually installed outdoors and it is exposed to extreme environments such as heavy fall of snow and high speed wind. Therefore, the solar tracker structure should be designed to have sufficient static and dynamic stiffness against such environmental conditions. In this paper, eigenvalue analysis of the solar tracker is carried out by varying the pose of the solar panel and unsteady flow analysis around a single tracker or multi-trackers arranged in a line is performed by varying the parameters such as wind directions, wind speeds and the pose of the solar panel to evaluate whether there exists an instability of resonance due to vortex shedding. Finite element eigenvalue analysis shows that natural frequencies and modes are almost not influenced by the pose of the solar panel and the finite element flow analysis shows that there does not exist periodic vortex shedding due to the flow around single tracker or multiple solar trackers in a line.