• 천문학논총
• /
• 제22권4호
• /
• pp.201-209
• /
• 2007

We have preliminarily designed two infrared optical systems of the multi-purpose infrared camera system (MIRIS) which is the main payload of STSAT-3. Each optical system consists of a Cassegrain telescope, a field lens and a 1:1 re-imaging lens system that is essential for providing a cold stop. The Cassegrain telescope is identical for both of two infrared cameras, but the field correction lens and re-imaging lens system are different from each other because of different bands of wavelength. The effective aperture size is 100mm in diameter and the focal ratio is f/5. The total length of the optical system is 300mm and the position of the cold stop is 25mm from the detector focal plane. The RMS spot size is smaller than $40{\mu}m$ over the whole detector plane.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2015년도 추계학술대회
• /
• pp.322-323
• /
• 2015

육지초인용으로 사용하고 있는 전구식 회전형 대형등명기는 고압방전등을 사용하고 있어 고장발생 빈도가 높고 긴급수리에 장시간이 소요되어 기능 유지가 어려우며, 제품 가격이 높아 신규 설치 시 및 등명기 교체 시 비용 부담이 가증되는 문제점이 대두되고 있다. 따라서 기존 광원(메탈할라이트 램프 또는 텅스텐할로겐 램프)의 문제점을 개선하고, 국제항로표지협회(IALA)에서 권고하는 규격을 만족하는 효율성과 안정성이 뛰어난 대형 LED등명기 기술개발의 필요하게 되었다. 본 연구에서는 대용량 LED 모듈 및 반사경을 적용한 광학계를 설계하고, 광도와 반사경의 회전속도 제어하는 광출력/등질 제어시스템을 개발하여 20M부터 27M까지의 광달거리의 광도 가변형 육지초인용 LED 대형 등명기 개발을 수행하였다.

• Current Optics and Photonics
• /
• 제1권5호
• /
• pp.456-467
• /
• 2017

The benefits of network coding in all-optical multicast networks have been widely demonstrated. In this paper, we mainly discuss the multicast service efficiently provisioning problem in the network coding enabled elastic optical networks (EONs). Although most research on routing and spectrum allocation (RSA) has been widely studied in the elastic optical networks (EONs), rare research studies RSA for multicast in the network coding enabled EON, especially considering the time delay constraint. We propose an efficient heuristic algorithm, called Network Coding based Multicast Capable-Multipath Routing and Spectrum Allocation (NCMC-MRSA) to solve the multipath RSA for multicast services in the network coding enabled EON. The well-known layered graph approach is utilized for NCMC-MRSA, and two request ordering strategies are utilized for multiple multicast requests. From the simulation results, we observe that the proposed algorithm NCMC-MRSA performs more efficient spectrum utilization compared with the benchmark algorithms. NCMC-MRSA utilizing the spectrum request balancing (SRB) ordering strategy shows the most efficient spectrum utilization performance among other algorithms in most test networks. Note that we also observe that the efficiency of NCMC-MRSA shows more obvious than the benchmark algorithm in large networks. We also conduct the performance comparisons of two request ordering strategies for NCMC-MRSA. Besides, we also evaluate the impact of the number of the linkdisjoint parallel w paths on the spectrum utilization performance of the proposed algorithm NCMC-MRSA. It is interesting to find that the change of the parameter w in a certain range has a significant impact on the performance of NCMC-MRSA. As the parameter w increases to a certain value, the performances of NCMC-MRSA cannot be affected by the change of w any more.

• Current Optics and Photonics
• /
• 제1권5호
• /
• pp.474-490
• /
• 2017

Since the recent slowdown in the smartphone market, studies for wearable devices are briskly being carried out to find new markets, such as virtual reality devices. In this paper, a head-mounted display (HMD) which provides expanded virtual images before human eyes by enlarging images of a small display was designed, and the tolerance analysis method for a focus-adjustable HMD based on afocal optical systems was studied. There are two types of HMDs: a see-through type that allows the user to view the surroundings, and a see-close type where the user can only view the display screen; the former is used in this study. While designing the system, we allowed a lens within the system to be shifted to adjust its focus from +1 to -4 D (diopters). The yield of the designed systems was calculated by taking the worst-case scenario of a uniform distribution into account. Additionally, a longitudinal aberration was used rather than MTF for the tolerance analysis with respect to system performance. The sensitivity of the designed system was calculated by assigning a certain tolerance, and the focus lens shift was calculated to adjust the image surface variations resulting from the tolerance. The smaller the tolerance, the more expensive the unit price of the products. Very small tolerances may even be impossible to fabricate. Considering this, the appropriate tolerance was assigned; the maximum shift of the focus lens in which the image surface can be adjusted was obtained to find the changes in aberration and a good yield.

• Current Optics and Photonics
• /
• 제2권3호
• /
• pp.261-268
• /
• 2018

Stimulated polariton scattering (SPS) from the $A_1$ transverse optical (TO) modes of $BaTiO_3$ bulk crystal generating a terahertz (THz) wave with the noncollinear phase-matching (NPM) condition is theoretically investigated. To our best knowledge, this is the first report on THz wave generation from $BaTiO_3$ bulk crystal via SPS. Phase-matching (PM) characteristics in the NPM configuration are analyzed. Effective parametric gain lengths for the Stokes and THz waves in the NPM configuration are calculated. The effective parametric gain coefficient and absorption coefficient of the THz wave in $BaTiO_3$ are theoretically simulated. The THz phonon flux densities generated via SPS in $BaTiO_3$ are theoretically calculated by solving the coupled wave equations under the NPM condition. The PM characteristics and THz-wave parametric gain characteristics in $BaTiO_3$ are compared to those in $MgO:LiNbO_3$. The results of the analysis indicate that $BaTiO_3$ is an attractive optical crystal for efficient THz wave generation via SPS.

• 한국해양공학회지
• /
• 제32권5호
• /
• pp.402-409
• /
• 2018

This paper describes the plan and procedure of a development test and evaluation that will be performed to verify the performance and technology of multi-mission unmanned surface vehicles (MMUSVs). In order to verify the design requirement of MMUSVs, we designed and manufactured the common platform of MMUSVs, which have an overall length of8.4 m, a displacement of 3,100 kg, and a speed of more than35 kts. The platform is equipped with several sub-systems, including radar and an EOTS/IRS. The EOTS/IRS, along with the search radar, is used for effective detection, identification, and targeting. The core technologies of MMUSV for DT&E will be investigated. The common platform design technologies, remote operating and control system technologies, autonomous navigation technologies, and unmanned operational technology of sensors and equipment will be studied for the development of the MMUSV's core technologies. The system will be able to make precise observations and track targets both manually and automatically during day and night conditions. Currently, the verification tests for each of the technologies and for the integrated system are in the pipeline for DT&E, which will be performed next year. Also, software reliability and life tests will be performed.

• 한국항해항만학회지
• /
• 제37권6호
• /
• pp.587-595
• /
• 2013

항만건설 및 운영에서 해양교통시설의 설치와 운영은 해상충돌방지 및 안전에서 매우 중요한 인자이다. 그리고, 해상교통시설의 설치 및 운영은 IMO SOLAS 5장 제13조에 의하여 당국의 의무사항으로 규정되어 있다. 해양교통시설은 과거의 시각적(광학, 형상) 시설에서 AIS, DGPS 및 기타 전파표지 등을 활용한 e-Navigation의 개념으로 발전하고 있다. 그러나 이러한 해양교통시설의 자동화 흐름에도 불구하고 선박의 안전한 항해를 위한 광파표지 및 형상표지의 역할은 여전히 절대적이다. 본 연구에서는 시각표지의 운영관리 효율을 향상시키기 위한 해양교통시설 서비스수준의 결정방법으로 해상교통관련 전체 시설을 하나의 관리시스템으로 조합하고 더욱 효율적인 시스템 관리방안으로서 항로표지 운영율을 제안하였다. 해외의 서비스 수준에 대한 비교와 이론적 배경을 분석하고, 제안된 서비스수준을 인천해역에 실제 적용하여 항로의 안전성을 평가한 사례를 제시하였다.

• 한국정보통신학회논문지
• /
• 제18권10호
• /
• pp.2571-2578
• /
• 2014

본 논문에서는 렌즈분할 기반의 시간다중화 3D 집적영상 디스플레이를 위한 컴퓨터적인 요소영상 생성 방법을 제안한다. 제안하는 방법에 대하여 3차원 물체와 요소영상 사이의 기하광학적인 결상관계를 해석하고, 이 결상관계를 통하여 시간다중화 방식의 요소영상들을 생성한다. 요소영상 생성할 때, 제안하는 방법에서는 픽업되는 물체점의 위치가 기존 방식의 위치보다 절반의 분할렌즈 크기만큼 이동된다. 제안한 방법에 대한 기초적인 실험을 수행하고 그 결과를 보고한다.

• 한국레이저가공학회지
• /
• 제6권3호
• /
• pp.19-28
• /
• 2003

The manufacturing process for the microfluidic device can include sequential steps such as master fabrication, electroforming, and injection molding. The laser ablation, using masks, has been applied to the fabrication of channels in microfluidic devices. In this research, an excimer laser was used to engrave microscopic channels on the surface of PET (polyethylene terephthalate), which shows a high absorption ratio for an excimer laser beam with a wavelength of 248 m. When 50-${\mu}{\textrm}{m}$-wide rectangular microscopic channels are ablated with a 500 ${\times}$ 500 ${\mu}{\textrm}{m}$ square mask at a magnification ratio of 1/10, ditch-shaped defects were found in both corners. The measurement of laser beam intensity showed that a coherent image in the PET target caused such defects. Analysis based on the Fourier diffraction theory enabled the prediction of the coherent shape at the image surface as well as the diffraction beam shape between the mask and the image surface. It also showed that the diameter of the aperture had a dominant effect. The application of aperture with a diameter of less than 3 mm helped to eliminate such defects in the ablated rectangular microscopic channels on PET without such ditch-shaped defects.

• 새물리
• /
• 제68권12호
• /
• pp.1374-1377
• /
• 2018

우리는 Hong-Ou-Mandel 간섭 실험에서 95% 간섭가시도를 획득했다. 지난 연구에서 56% 가시도를 획득한 것에 비하면 획기적으로 가시도가 개선되었다. 우리는 제1형 자발적 매개 하향 변환 목적으로 제작된 ${\beta}$-Barium Borate 단결정에 405 nm 단일모드 연속 발진 레이저를 주사하여 만들어진 쌍둥이 광자쌍을 표준적인 Hong-Ou-Mandel 간섭광학계를 거치게 한 후 다이오드 기반 단일광자 계수기와 자체적으로 제작한 동시계수기에 의해 간섭신호를 측정했다. 지난 연구와 이번 연구의 가장 큰 차이점은 광자를 집광하는데 단일모드 광섬유를 사용했다는 점이다. 단일모드 광섬유는 중심부 크기가 매우 작기 때문에 광결정에서 발생하는 여러 서로 다른 모드 광자 사이의 우연한 동시계수를 억제시키는 공간 필터역할을 함으로써 가시도가 개선된 것으로 보인다.