• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1998.04a
• /
• pp.160-165
• /
• 1998

The sub-resonance modes can be easily excited by the assembling tolerance in the asymmetric type optical pick-up actuators, compared with the symmetric type. In this paper, we propose the novel method for reducing the vibration due to the sub-resonance modes where undesirable modes can be decreased by adding the damping, which can be achieved by increasing the flexibility of holder PCB, against to the sub-resonance modes. Using the finite element method, the change of mode shapes is investigated as the shape of holder PCB is modified. Experimental results support that the proposed method reduces remarkably the vibration of sub-resonance modes of the optical pick-up actuator.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2000.11a
• /
• pp.397-400
• /
• 2000

The demands of high data transfer rate and high recording density in optical disk memory device are being increased. In order to achieve high performance, lever actuator for optical disk is proposed. Firstly, the role of lever and structure are discussed and the flexure hinge is introduced to enhance the precise movement. Next is to present the magnetic circuit structure and concept design for the lever actuator. Finally, the dynamic modeling of the lever actuator is found and the analysis results are shown. Consequently, the lever actuator shows the possibility as a pickup actuator for the next generation optical disk.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.11a
• /
• pp.398.1-398
• /
• 2002

A new type actuator has been designed and investigated to overcome thermal problems in slim optical disc drives adopted in mobile storage devices. As the size of optical disc drives decreases, it is more difficult to remove the heat inside a drive and the temperature of an actuator increases. As a result, the second resonance of an actuator moves down to a lower frequency band and the performance of optical parts also deteriorates. (omitted)

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.05a
• /
• pp.496-503
• /
• 2001

The suspension of the optical pickup actuator is damped by the presence of silicone rubber damper bond at its termination. In spite of the presence of it, the actuator still exhibits a strong mechanical resonance which affects its settling time and vibrational characteristics. This resonance can cause errors in reading information from the disk, particularly in high speed CD-ROM and DVD-ROM drives. Ferrofluids are stable colloidal suspensions of sub-micron sized magnetic particles in a carrier liquid. In the actuator design, ferrofluid is applied to the surface of the magnets until the quantity is sufficient to maintain intimate contact with the bobbin/carrier assembly. The fluid is retained in the magnetic field and its viscosity provides the desired mechanical damping to the moving assembly, improving the actuators settling time and vibrational characteristics. Access time is also improved, particularly on warped or eccentric discs.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.05a
• /
• pp.712-717
• /
• 2001

In order to modify flexible mode frequencies, finite element analysis is applied for a lens-holder in pick-up actuator. Several design parameters like shape and local dimension of a lens-holder were selected adequately and sensitivities of the design variables for vibration modes were obtained by FE analysis and this result was used for updating FE model. A sensitivity matrix between the natural frequencies and the design variables was calculated by finite difference method. By comparing the calculated natural frequencies with target frequencies, modification of the design variables was acquired and used for improving FE model. Calculated natural frequencies after several iterations by FE analysis coincided with target frequencies and the errors between them were minimized.

• Proceedings of the Optical Society of Korea Conference
• /
• 2000.02a
• /
• pp.300-301
• /
• 2000

DVD는 CD사이즈의 광디스크에 고화질기 MPEG2 디지털 압축동화를 두 시간이상 수록할 수 있는 기록 및 재생기기로써 최초의 규격서가 1996년 8월에 발행되었다. 650nm의 적색반도체레이저와 개구수 0.6의 대물렌즈를 채용한 광픽업으로 직경 12cm의 단면디스크에 CD-ROM의 약 7배인 4.7GB에서 17GB까지의 용량저장이 가능하다. 변조방식은, DC성분을 억제할 수 있고, 또한 DR(Density Ratio)이 큰 EFM-Plus 변조를 채용하고, 에러정정방식은 32kB를 하나의 블록으로 하는 Reed Solomon Product code이다. File system은, 음성, 화상데이터와 컴퓨터 데이터를 통합할 수 있도록 계층구조로 하고, ISO9669 파일시스템과 UDF파일시스템을 함께 사용하고 있다. (중략)

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.05a
• /
• pp.342-345
• /
• 2004

We design a new actuator in order to achieve 3-axes motion for high performance optical device. The actuator makes it possible to control the tilting motion by using moving magnet and PCB-coil, which have benefits in terms of prices and manufacturing. To predict the features of actuator, especially the effect of moving magnet, finite element method and electro-magnetic analysis are used From comparing simulated data with experimental results, we verified the accuracy of the simulation and the superiority of the present actuator.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.05a
• /
• pp.356-361
• /
• 2004

A moving-magnet type pickup actuator has an assembly error . That is, the actuating part of an actuator is shifted from initial position after we assemble it into yoke. This is the result of an effect of magnetic force between magnet and yoke. We performed magnetic-analysis using FEA. As a result of simulation, we improved the assembl ing efficiency for moving-magnet type actuator.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.05a
• /
• pp.362-365
• /
• 2004

'Coil' occupies a much important position in delivering driving force of optical pick-up actuators. Up to now the main stream has been a winding coil type actuator, but actuators using FP-Coil(Fine Pattern Coil) have been considered for the more compacted and simple manufacturing process and have variously spreaded the application fields by product. We have tried to design actuators using PCB-Coil(Printed Circuit Board Coil) which has benefits in terms of price and manufacturing process. Especially this research has two main things those are to reduce the vibration of sub-resonance and to assure the do sensitivity in the performance of asymmetric optical pick-up actuator with PCB-Coil.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.05a
• /
• pp.183-188
• /
• 2004

Nowadays optical disc drives have become necessary. As the equipment is popular to use, competition of price and rotating rate have been harder and harder. Shock response analysis for the optical disk drives is rarely studied. In this paper the optical disk drive has 5-DOF system and each motion is presented by using Lagrange Equation. As the motion of the Pick up lens is important to read and write data, it needs to consider the pickup and disk. The lumped parameter model is compared with finite element model in order to make sure of the result. Results of the shock response analysis from various shock inputs are gotten.