• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.2
• /
• pp.163-169
• /
• 2005

Photocatalytic oxidation of Cu(II)-EDTA has been studied using solar/$TiO_2$ photocatalysis as an energy source. Photocatalysis efficiency on the treatment of Cu(II)-EDTA was investigated using different types of solar collectors as well as by variation of the angles of solar collector solar light intensities, flow rates, and areas of solar collector. effect of $H_2O_2$ and types of $TiO_2$ catalyst on the treatment of Cu(II)-EDTA was also investigated. Removal of Cu(II) and DOC was favorable with a hemispherical collector than with a flat collector Removal of Cu(II) and DOC increased with increasing angles of solar collector up to $38^{\circ}$. Slurry type $TiO_2$ showed four-times higher removal efficiency than immobilized type $TiO_2$. Removal of both Cu(II) and DOC at a clear sky of solar light intensity ranging from 0.372 to $2.265\;mW/cm^2$ was greater than removal at a cloudy day of solar light intensity ranging from 0.038 to $1.129\;mW/cm^2$. From the result of this research that the removal efficiency of Cu(II) and DOC increased as the solar light intensity increased, it can be inferred that quantum yield in the destruction of Cu(II)-EDTA may directly related with the solar light intensity. Removal of Cu(II) increased as increasing the area of solar collector and was similar at lower flow rates white removal of Cu(II) was interfered at higher flow rates. When immobilized $TiO_2$ was used, removal efficiency of Cu(II) increased in the presence of $H_2O_2$ while negligible effect was found in the use of $TiO_2$ slurry.

• Journal of the Korean Ceramic Society
• /
• v.38 no.7
• /
• pp.621-627
• /
• 2001

알루미나 졸에 평균 25nm의 TiO$_2$(Degussa P25) 광 촉매 분말을 분산하여 광촉매 코팅제를 제조하였다. 점도 약 24 cps를 가지 4.4 wt%의 알루미나 졸로부터 약 300nm 두께의 코팅막이 제조되었으며, 졸 점도의 증가에 비례하여 코팅막의 두께도 증가하였다. TiO$_2$광 촉매의 코팅용 바인더로 이용한 알루미나 졸의 결정형은 25~30$0^{\circ}C$에서 pseudo boehmite (AlOOH)이었으며, 50$0^{\circ}C$ 이상에서는 ${\gamma}$-Al$_2$O$_3$으로 전환되었다. AlOOH/TiO$_2$코팅막은 oleic acid와 humic acid에 대한 기상 및 수상 조건에서의 광 촉매 실험에서 우수한 유기물의 광분해 효능을 나타내었다. 아울러 EGI(Electro-Galvanized Iron)에 코팅된 AlOOH/TiO$_2$코팅막은 내식성 및 내지문성의 효과도 부수적으로 나타내었다.

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 2000.11a
• /
• pp.233-236
• /
• 2000

산업발달과 더불어 급속한 속도로 오염되고 있는 환경문제는 날로 두드려져 그린하우스 효과, 산성비 등의 출현과 더불어 세계 곳곳의 기후이변을 야기하였다. 그 원인은 지구상에서 빠른 산업화 및 과학화로 인하여 화석연료의 과다사용과 그 매연으로 인한 지구환경의 불균형을 초래하였기 때문이며, 지구온난화는 그 좋은 예라고 할 수 있다. 따라서 지구환경 보전문제로서 새로운 유독성 오염물질의 처리기술이 요구되며 에너지 고갈을 대비한 비에너지 소비성 분해기술의 확보가 시급한 실정이다. 그러므로 태양에너지와 같은 무공해 에너지원을 driving force 로 활용하여 유독성 오염물질을 상온에서 완전 분해하여 전혀 무해한 물질로 분해하는 시스템의 개발은 필수적이다.(중략)

• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.6
• /
• pp.155-159
• /
• 2002

This paper describes the development process of mosquito trap with the effect of air cleaning by using the substance-field analysis and evolution pattern of systems in the theory of inventive problem solving (TRIZ). We g(It the concept of the mosquito trap with mosquito attractants instead of mosquito reluctants such as mosquito stick coil and skin medicine with bad and toxic smell. The number of mosquitos traped by one trap near cattle shed per one night in summer, was over 10 thousands with some effects of air cleaning

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2011.05a
• /
• pp.21.2-21.2
• /
• 2011

에어로졸 데포지션(Aerosol deposition) 기술은 상온에서 초음속 유동을 통해 분사된 미세 입자가 기판에 충돌하면서 강력한 결합을 형성하는 방식으로 코팅이 이루어진다. 이 방법은 별도의 소결과정 없이 상온에서도 조밀하고 균일한 박막을 형성할 수 있다. 또한 세라믹, 금속 재질의 다양한 입자를 사용할 수 있을 뿐만 아니라 금속, 유리 기판등에 적용이 가능하다. 본 논문은 이러한 에어로졸 데포지션 기술을 이용하여 광촉매 효과가 뛰어난 $TiO_2$ 입자를 대면적 코팅에 적용가능한 초음속 노즐을 통해 분사하여 ITO기판 위에 박막을 형성하였다. $TiO_2$ 입자의 크기, 기판의 이송 속도와 왕복횟수, 공급 유량 등이 코팅면의 특성과 조성 등에 미치는 영향을 분석하였다. $TiO_2$ 박막층의 형상과 두께는 주사전자현미경(SEM)을 통해 확인하였고, X-ray diffraction (XRD)를 이용하여 코팅 입자와 박막 층의 조성을 각각 확인하였다. 에어로졸 데포지션을 이용한 $TiO_2$ 코팅층은 염료감응형 태양전지(DSSC), 자정작용(self-cleaning), 살균작용(antibacterial effect) 등의 적용분야에 적용 가능할 것으로 판단된다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.10a
• /
• pp.556-559
• /
• 1997

This paper describes the development process of mosquito trap with the effect of air cleaning by using the substance-field analysis and evolution pattern of systems in the theory of inventive problem solving (TRIZ). By the concept of standard solution about introducing S3 substance, modification of S1 (human) and S2 (mosquito) between first substance SI and second substance S2 with harmful effect, we got the concept of the mosquito trap with mosquito attractants instead of mosquito reluctants such as mosquito stick coil and skin medicine w~th bad and toxic smell. The number of mosquitos traped by one trap near cattle shed per one n~ght in summer, was over 10 thousands with some effects of air cleaning.

• Journal of environmental and Sanitary engineering
• /
• v.20 no.4 s.58
• /
• pp.51-58
• /
• 2005

Photocatalytic degradation using $TiO_2$ Particles suspended in a reactor was experimentally performed to degrade the formaldehyde of indoor pollutants. Exponential increase of degradation appears to prove light availability due to the scattering of W light by particles themselves. Comparative removal studies of formaldehyde were done in both cases of dipping and spraying immobilized techniques of $TiO_2$ Particles suspended in solution. Experiments were performed under several different experimental conditions such as initial concentration of formaldehyde, UV intensity and concentration of photocatalysts. Optimal conditions to degrade formaldehyde were obtained under the conditions of $30\;mg/cm^2$ concentration of catalyst and UV intensity of 30 Watt at the distance of 30 cm using immobilized technique by dipping coating.

• Journal of the Korean Ceramic Society
• /
• v.44 no.11
• /
• pp.650-654
• /
• 2007

[ $SnO_2$ ]-doped $TiO_2$ thin films were prepared from tin (IV) bis (acetylacetonate) dichloride and titanium diisopropoxide bis (acetylacetonate) with pluronic P123 or degussa P25 as a structural-directing agent. These hydrolyzed sol were spin coated onto Si(100) wafer substrate. The microstructure, morphology and bonding states of thin films were studied by field-emission scanning electron microscopy (FE-SEM), X-ray diffractometry (XRD), and X-ray photoelectron spectroscopy (XPS). The photocatalytic activity of these films was investigated by using indigo carmine solution.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.7
• /
• pp.420-424
• /
• 2016

In this study, we developed photocatalytic technology to address the emerging serious problem of air pollution through indoor air cleaning. A single layer of $WO_3$ was prepared by using the dry process of general RF magnetron sputtering. At a base vacuum of $1.8{\times}10^{-6}$[Torr], the optical and electrical properties of the resulting thin films were examined for use as a transparent electrode as well as a photocatalyst. The single layer of $WO_3$ prepared at an RF power of 100 [W], a pressure of 7 [mTorr] and Ar and $O_2$ gas flow rates of 70 and 2 sccm, respectively, showed uniform and good optical transmittance of over 80% in the visible wavelength range from 380 [nm] to 780 [nm]. The optical catalyst characteristics of the $WO_3$ thin film were examined by investigating the optical absorbance and concentration variance in methylene blue, where the $WO_3$ thin film was immersed in the methylene blue. The catalytic characteristics improved with time. The concentration of methylene blue decreased to 80% after 5 hours, which confirms that the $WO_3$ thin film shows the characteristics of an optical catalyst. Using the reflector of a CCFL (cold cathode fluorescent lamp) and the lens of an LED (lighting emitting diode), it is possible to enhance the air cleaning effect of next-generation light sources.

• Journal of the Korean Chemical Society
• /
• v.59 no.5
• /
• pp.397-406
• /
• 2015

ZnO, II-VI group inorganic compound semi-conductor, has been receiving much attention due to its wide applications in various fields. Since the ZnO has 3.37 eV of a wide band gap and 60 meV of big excitation binding energy, it is well-known material for various uses such the optical property, a semi-conductor, magnetism, antibiosis, photocatalyst, etc. When applied in the field of photocatalyst, many research studies have been actively conducted regarding magnetic materials and the core-shell structure to take on the need of recycling used materials. In this paper, magnetic core-shell ZnFe₂O₄@SiO₂ nanoparticles (NPs) have been successfully synthesized through three steps. In order to analyze the structural characteristics of the synthesized substances, X-ray diffraction (XRD), scanning electron microscopy (SEM), and Fourier transform infrared spectroscopy (FT-IR) were used. The spinel structure of ZnFe₂O₄ and the wurtzite structure of ZnO were confirmed by XRD, and ZnO production rate was confirmed through the analysis of different concentrations of the precursors. The surface change of the synthesized materials was confirmed by SEM. The formation of SiO₂ layer and the synthesis of ZnFe₂O₄@ZnO@SiO₂ NPs were finally verified through the bond of Fe-O, Zn-O and Si-O-Si by FT-IR. The magnetic property of the synthesized materials was analyzed through the vibrating sample magnetometer (VSM). The increase and decrease in the magnetism were respectively confirmed by the results of the formed ZnO and SiO₂ layer. The photocatalysis effect of the synthesized ZnFe₂O₄ @ZnO@SiO₂ NPs was experimented in a black box (dark room) using methylene blue (MB) under UV irradiation.