• 대한기계학회논문집B
• /
• 제35권11호
• /
• pp.1237-1242
• /
• 2011

인산칼슘 재료는 하이드록시 아파타이트(Hydroxyapatite)와 트리칼슘 포스페이트(Tricalcium-phosphate)를 포함하고 있으며, 인체 골 조직의 무기성분으로 세포 독성이 없고 생체 적합한 성질을 가지고 골 전도성이 있다. 또한 두 재료가 혼합되어 있는 이상 인산칼슘(Biphasic calcium phosphate) 재료는 골 유도성이 있다고 알려져 있다. 이러한 골 조직 재생에 많은 장점을 가지고 있는 인산칼슘 재료는 파우더 타입으로, 3 차원 자유형상의 인공지지체를 제작하는 데 어려움이 있어 고분자 재료에 첨가하여 사용되었다. 본 연구에서는 자유형상 제작 기술을 이용하여 원하는 내/외부 형상을 가지는 3 차원 인산칼슘 인공지지체를 제작하고, 골 조직 재생용 인공지지체로의 사용이 적합한지를 확인하기 위해 MC3T3-E1 를 이용한 세포 증식, 골 조직 분화 실험을 수행하였다.

• 한국재료학회지
• /
• 제29권4호
• /
• pp.221-227
• /
• 2019

This study examines the role of the nano- and micro-particle ratio in dispersion stability and mechanical properties of composite resins for SLA(stereolithography) 3D printing technology. VTES(vinyltriethoxysilane)-coated $ZrO_2$ ceramic particles with different nano- and micro-particle ratios are prepared by a hydrolysis and condensation reaction and then dispersed in commercial photopolymer (High-temp) based on interpenetrating networks(IPNs). The coating characteristics of VTES-coated $ZrO_2$ particles are observed by FE-TEM and FT-IR. The rheological properties of VTES-coated $ZrO_2/High-temp$ composite solution with different particle ratios are investigated by rheometer, and the dispersion properties of the composite solution are confirmed by relaxation NMR and Turbiscan. The mechanical properties of 3D-printed objects are measured by a tensile test and nanoindenter. To investigate the aggregation and dispersion properties of VTES-coated $ZrO_2$ ceramic particles with different particle ratios, we observe the cross-sectional images of 3D printed objects using FE-SEM. The 3D printed objects of the composite solution with nano-particles of 80 % demonstrate improved mechanical characteristics.

• 동력기계공학회지
• /
• 제20권4호
• /
• pp.75-82
• /
• 2016

In this paper, we developed a 3D printing system using a photo-curing resin in order to reduce the surface roughness of a sculpture produced with the 3D printer. Using the pattern of the resulting variable thickness, that gave rise to a stepped shape, and the area error of the photo-curable sculpture, a study was carried out for the process to reduce the surface roughness. At a given value of stage velocity (40~70 mm/s) and output air pneumatic pressure (20~60 kPa), the minimum pattern thickness of the pattern was achieved $65{\mu}m$ and the maximum pattern thickness of up to $175{\mu}m$. To increases the pattern resolution to about $40{\mu}m$, the process conditions should be optimized. 3D surface Nano profiler was used to find the surface roughness of the sculpture that was measured to be minimum $4.7{\mu}m$ and maximum $8.7{\mu}m$. The maximum surface roughness was reduced about $1.2{\mu}m$ for the maximum thickness of the pattern. In addition, a FDM was used to fabricate the same sculpture and its surface roughness measurements were also taken for comparison with the one fabricated using photo-curing. Same process conditions were used for both fabrication setups in order to perform the comparison efficiently. The surface roughness of the photo-curable sculpture is $5.5{\mu}m$ lower than the sculpture fabricated using FDM. A certain circuit patterns was formed on the laminated surface of the photo-curable sculpture while there was no stable pattern on the laminated surface of the FDM based sculpture the other hand.