• Asia-pacific Journal of Multimedia Services Convergent with Art, Humanities, and Sociology
• /
• v.9 no.5
• /
• pp.865-872
• /
• 2019

In this paper, we describe the Solar Car, Woongbi, which was created to participate in the World Solar Challenge(WSC) at the team NeulHaeRang of Korea National University of Transportation. The WSC is the world's largest solar car racing competition and has a separate automobile regulation and must be manufactured to meet the regulations. Therefore, the key point of the solar car design is to optimize the energy efficiency based on the regulations. The solar car's drive system consists of a solar array to convert solar energy into electric energy, a maximum power point tracker (MPPT) controller to track the converted electric energy to maximum output power, a battery to store the produced electric energy, a BLDC (Brushless DC) motor for driving the vehicle by converting energy into mechanical energy, and a motor controller for controlling the BLDC. The optimal design methods for solar energy conversion and electric driving system of battery, motor are presented in this paper.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.16 no.6
• /
• pp.1339-1348
• /
• 2021

There are variety of reasons for renewable energy curtailment, including lack of transmission availability and grid system stability. In the Jeju island region, there are many cases in which the supply of electricity is already increased compared to the demand for electricity due to the increase of solar and wind power generation facilities, and accordingly, the number of curtailments for wind power generation is increasing. This research aims to find the direction of efficient reception of renewable energy and stable operation of the power system using HVDC(High Voltage Direct Current) and BESS(Battery Energy Storage System) facilities that are in charge of power supply in Jeju island. And the paper suggests a practical operation plan for optimal system operation, and the direction of system operation of the land power system due to the expansion of solar and wind power generation facilities in the future.

• Journal of the Korean Electrochemical Society
• /
• v.2 no.1
• /
• pp.17-22
• /
• 1999

Since the use of porous silicon for microsensors and microactuators is in the euly stage of study, only several application devices, such as light-emitting diodes and chemical sensors have so far been demonstrated. In this paper we present an overview of the present status of porous silicon sensors and actuators research with special emphasis on the applications of chemical sensors and optical devices. The capacitive type porous silicon humidity sensors had a nonlinear capacitance-humidity characteristic and a good sensitivity at higher humidity above $40\%RH$. The porous silicon $n^+-p-n^+$ device showed a sharp increase in current when exposed to an ethanol vapor. The $p^+-PSi-n^+$ diode fabricated on porous silicon diaphragm exhibited an optical switching characteristic, opening up its utility as an optical sensor or switch. The photoluminescence (PL) spectrum, taken from porous silicon under 365 nm excitation, had a broad emission, peaked at -610 nm. The electroluminescence(EL) from ITO/PSi/In LED had a broader spectrum with a blue shifted peak at around 535nm than that of the PL.

• Tunnel and Underground Space
• /
• v.31 no.6
• /
• pp.534-548
• /
• 2021

In this paper, the feasibility of generating solar power near an abandoned quarry is examined with the objectives of resolving the essential problems that quarries encounter, such as rockfalls and space usage issues. On an abandoned quarry site in Sadang, Seoul, Republic of Korea, two different PV installation methods were analyzed. The first is attaching PV directly on the quarry slope. Since there are no corresponding safety standards and precedents for installing solar panels directly on slopes, the power generation potential was calculated by using topographic data and reasonable assumptions. The surface area of cut slope section was extracted from the Digital Elevation Model(DEM) via ArcGIS and Python programming to calculate the tilt and power capacity of installable panels. The other approach is installing PV as a rockfall barrier, and the power generation potential was analyzed with the assumption that the panel is installed in the direction of facing solar irradiation. For the derivation of power generation, the renewable energy generation analysis program SAM(System Advisor Model) was used for both methods. According to the result, quarries that have terminated resource extraction and remain devastated have the potential to be transformed into renewable energy generation sites.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.78.1-78.1
• /
• 2010

Recently, as much supplied with new-renewable energy, as much invested in PV system. PV system consists of PV module, PCS and Monitering system, and also could be classified into the type and the capacity by installation method and cost etc. When various systems are installed in the field, it is needed to research for applying in the field and establish infrastructure in order to ensure stable efficiency and reliability. In this study, as the basic design of the demonstration test facility, it is designed the basic PV systems for each capacity to test each PCS. In addition, It is drew the climatic conditions such as insolation, temperature and the design parameters such as installation angle, shades for the local demonstration project and expected the generation of each PV system.

• JOURNAL OF ELECTRICAL WORLD
• /
• s.257
• /
• pp.78-82
• /
• 1998

CD(Computer Disc) 의 약 7배의 용량을 가진 디스크와 그 관련기기가 시판되기 시작했다. DVD(Digital Versatile Disc), DVD-ROM이라는 이 기기는 디스크위에 집광되는 광스포트의 크기를 작게 하여 기록밀도를 높이기 위해, 대물렌즈의 NA,를 0.6으로 크게 하였고(CD에서는 NA가 0.45)광원이 되는 레이저의 파장도 650mm대로 단파장화(CD에서는 780nm)하였다. 이의 실현을 본격화하기 위해서는 DVD에 대응할 수 있는 대용량의 기록미디어와 장치가 필요하다. 이미 CD-R을 비롯한 몇 가지의 추기형, 서환형의 DVD-RAM 등이, 재생전용 DVD가 시판되기 이전부터 제안되어 규격화되었으며 미쓰비시전기에서도 그것에 조준을 맞추어 광원이 되는 고출력 반도체레이저의 개발과 제품화를 추진하여 온 것이다. 여기서는 다음에 제시하는 DVD-RAM용 반도체레이저에 대한 요구성능과 이를 실현하기 위한 방법 및 결과에 대하여 기술한다. $\cdot$파장 650nm대에서 30~50mW의 높은 광출력을 얻을 수 있는 활성층의 재료와 구조의 개발 $\cdot$60$^{\circ}C$의 고온에서도 동작전류 증가가 적은 활성층구조의 최적화 $\cdot$고온, 고출력의 장시간 동작에서도 발광부 단면의 열화를 방지 할 수 있는 단면 강화기술의 개발 동사는 이들 기?과 과제에 대하여 검토를 거듭한 결과 DVD-RAM광원에 적합한 고출력 반도체레이저(MLIxx6시리즈)의 제품화를 실현할 수 있었다.

• Proceedings of the IEEK Conference
• /
• 1998.10a
• /
• pp.775-778
• /
• 1998

근래에 들어 컴퓨터 기술은 멀티미디어 기수의 발달과 더불어 그에 따른 데이터량의 증가로 인해 데이터를 처리, 전송, 저장하는 모든 부문에서의 고속, 대용량화를 요구하고 있다. 이 중에서 특히 저장장치 부문은 응용 프로그램이 대형화되고 멀티미디어화에 따른 데이터량이 크게 증가하는 추세에 있기 때문에 지속적인 용량 증가가 요구되고 있다. 이런 상황에서 주목을 받고 있는 것이 신호처리 방식을 개선하여 저장장치의 기록 밀도를 향상시키는 기술의 하나인 partial response maximum likelihood (PRML) 기술이다. PRML 방식은 HDD 나 광 디스크로부터 데이터를 읽어낼때의 신호처리 기술 중의 ㅎ나로 신호간 간섭을 허용하여 데이터 속도를 증가시키고, 신호를 재생할 때 신호간 간섭을 보상하여 원래 신호를 복원해 내는 기술이다. 이를 이용하면 기존의 기록방식에 비해 기록밀도를 20-50% 정도 높일 수 있다.〔1〕〔2〕

• Journal of the Korean Society for Precision Engineering
• /
• v.22 no.12 s.177
• /
• pp.175-183
• /
• 2005

In recent years, as the demands of VBNS and VDSL increase, the development of kernel parts of optical communication such as PLC(Planar Light Circuit), Coupler, and WDM elements increases. The alignment and the attachment technology are very important in the fabrication of optical elements. In this Paper, the optical alignment characteristic of multi-axis ultra precision stage is studied. The alignment algorithms are studied for applying to the ultra precision multi-axis stage. The alignment algorithm is comprised of field search and peak search algorithms. The contour of optical power signals can be obtained by field search and the precise coordinate can be found out by peak search. Three kinds of alignments, such as 1 ch. input vs. 1 ch. output optical stack, 1 ch. input vs. 8 ch. output PLC stacks, and ferrule vs. ferrule, are performed for investigating the alignment characteristics.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.25 no.9
• /
• pp.26-32
• /
• 2011

The object of this paper is to optimize the battery system for supplying stably power in separate house in which a PV-wind hybrid power generation system is applied. In a power system to be used in a stand alone, it is very important to build optimize the electrical storage system and to utilize it for supplying stably output voltage when there is a shortage of the power generation capacity or there is no sunshine, or when power is to be supplied with a load. This paper provides an optimized method to evaluate capacity of battery by analyzing advantages and disadvantages of the existing battery evaluating method being used in each company for supplying stably power in separate house utilizing the new renewable energy such as a light of the sun.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.1308-1309
• /
• 2011

스마트그리드가 출현함에 따라 향후 배전계통에 태양광, 풍력, 연료전지, 전력저장장치, 전기자동차(V2G) 등의 분산전원의 연계는 급속도록 증가할 것이며 더불어 배전계통은 더욱 더 복잡하게 될 것이다. 이로 인해 발생하는 가장 큰 문제는 계통의 전압변동 문제이다. 복잡한 전압변동 문제를 해결하지 못하면 스마트그리드 계통의 전력품질과 안정도에 악영향을 끼칠 것이다. 스마트그리드 계통 하에서 분산전원의 위치는 변전소 근처 전원단부터 부하 말단까지 전원사업자의 필요에 따라 설치하게 될 것으로 지금까지의 전압변동, 조류계산 등의 모델링 방법으로는 해결하지 못하는 문제가 발생하게 될 것이다. 이 논문에서는 분산전원 배전계통 연계 용량 확대를 위해 실 선로의 실시간 전압 측정값을 이용한 분산전원 연계 스마트그리드 계통의 통합 전압관리안정화 방법에 대해 제안하고자 한다.