• Title/Summary/Keyword: 광신호

Search Result 213, Processing Time 0.031 seconds

All-optical Binary Half Adder Using SLALOM (SLALOM을 이용한 전광 반 가산기)

  • 김선호;이성철;박진우
    • Proceedings of the Optical Society of Korea Conference
    • /
    • 2001.02a
    • /
    • pp.74-75
    • /
    • 2001
  • 현재의 통신망에서는 clock recovery, regeneration 등을 전기적으로 처리하고 있으나 처리속도의 한계가 있고, 미래의 초고속 네트웍은 이러한 전기적 신호처리의 속도한계를 극복하는 기술이 필요하다. 그러므로, 고속의 광교환과 광신호처리 등 광신호를 전기적으로 바꾸거나 제어하지 않고 전광으로 처리하는 기술에 대한 연구가 진행되고 있으며 이러한 전광신호 처리에 고속의 전광 논리소자가 요구된다. 초기의 전광 논리소자 연구에서는 AND, OR, NOR, XOR 등의 기본 논리 기능이 주로 구현되었으며 이를 활용하여 Shift Register, Binary counter, 전광 반가산기, 직/병렬 데이터 변환기와 같은 복합기능 논리소자의 구현 연구가 이루어지고 있다. (중략)

  • PDF

A Study on Temperature Compensation of Burst Mode Fiber Optic Transmitter using Digital Architecture (버스트 모드 광송신기의 디지털 방식에 의한 온도보상에 관한 연구)

  • Chai, Sang-Hoon;Kim, Dong-Gyu
    • Journal of the Institute of Electronics Engineers of Korea SD
    • /
    • v.44 no.11
    • /
    • pp.36-42
    • /
    • 2007
  • In this paper, we have studied temperature compensation architecture for a bust mode optical transmitter to convert the electric burst mode date signal to a optical one through the laser diode. In order to get stable high speed data transmission, we used digital sampling technique with a microprocessor for the temperature compensation of the laser diode, not the previous real time analog technique. Though the digital automatic power control circuit should be complemented the previous analog one with accuracy and effectiveness. So the digital technique will be more effective in further future in development for the over Gb/s transmitting speed.

Performance Evaluation of an All-optical Automatic Gain-controlled Erbium-doped Fiber Amplifier for Suppression of Signal Fluctuation in Terrestrial Free-space Optical Communication Systems (자유 공간 광통신 시스템에서 신호 변동 억제를 위한 전광 자동 이득 조절 어븀 첨가 광섬유 증폭기의 성능 평가)

  • Jeong, Yoo Seok;Kim, Chul Han
    • Korean Journal of Optics and Photonics
    • /
    • v.33 no.3
    • /
    • pp.99-105
    • /
    • 2022
  • We have evaluated the performance of an all-optical automatic gain-controlled (AGC) erbium-doped fiber amplifier (EDFA) to suppress the optical signal fluctuation induced by atmospheric turbulence in terrestrial free-space optical communication systems. In our measurements, the input power into the EDFA was set to be -30 dBm and -10 dBm to operate the amplifier in the small-signal and saturation regions, respectively. The fluctuations in the optical signal were emulated with an acousto-optic modulator driven with a sinusoidal voltage. From the measured results, we have found that an all-optical AGC EDFA could suppress the optical signal fluctuation effectively, as long as the EDFA operated in the small-signal region with a high feedback amplified spontaneous emission (ASE) power.

Transmission of 2.5Gbps Optical Signal Converted from 155Mbps 16 Channels Electrical Signal (전기적 신호/광신호 변환 양방향 전송기술)

  • Choi, C.G.;Hwang, G.
    • Electronics and Telecommunications Trends
    • /
    • v.15 no.4 s.64
    • /
    • pp.33-40
    • /
    • 2000
  • 본 논문은 현재 교환시스템의 시스템 랙(rack)간 전송에 사용되는 전기적 신호전송 매체의 한계인 155Mbps 또는 250Mbps에서 15m의 전송거리라는 제약을 극복하고 또한 기존의 단순 동기식 전송방식(1:1)에서 탈피하여 다중/역다중 접속방식(16:1)을 채택하여 고밀도, 저가격, 다중화/역다중화 기능을 포함하는 광송수신 모듈을 개발한 내용을 기술하고 있다. 본 기술은 155Mbps 16채널의 전기적 신호를 2.5Gbps 광신호로 변환하여 양방향으로 전송할 수 있는 Twin-ax/Optical Bus Access Module 개발에 관한 것이다.

Implementation of the Burst Mode Fiber Optic Transmitter by Digital Temperature Compensation Architecture (디지털 온도보상에 의한 버스트 모드 광송신기의 구현)

  • Kang, Ho-Yong;Chai, Sang-Hoon
    • Journal of the Institute of Electronics Engineers of Korea SD
    • /
    • v.46 no.8
    • /
    • pp.12-17
    • /
    • 2009
  • We have implement어 a bust mode optical transmitter using digital temperature compensation architecture with a microprocessor. Instead of previous analog real time technique, we used digital sampling and holding technique for the temperature compensation in order to get stable high speed data transmission of the laser diode. This digital temperature compensation technique should be complemented the previous analog method with accuracy and effectiveness in the over Gb/s transmitting application.

디지탈 X선 촬영술의 기술 발전과 전망

  • 민병구
    • 전기의세계
    • /
    • v.34 no.9
    • /
    • pp.548-552
    • /
    • 1985
  • 서울대학교 병원에서는 약2년간의 이분야에 대한 기초 및 임상연구 결과를 토대로 하여 D.S.R.System을 개발하고 있다. 현재 개발하고 있는 Systme은 다음과 같다. 1) X선 발생장치 및 Control부분 2) 산란효과 제거를 위한 fore-slit 및 after-slit과 구동장치 3) X선을 광신호로 변환하기 위한 rare earth screen과 광신호를 전기적인 신호로 변환시키기 위한 photo-diode array detector의 결합체, 4) data 수집부분, 증폭장치와 A/D변환기, 고속 data 저장용 기억장치 부분 5) data 처리와 display를 위한 Bit-slice processor 5) Picture Archiving and Communication Systems (PACS) 이러한 부분 이외에 SNR을 향상시키고 좁은 부위의 region of interest를 보다 정확하게 관찰하기 위해서 511p/mm의 고밀도 선형검출기를 병행으로 사용하고 있다. 이 선형검출기를 이용하여 일부의 영상을 관찰하여 그 결과를 Wiener filter 등의 방법의 매개변수 선정에 이용하여 전체적인 영상의 질을 향상시키고자 하는 것이다.

  • PDF

Chromatic dispersion compensation with chirped fiber grating (비주기 광섬유 격자를 이용한 광선로 색분산 보상 특성 연구)

  • Park Tae-Sang;Jeong Ki-Tae;Song Kil-Ho
    • 한국정보통신설비학회:학술대회논문집
    • /
    • 2003.08a
    • /
    • pp.40-41
    • /
    • 2003
  • 대용량 정보 통신 선로로 이용되고 있는 단일모드 광섬유에서, 초고속. 장거리 광신호 전송에서 발생하는 색분산(Chromatic dispersion)을 보상하기 위하여 비주기 광섬유 격자(Chirped fiber Bragg grating ; CFG)를 적용하여 그 특성을 조사, 분석 하였다. 10Gbps의 전송 시스템에서 80km 단일모드 광섬유 전송후의 색분산에 의한 광신호 품질 열화 및 CFG에 의한 보상 특성을 측정하기 위하여 BER 과 eye pattern 테스트를 하였다. 또한 기존에 색분산 보상용으로 사용되고 있는 분산 보상 광섬유(Dispersion compensation fiber ; DCF)와 특성 비교을 하였다.

  • PDF

Design method for optical transversal filter with an optical amplifier (한 개의 광증폭기를 이용한 광트랜스버셜 필터)

    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.25 no.1B
    • /
    • pp.105-111
    • /
    • 2000
  • To realize a desired characteristics of an optical transversal fitters, The number of optical amplifiers as same as the lentgh of a given transfer function is needed In this paper, we consider an optical transversal filter that uses only one fiber amplifier, which can realize a constant(=$\alpha$) times of a given transfer function with e as large as possible in order to make use of optical signal energy. We also present some applications using this optical fiber filter.

  • PDF